Saw and milling machine

SCM ST 350 S

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate Gjdjndhdtjpfx Ah Hobg

Condition: good (used), Gabbiani SA 300 multi-saw Gedpfxohcwrks Ah Hobg - Italian production TECHNICAL SPECIFICATIONS: cutting width 300 mm engine power 40 kW cutting height 100 mm smoothly adjustable feed feed speed range 8-56 m / min blade diameter 300 mm spindle diameter 50 mm sleeve diameter 70 mm 3 upper pressure rollers minimum material length 700 mm table top dimensions 1750 x 700 mm three rows of pawls height from the base 740 mm stub diameter 2 x 150 mm dimensions (length / width / height) 270/170/160 cm

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Gedpjxta Dysfx Ah Hjbg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Gbjdpfx Aev Aywpoh Heg

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Gbodpfjgzlpkex Ah Hsg Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm Gbsdpfxoiwbfue Ah Hog No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: new, 1 brand-new universal milling head "HURON" system Make: EMENA Gedobpmv Sopfx Ah Hsbg Model: V 0, ISO 40, normal Technical data: Mounting ISO 40 Projection 270 mm Rated drive power 5 HP Max. speed 1800 rpm Weight approx. 32 kg Design: Standard, with adapter plate / mounting flange finished on the head side, unmachined on the machine side, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any kind, "HURON" system Option: - Raised version Delivery time: approx. 3 months, after receipt of order and payment Illustrations are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool. Gedpfx Ahsvgnb Rj Hjbg

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H Gbodpfxefn Ndds Ah Hjg + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: excellent (used), The CFS Krämer+Grebe 325-liter vacuum bowl cutter is a high-performance machine designed for efficient meat processing. Machine equipped with a cooking option. Main features: Bowl Capacity: 325 liters, suitable for medium to large-scale production. Motor Power: 138 kW, providing robust performance for demanding processing tasks. Cutter Blade Speed: Infinitely variable from 60 to 4,100 rpm, allowing precise control over the cutting process. Mixing Speed: Stepless, with forward and reverse options, enabling thorough and adaptable mixing for diverse products. Bowl Speed: Stepless control for optimized processing efficiency and flexibility. Cutter Bowl Design: Equipped with a raised cutter rim to enhance safety and minimize spillage during high-speed operation. Gbedsu E Tlpepfx Ah Hsg Vacuum Functionality: Reduces air incorporation, improving product texture and extending shelf life. Noise Protection: Includes an electro-hydraulic V2A noise protection cover for quieter operation. Loading and Ejector: Features an electro-hydraulic loading system and an electro-hydraulic product ejector, streamlining loading and discharge. Knife System: Incorporates the GEA Top-Cut knife system with a quick-locking nut (Quick-Lock-Nut) for efficient knife head fastening. Cooking Device: Equipped with a cooking device, allowing for integrated cooking processes within the cutter. Construction: Made from durable stainless steel for longevity and hygiene. Control Panel: Equipped with an analog control panel for straightforward operation and precise control over cutting, mixing, and bowl speeds. Incl. Extra main motor (used, very good working condition), extra control panel and extra electric box with Lenze inverter (complete)