Coil line

SCHLEICHER

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls Chedozrpu Eepfx Ailoa - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Chodjrq D Niopfx Ailoa The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 Csdpszrpufjfx Ailjha diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Cjdozrpr Djpfx Ailoha Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Chsdpfx Ajrfx Utsiloa Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: good (used), Year of construction: 1983, 1 used SCHLEICHER strip straightening machine with unwinding reel Maximum sheet width: 320 mm Minimum sheet thickness: 0.8 mm (customer has also processed 0.4 mm) Maximum sheet thickness: 3 mm Number of upper straightening rollers: 3 Number of lower straightening rollers: 3 Diameter of straightening rollers: 70 mm Total power consumption: 1.4 kW Codpfx Aezphauoiloha Machine dimensions L x W x H: approx. 1300 x 1200 x 1800 mm Machine weight: approx. 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Schleicher 3 unit drilling machine after lignum renovation. Chodpfxet Ndznj Ailja Machine equipped with upper units 3 pieces .Pneumatic pressure .Working realized by forcing the button unit the rest of the automatic .Choice of units possible each one or all .Speed and depth of drilling the possibility of setting .Machine after major repair .New electricity and driver .Net price vat invoice warranty one year .The machine can be additionally equipped with rulers bumpers pressures and drilling heads of any spacing .

Year of construction: 2023, condition: like new (used), functionality: fully functional, 1x BKRS gantry crane Working load: 2 x 20,000 = 40,000 kg Span: 29 m Cantilever: 2 x 8.9 m Lifting height above rail: 10 m Hook path: 13.5 m Radio remote control Csdpfx Ajyx Dv Tsiloha Cable reel suitable for 90 m Complete with crane rail UIC60, length: 2x 180 m

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Chedezlbqfjpfx Ailja Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Second-hand machine For dowel drilling on flat or end faces with roller-bearing-mounted drill shaft and tapered claw coupling Driven by any hand-held drill Csdozk Nq Depfx Aileha Working width 650 mm with 7 drill shafts Swivelling drilling beam 0° – 45° – 90° Clamping height 80 mm Minimum drill hole spacing: 30 mm Availability: at short notice Storage location: Flörsheim

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm Chsdpfofn Aqljx Ailsa total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Cam switches, circuit breakers, tap switches, rotary switches, cam switching devices, miniature micro pushbuttons Cedpfx Aiszkrv Nsljha -Manufacturer: Schleicher, cam switches -Type: PK 15 -Voltage: 220V 50Hz -Dimensions: 235/110/H110 mm -Weight 1.1 kg

Condition: good (used), Position processor, SLAVE CPU POSITIONING -Manufacturer: SCHLEICHER, 2-axis positioning assembly -Type: USP21 -No.: 31506913-310 -Number: 2 modules available -Price: per piece Chedpfx Aieymltbsloa -Dimensions: 150/35/H200 mm -Weight: 0.6 kg/pc.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Codpjk Dz N Iofx Ailoha

Condition: good (used), Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KZT01 Chsdpfx Aisb A Rxzslea -5-100 s Price: per piece -Quantity: 5 available -Weight: 0.2 kg