Wide belt sanders SCM Sandya 10S

SCM Sandya 10S

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Tsdpfx Acovvkfwe Njf

Condition: used, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm Tsdpformucxex Ac Nsf sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Todpfxjudxchj Ac Nef Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 437.0COLIBRI, power: 8 kW (10.88 HP), compressed air connection: 6 bar, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 630 mm, Well-maintained wide belt sander available Tjdpfx Acsuh Sccj Njf 2 rollers for pre-sanding and fine sanding 2 feed speeds Electrically adjustable height with digital readout Sanding width: 630 mm 2 extraction ports Assistance with loading can be provided.

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 Todpfownickex Ac Njf - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive in X-axis; ball screw drive in Y- and Z-axes • Axis travel: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Worktable: - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) (Optimat BHC200) • Control system: HOMAG PowerControl/woodWOP Todpswx Iidjfx Ac Nsf • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: Good; very well maintained, serviced regularly / last service 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens Industrial PC) - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining of a wide range of materials • Ideal for joineries, furniture manufacturers, and custom productions • Reliable performance even for demanding projects Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION DEVICES - Side and rear safety fencing - Three-segment safety tread mat in the front area allows loading of workpieces in the non-active working zone Inspection and test run on site are welcome! Dismantling and transportation are to be arranged by the buyer.

Condition: used, Year of construction: 2002, Nominal flow rate: 3500 m³/h. Motor: 1.5 kW. Baffle area: 2000 x 1000 mm with top and side baffles. Tjdpjvviz Rofx Ac Nef Storage location: Nattheim.

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush Tjdpfxogi Dryo Ac Nsf - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Condition: used, cutting width max. 610 mm Cutting height max. 150 mm Saw blade diameter 600 mm Motor output 9,2 kW turning speeds 2750 U/min Required air-pressure 7 bar work height max. 900 +- 20 mm Dimensions (L/W/H) 770x1385x1370 mm SALVAMAC Legend 600 the semi-automatic chop saw ----- - Maximum cutting area 420x150/520x100/610x30 mm (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Engine power of the saw motor 9.2 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 600 mm, Z=132. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section: 420x150/520x100/610x30 mm Saw blade motor power: 9.2 kW Saw blade diameter: 600 mm Saw blade type: HM Z=132 Saw blade rotation speed: 2750 rpm Air consumption per cycle: 7 Nl Intake nozzle: 2 x 140 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!) Tjdsvnv U Ujpfx Ac Nof

Condition: good (used), Year of construction: 2003, overall weight: 1,900 kg, Paoloni Kalibra 30 - maximum sanding width 110 cm - one 15 kW motor - first unit with a metal roller, - second unit with a grinding shoe and a rubberized roller Tsdperumipjfx Ac Nef - shoe control from the table - weight 1900 kg. The machine works very well.