Planer-thicknesser SCM MiniMax FS4

SCM MiniMax FS41

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Godpfxjhkz E Tj Ah Hoil Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: good (used), Year of construction: 2001, saw band length: 4,500 mm, total height: 2,100 mm, roll diameter: 600 mm, Cutting height 300 mm Cutting width 570 mm Table size 610x700 mm Extraction 120 mm Band saw guide above and below Stop Gsdpfx Aovt Sxgeh Hoil Total height of the machine approx. 2100 mm

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Godpfxjvwga He Ah Hoil

Condition: used, Wheel diameter: 500 mm Storage location: Nattheim Gijdpfx Ahewl D S Ue Hsl

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm Gjdpfohfufgox Ah Heil -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Gisdpfxox H Ud Ro Ah Hel Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: Holz-Her 3 rolls -Speeds: 3,000, 5,000, 6,000, 10,000 rpm -Dimensions: 1220/770/H1650 mm -Weight: 588 kg Gedpfx Ahecp Txws Hjil

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide Gsdjw Rhkqepfx Ah Hoil 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Godohpmawopfx Ah Heil Weight: 178 kg

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: As new, machine is unused Features and technical specifications: - Saw band speed: 850 / 430 m/min - Flywheel diameter: 530 mm - Saw band length: 3,865 mm (min. 3,840 mm / max. 3,872 mm) - Saw band guides: precision guides above and below Gisdpfx Ahjw E Tzle Hjl - Max. cutting height at 90°: 270 mm - Max. cutting width with fence: 474 mm - Max. cutting width without fence: 514 mm - Worktable length: 535 mm (max. 685 mm) - Worktable width: 535 mm - Worktable height: 945 mm - Worktable extension length: 535 mm - Worktable extension width: 150 mm - Worktable tilt: -10° to +45° Note: From 20° tilt, for safety reasons a clamping device or fence is required to prevent the workpiece from slipping. - Extraction port diameter: 2 × 120 mm - Output: 2.25 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Scope of delivery: - Mitre fence ±60° - Laser device for cutting line marking - Saw blade set: 1 × Saw band 3865 x 10 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 20 x 0.5 mm, 4 TPI 1 × Saw band 3865 x 25 x 0.5 mm, 4 TPI Dimensions: 1,020 × 850 × 1,982 mm Weight: 163 kg Availability: short-term Location: Saxony-Anhalt