Roller curve conveyor with drive

Schulz

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator, Fodpfx Aasy Nm I Ho Negb

Year of construction: 2001, condition: good (used), Heavy duty roller conveyor 2 pcs. driven overall height: 600 mm width: 1400 mm Fsdsh Icrnepfx Aa Nsgb length 7000 mm All dimensions are approximate Plant is immediately available, already dismantled

Condition: used, Cold area with an annual capacity of 1,000 to 3,000 hl, consisting of 1 fermentation vat: Kaspar Schulz, 13.43 hl, year of construction: 2000 2 fermentation tanks: 1 x Kaspar Schulz, 24.22 hl, year of construction: 2000 1 x Kaspar Schulz, 42.19 hl, year of construction: 2000 4 storage tanks: 4 x Kaspar Schulz, 21.5 hl, year of construction: 2000 6 bright beer tanks: 6 x Kaspar Schulz, 11.22 hl, 3 bar, year of construction: 2000/2001 2 centrifugal pumps: 1 x Hilge, mobile, 15 m3/h, 2.7 bar, year of construction: 2000 1 x Hilge, mobile, 15 m3/h, 2.5 bar, year of construction: 2013 1 desi tank, 1 x cylindrical stainless steel tank on feet with side outlet, year of construction: 2000 with pipework and switch cabinet for automatic cooling system. Additional title: with centrifugal pumps and disinfection tub Features: Fermentation vat, 2 x fermentation tank, 4 x storage tank, 6 x pressure tank, 2 x centrifugal pump, 1 x desi tank, pipework and control cabinet for refrigeration control Fgedpfsw Td Dlex Aa Nsb

Year of construction: 1991, condition: used, Fermentation tank with two dished bottoms. - 4 tanks with 52 hl butto content each - 2 tanks with 79 hl gross capacity each Additional title: vertical stainless steel tanks Fgsdpsvcqzxefx Aa Nsb Total volume: 79 hl storage tank 2 pcs. Operating pressure: 0 bar Operating temperature: 20 °C Width: approx. 1400 mm Height: approx. 4100 mm Material: Stainless steel 1.4310 Position: vertical Base construction: 4 x pipe feet, height-adjustable Features: Side manway; CIP piping; outlet valve (butterfly valve)

Condition: good (used), Features: * Used roller conveyor * Condition: good ( used ) * Feet to order separately * Condition: fully functional with traces of use * Ideal for fast material transport * Professionally disassembled and packed * 24V technology * Incl. sensors and light barriers ( pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Zero pressure accumulation Drive: 24V technology Total width approx.: 740 mm Conveyor width: 655 mm Roller pitch: 75 mm Fgjdpfsff Hgtox Aa Neb The system consists of 5 segments: 2 x 2,250 mm each 3 drive rollers 2 x 540 mm each 1 drive roller 1x 2775 mm 5 drive rollers each Details of the frame height: 150 mm width: 40 mm Max. Weight of the conveyed material 50Kg Roller conveyor The roller conveyor is ideal for interlocking machines or workstations in the picking zone and for optimizing internal processes. During transport, the roller conveyor can convey sensitive and differently sized containers, boxes or other packaging and item units to the loading or delivery point and also serves, for example, as a connecting line in front of or between production and processing machines. It also enables efficient parts transport in the plant and warehouse and is used to convey considerable volumes and distances. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be pleased to prepare your individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 2001, condition: used, Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated. Individual sale conceivable. Additional title: year of construction 2000/2001 Gross content: 1122 l Fedpfxjw Td Epj Aa Njgb Perm. working overpressure: 3 bar Perm. working temperature: 20 °C Content cooling zone: 5 l Length: 1000 mm Width: 1000 mm Height: 1700 mm Material: stainless steel Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Condition: used, Year of construction: 2002, CIP tanks for water, caustic, acid and disinfectant. Additional title: 4 vertical vessels Volume: 1270 l Caustic tank, acid tank, disinfectant tank Material: Stainless steel Fgsdpfx Aasxbpibo Neb Features: Water tank, 870 l; Caustic tank, 1270 l; Acid tank, 1270 l; Disinfectant, 1270 l

Condition: used, functionality: fully functional, Year of construction: 2009, Span: 35 m Fgjdpfx Aot D H H Aea Neb Load capacity: 130 tons Including 2 x 75 m rail A75 Drawings on request / drawing on request No hoist unit / no hoist Can be adapted to an overhead/gantry crane

Condition: used, Year of construction: 1993, Storage tank with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets Additional title: 2 vertical tanks Total volume: 83 hl Operating pressure: 0,9 bar Operating temperature: 20 °C Width: approx. 1800 mm Height: approx. 4030 mm Material: Stainless steel 1.4301 Position: vertical Base construction: 4 x pipe feet Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping Fsdpfxoxbqh Es Aa Negb

Condition: used, Fermentation cellar with tanks, equipped with 2 dished heads. - 2 tanks with 83 hl gross content each, with 2 x cooling zones - 4 tanks with 52 hl gross content each - 2 tanks with 79 hl gross capacity each. Fgjdpfexbn Rkex Aa Nob Additional title: Years of manufacture 1991 - 1993 Features: 2 Tanks, each 79 hl; 4Tanks, each 52 hl; 2 Tanks, each 83 hl

Condition: new, Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1000 1.600 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 8 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable Fodpfstxn Ewjx Aa Negb * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by telephone to find a suitable solution for your application.

Condition: used, Schulz roller conveyor 90°-580-530 IR795 RA1244 Technical data: Manufacturer: Schulz Angle: 90° Useful width (NUB): 530 mm Nominal/outside width (NB): 580 mm Inner radius (IR): 795 mm Drive: centered Fgodpfxok Aa N Re Aa Nsb Conveyor speed: v = 0.30 m/s Rollers: Type: G6/50 plain bearing with conical plastic molded part Transport weight: 85 kg Scope of delivery: without supports and side guides (please enquire if required) optional Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Fgsdpfx Aek Aa Iwja Neb including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 working days Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2023, condition: new, Attachment suited for: Hoisting equipment Fjdpfsph Rk Tsx Aa Njgb Selling price: € 15.500, US$ 16.480 A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us

Condition: used, Schulz roller curve 90° roller curve conveyor 450-390 IR800 RA1185 Make: Schulz Angle: 90° Useful width: 390 mm Nominal/outer width: 450 mm Inner radius: 800 mm Conveyor speed: v = 0.35 m/s incl. lateral guides on both sides Roll type: G6/50 plain bearing with conical plastic moulding Fgjdpfx Aajk Aa H Io Nsb Transport dimensions: L x W x H = 1600 x 550 x 600 Transport weight: 100 kg Scope of delivery: without supports (if required, please inquire) Optional: Supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik