2 Colors

Shinohara 52-2

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 20,02,10,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Cpodpfjw R Enmox Agkjw Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: ready for operation (used), Year of construction: 2006, Technical Specifications Cedpfoydip Uex Agkopw Cutting Width, Max 920 mm 36.22 in Feeding Depth 920 mm 36.22 in Loading Height, Max 130 mm 5.12 in Knife Speed 45 cycles/min 45 cycles/min Smallest Cut, Automatic (without false plate) 25 mm 0.98 in Smallest Cut, Automatic (with false plate) 90 mm 3.54 in Clamp Pressure, Min 150 daN 331 lbs Clamp Pressure, Max 3,500 daN 7,716 lbs Backgauge Speed (return way) 200 mm/sec 7.87 in/sec Machine Weight approx. 2,000 kg approx. 4,400 lbs Dimensions (Width x Depth) 1,770 mm x 2,030 mm ~69.7 in x ~79.9 in Power Supply 380V (3 Phase, 50Hz typical) Key Features Control Interface: The 92 XT model features a 15-inch color touch-screen display for operation and programming. Programming: It is a high-performance programmable model, suitable for high-end applications, with job-specific programmable parameters, label and distortion correction. Table Features: It typically includes a chromed air table and enlarged side tables to facilitate material handling. Safety: Equipped with safety beam guards (photocells) and an electronic knife lock for operator protection. Backgauge Drive: Features a ball screw drive for the backgauge, ensuring precise positioning. OptiKnife System: Allows for knife replacement from the front desktop, enhancing safety and convenience.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65 h, functionality: fully functional, Ryobi 525 HXX - Year 2001 Size 36 x 52 cm, PCS-H printing control Cpodsx N Smzepfx Agkow Ryobimatic AAC dampening, Technotrans cooling and recirculation, Semi-automatic plate changers, Blanket wash, roller wash. Powder spray 65 million impressions Available immediately

Condition: good (used), Year of construction: 2023, functionality: fully functional, Tiger 125 Premium, DOM: 04/2023, installed 02/2024, processed approx. 100,000 m2 of thermal plates. Fully functional and ready for transport. Cpsdjxg Hynopfx Agkew Off-white processor for thermal/conventional applications * Touch screen control panel (GNUCII) with full functionality * Developer configured for thermal applications (2 x brush) * Developer fill pump * Developer conductivity monitor * Drip tray * Developer filter (50 micron woven 10”) * Recirculating (water-saving) water rinse with 1 x brush / Gum / Drying unit * Container level sensor probes (alerts for full/empty), 3 sensors Integrated cooling solution Integrated option to configure for either tap water or water-saving mode Optional interfaces for most CtPs G&J Remote Enabling and WebConnect service tools Single phase power connection (worldwide) incl. power cord Day-to-day delivery on ECO-friendly open pallet and plastic wrapping The processor is worldwide electrically configurable and complies with CE/UL requirements

Condition: like new (used), Year of construction: 2014, with unloader EL 130-4, #8493054, year of manufacture 2014 Cpodpfx Agex R Tq Dokew with LW 1000-4, #787B011, year of manufacture 2008 with jogger RA-4, #8482053, year of manufacture 2014

Condition: used, Year of construction: 2003, Offset 2 color Ryobi 522HE Year: 2003 Number of impressions (mio): 21 Machine control - Lateral and diagonal register adjustment - Size adjustment by means of pre-programmed sheetstop Feeder - Streamfeeder - Double sheet control Printing units - Number of printing unit(s): 2 - Straight machine - Ryobi RPC semi automatic plate change - RyobiMatic dampening - Impression cylinder with double diameter - Automatic inking roller washing device - Cooling system: Technotrans alpha.d Delivery - Powder spray Cpsdpfx Agexzppzokow - Anti static device Accessories - Chromed cylinders Max. output (s/h): 11000 Max. sheet size (mm): 520 x 375 Min. sheet size (mm): 100 x 105 Max. print size (mm): 505 x 350

Condition: good (used), Offering several Ricoh SPC840 A3 colour printers with low page counts. The devices come from expired leasing contracts. Further details upon request. Csdpot Ivu Dsfx Agkopw

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle Cpedpfx Aew D E Sasgkew – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Cleaning liquid full. Included with the used Brother GTX PRO Bulk : Cjdpok Rkpnefx Agkopw 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 13500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Cpodpeykr Rzsfx Agkew