Crane truck

Scania R 730 LB8x2 V8 FASSI F1650 RA.2.28 XHE- DYNAMIC...

Year of construction: 2009, condition: good (used), Load capacity: 30 t Dujdpfx Agjqiz N Rj Aop Fine lift Lifting height 9 meters

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm Dusdefg E Hlspfx Ag Aep total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) Dodsd Iipmopfx Ag Aoup • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: excellent (used), mileage: 2,95,000 km, power: 405 kW (550.65 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, operating hours: 1,828 h, Equipment: air conditioning, power mirror, trailer coupling, = Additional options and equipment = - Aluminium fuel tank - Brake booster - Low noise - Air suspension - Sun visor - Xenon lighting - Power take-off (PTO) Duedpfx Ajw Rc E Ajg Aop - Towing hitch = Further information = Axle configuration Front axle: Steering Rear axle 1: Steering Weights Unladen weight: 18,505 kg Payload: 11,070 kg Gross vehicle weight: 29,500 kg Functionality Cargo space dimensions: 420 x 255 cm Crane: Yes Superstructure brand: Palfinger PK 53002-SH G CE marking: yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: used, Number of boring spindles 10 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Duodpfx Agew H Iv Ts Asp Feed speed 6-36 m/min.

Condition: good (used), Year of construction: 2002, operating hours: 5,900 h, functionality: fully functional, machine/vehicle number: 74343, working width: 1,350 mm, grinding belt length: 2,620 mm, grinding belt width: 1,370 mm, Wide belt sander Bütfering Optimat SBC 313 Year of manufacture: 2002 Model: Optimat SBC 313/QCE/Classic - with 3 units (see attached photo for description) - sanding from above Working width: 1350 mm Abrasive belt width: 1370 mm Abrasive belt length: 2620 mm Cross belt width: 150 mm Cross belt length: 4700 mm For more detailed information, see the photos Dedpfx Agoqvl D Ho Asup

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. Dsdjtwm Ubopfx Ag Asup This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.

Year of construction: 1998, condition: ready for operation (used), A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible. Djdpswv Umwefx Ag Aoup

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system Duodpferi Slmsx Ag Asp - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 Dedsu Dw I Ejpfx Ag Aeup With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.