Twin-shaft shredder

Santa Andrea G 25/860

Condition: used, Year of manufacture 2003 2.2 kW Crjdpfx Aiow Upn Ejzei 3.0 HP including documentation, COC

Condition: new, Year of construction: 2026, The ball mill is ideal for mineral ores. Credpspahwvsfx Aizei

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Csdpfx Aisrp E Nnezsri

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Cjdsua Tbwepfx Aizori Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Crjdpfjmqi Aksx Aizji

Year of construction: 2025, condition: new, Standard version with column Csdpfxegn Tzlo Aizeri Motorized height adjustment 700 mm Articulated arm length 2 x 1,100 mm Height adjustment of the grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and mounting template Grinding tools available as an option Request more information

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Year: 2023, never used, still in its original packaging. Codpfx Aiexr Hgxszeri

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: Crodpfexlngasx Aizsi - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD Compact is a semi-mobile screening machine for efficient processing of soil, gravel, wood chips, waste, and recycling materials. It delivers high-precision separation, flexible operation, and reliable performance for construction sites, recycling plants, and material processing facilities. Key Features: • Modular design with interchangeable drums & quick-change system • Adjustable screen inclination & variable drum speed (5–20 rpm) Crsdpjw Ryl Hjfx Aizoi • Up to four fractions per drum segment with cleaning brush system • Optional bunker expansion for +50% input capacity • Compact, semi-mobile design with easy transport & setup Tech Highlights: Drum Ø 1.3 m · L 2.1 m · Mesh Ø6–Ø100 mm · Qmax 20–50 t/h · n 5–20 rpm · P 5.5–7.5 kW · Weight 1500 kg · Screening surface 7 m²

Condition: new, 50 linear meters of Jungheinrich MPB pallet racking, new New item, see pictures Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam capacity per level/bay: 3000 kg Negotiable price: €12,750 net, ex warehouse Offer includes: + 19 units of pre-assembled frames, depth 110 cm, height 9 m + 144 units of beams, length 2.7 m, 3000 kg capacity per level/bay + 288 units of safety locking devices + 78 units of concrete anchors Load capacity signs, documents, etc. are included. Additional accessories can be found in the accessories catalog. Frames are blue, infill panels are galvanized. Heights from 3.5 m to 9 m in stock. Bay load capacity: 12 tons. Beams are yellow. Item is in stock. Transport and assembly are available upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions; all prices are excluding VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer truckloads of goods delivered weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF BUSINESS: ONLINE AUCTIONS & UTILIZATION For dismantling and clearance orders, we offer a complete, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete warehouse stocks including complete clearance. Cedpfolp Ntgjx Aizori 2. Commission-based auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!