Plate Shear - Mechanical

Schröder MHSU 1500/4.0

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Iiedpjulc Ixefx Ahneg Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request Iodpfxjxabc Rs Ahnsig The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: new, The folding gitterbox by Mega-M is made of steel wire mesh that is resistant to mechanical damage. It is protected by a galvanic coating that protects the metal from corrosion. The metal basket has a hinged lid on the long side, which guarantees convenient access to the stored goods. The basket container is used for transporting and storing goods. It is also used for transporting and displaying wine bottles. Advantages of the Gitterbox Mega-M basket: - High durability and resistance to external factors. - Stackable up to 4 pieces. - Easy access to stored goods thanks to the hinged lid on the long side. - Maximum load capacity of up to 1,500 kg. - Extensive use in a variety of industries. - Possibility of storing and transporting goods without the use of EURO pallets. - Small dimensions when folded save storage space. The offer concerns the gitterbox: Product code :MTP001422. Height (cm): 89 Iedpfxou Tr Ame Ahnjig Width (cm): 120 Depth (cm): 100 Load capacity (kg): 800 Finish: Galvanised Net price: EUR 65.00 per item The offer applies to the gitterbox mesh container: Stock code: MTP001419. Height (cm): 98 Width (cm): 125 Depth (cm): 105 Load capacity (kg): 500 Finish: Galvanised zinc plating Net price: EUR 94.00 per item The offer applies to the gitterbox mesh container: Stock code: MTP001420. Height (cm): 98 Width (cm): 114 Depth (cm): 84 Load capacity (kg): 800 Finish: Galvanised zinc plating Net price: EUR 97.00 per item The offer applies to the gitterbox mesh container: Stock code: MTP001421. Height (cm): 102 Width (cm): 120 Depth (cm): 90 Load capacity (kg): 800 Finish: Galvanised zinc plating Net price: EUR 105.00 per item The offer applies to the gitterbox Article code: MTP001400. Height (cm): 91 Width (cm): 120 Depth (cm): 100 Finish: Galvanised Load capacity (kg): 1500 Net price: €123.00 per item Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * I have large quantities ... * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Year of construction: 2024, condition: new, Motorized sheet metal shear Technical data Cutting capacity: 2.5 mm Cutting length: 2550 mm Cutting angle: 1°40′ Stroke rate/min: 35 1/sec Motor power: 3 kW Back gauge range: 550 mm Table width: 400 mm Table height: 850 mm Height: 1260 mm Width: 1350 mm Length: 3100 mm Weight approx.: 1540 kg Iiodpfjhk Nf Rex Ahnog

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm Ijdpfxju Rni He Ahneig distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Year of construction: 2022, condition: new, Motorized plate shear MS 1303 Iiodpfx Ahehk Nfuenog Technical data: Sheet metal width: 1350 mm Sheet metal thickness: 3.0 mm Distance between uprights: – Table width: 400 mm Working height: 850 mm Control: conventional

Year of construction: 2000, condition: good (used), Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Ijdji Eld Uspfx Ahnjig Machine weight approx. 11000 kg

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale Ijdpeuagxpjfx Ahnoig - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Year of construction: 1999, condition: ready for operation (used), Euromac hydraulic punching machine Isdopmt Ttepfx Ahnjig Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Ijdpfoxq Eyuox Ahnjig