Jointer & thickness planer combined

SCM FS 520 pneumat.Tischöffnung/Centrofix

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Ledpfjtwz Tlsx Adwohb Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: like new (used), Year of construction: 2011, I sell the combined machine format sliding table saw with scoring + spindle moulder Manufacutrer: FELDER Austria Model: KF700S. Lsdpfx Adjr Alzpewohb Year 2011. Cutting length 3200mm. Cutting height 95mm. Saw blade and spindle moulder tilting 0-45° Saw blade and spindle moulder height adjustment digital Digital display for parallel fence and working height. Turn on the main saw blade and scoring unit from the sliding carriage. Main motor format sliding table saw 3,0 KW / (3200/4500/5800 rpm adjustable) Scoring motor format sliding table saw 0,75 KW Main motor Spindle moulder 5,5 kW Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Including full documentation and CE Certificate.

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry Lodpeh S Nz Sjfx Adwjhb - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: new, ELMAG reversible vibratory plate RPB30-50 with Honda GX200 engine, 30 kN centrifugal force, with steel protective frame Vibratory plates, reversible With stepless hydraulic switching between forward and reverse as standard. This allows large areas to be compacted with powerful machines. Vibratory plates with very high compaction performance in a wide range of versions to suit customer requirements. On all models, the machine is protected against damage by a high-quality steel protective frame. Incl. transport hook. Special accessories - Rubber mat incl. holder - Wheel set ADVANTAGES Infinitely hydraulically adjustable forward and reverse travel Self-tensioning clutch system for reduced V-belt wear Crack and break-resistant base plate made of hardened steel Guide bar can be locked in vertical position during transport or storage New protective cage offers reliable protection for the motor and the device Extra strong rubber bearings installed Easy to mount transport wheels TECHNICAL DATA Centrifugal force 30 kN Max. Speed 20 m/min Area compaction 600 m²/h Engine type Honda GX 200 Power 4 kW Plate size 500x710 mm Working width 500 mm Lhedot Eggropfx Adwob Vibration frequency 81 Hz Weight 181 kg

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG Lodsv Sbpxepfx Adwshb

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm Lhedpfeixupmex Adwsb large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch - 3-knife cutter block - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 Lodpfexdknwsx Adwohb The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Ledpfx Aovwfg Eodwshb

Condition: used, Year of construction: 2020, total length: 3,920 mm, - Arbeitshöhe max. 14,30m - Plattformhöhe max. 12,30m - Plattformhöhe – eingefahren 1,65m - Plattformlänge – außen 2,79m - Plattformlänge – außen, ausgeschoben 4,32m - Plattformausschub – Länge 1,52m - Plattformbreite – außen 1,60m - Höhe der Fußleiste 15 cm - Max. Personen auf der Plattform (innen/außen) 3/2 - Tragfähigkeit 363 kg - Tragfähigkeit – mit ausgefahrenem Plattformausschub 136 kg - Verfahrbar in voller Plattformhöhe 12,3m - Fahrgeschwindigkeit – eingefahren 7,2 km/h - Fahrgeschwindigkeit – ausgefahren 0,5 km/h - Steigfähigkeit – eingefahren 35% - Wenderadius – innen/außen 2,11m/ 4,6m - Hub-/Senkzeit 61/43 sec - Neigungs-Sensoraktivierung (Längsachse/Querachse) 3° / 2° - Nivellierung mit max. Abstützungen Längsachse/Querachse) 5,3° / 11,7° - Reifenkontaktdruck 641 kPa - Bodenlast 10,56 kPa - Schall- & Vibrationspegel Ljdpfxexpx Uvj Adwehb - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s²

Condition: ready for operation (used), Technical characteristics Shaft 50 mm Length 200 mm Cast iron frame Table 800 mm Ledpfsrr I Utjx Adwjhb Lateral tenoning carriage Max. workpiece width 400 mm Presser Max. tool Ø 250 mm 3 speeds Power and Motors Voltage: 380 V Motor: 5 CV Overall dimensions