COVER LABELING SYSTEM

SCHLEUTER GU 2 DO

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: Bwjdpfxsuigzps Ag Hon 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Parts shown by hand not come. Bedpfx Ager Urm Se Hswn

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial number: 203130 Year of manufacture: 2015 Operating hours: 47,247 h Control system: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Handling interface Thermoplastic screw/cylinder 35 mm, highly wear-resistant - Complete documentation and software (on CF card) - German language - From first owner - origin Germany - Continuous maintenance by the manufacturer and previous owner Visible peripheral devices are not part of the offer - only if they are explicitly mentioned. Injection unit: Screw diameter: 35 mm Injection weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit: Clamping force: 50 tons / 500 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke/force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany Bodpfx Agjv U Tl Ds Hewn For information about the machines we offer and our company: - We only sell machines that we have purchased from current production and which are stored in our Hanover warehouse. - All offered machines are inspected and tested before removal. - We do not sell insolvency goods - we are not a broker dealing with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be viewed in our warehouse and are powered on.

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Bwodjvvi Nbepfx Ag Hjn

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Bwjdpoq U Rm Hsfx Ag Hsn Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm Bwjdpjvwgq Sjfx Ag Hsn z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg Bwsdpfxstvf Hte Ag Hjn - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm Bjdped I R E Nefx Ag Hewn table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Bwodopkyn Ropfx Ag Hon Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Bsdpfxop R R Dws Ag Hswn Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. CEE machine, incl. documentation Stationed: Denmark