Chucking Automatic Lathe - Multi Spindle

SCHÜTTE SG18

Condition: used, Year of construction: 2002, SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (stepless): 800 – 10,000 rpm Main times (stepless): min. / max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Redsymdd Sjpfx Ag Nep Feed motor torque: 18 Nm Dimensions (incl. bar guide): approx. L x W 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: Bar feeder Pra 52 P IEMCA RUEZ KF0WW2/312 DAS, year 2002

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Rjdpfjwwa U Aex Ag Njp Production hours: approx. 46,400 The machine can be inspected under power Immediately available

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Rodpfx Agsg S Tx Ij Njp

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 spindle passage: 18 mm Redpfxjluhcgj Ag Nsp turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm Rsdowzynqjpfx Ag Nop turning speeds 5.000 U/min max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: used, Year of construction: 2007, turning diameter 18 (16) mm control Siemens spindle circle diameter 180 mm bar feed max. 80 mm longitudinal slide -travel 50 (63) mm cross slide - travel 20 (32) mm Spindlespeed 800 - 8.000 min/-1 power capacity - main spindel 11 kW Torque 18 Nm dimensions of the machine ca. 6,0 x 1,5 x 2,2 m weight of the machine ca. 5,5 t CNC-Bar-Automatic-Turning Machine SCHÜTTE - SG 18 - Co2 fire extinguishing system Kraft&Bauer - Ruez scraper belt conveyor - IEMCA bar feeder PRA 52 42 F Redpfxsvanqre Ag Nep - Tool package - Curve package - various clamping devices

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 23-07, TECHNICAL DETAILS Number of spindles: 6 Spindle bore: 18 mm Turning length: 63/50 mm Spindle drive motor: 11 kW Max. bar diameter (solid clamping system) round: 18 mm Max. bar diameter (solid clamping system) hexagon: 16 mm Spindle diameter: 180 mm Bar feed: up to 80 mm Standard longitudinal slide travel (total travel/working travel): up to 63/50 mm Special longitudinal slide travel (total travel/working travel): up to 90/72 mm Cross slide travel (total travel/working travel): 32/20 mm Spindle speeds, continuously adjustable: 800 - 10,000 rpm Cutting times, min./max., continuously adjustable Selectable: 0.24 - 45 s Non-productive time: 0.4 s Rated power of the drive motor: 11 kW Rated torque of the feed motor: 18 Nm Rodpfxswmckxj Ag Nop MACHINE DETAILS Machine weight: approx. 4.5 t Dimensions: 2,950 / 5,420 x 1,230 x 2,050 mm

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Redpfx Asv Rwltjg Nop Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control Redpom Nb Rijfx Ag Nep >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive Redpfx Agovp Sd Ij Njp - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².