Chip crusher

SPYRA

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material - Warranty available upon request! - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Fjdpfx Apow N Rv Ts Djgh Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h Fgjdpfox S Ibgex Ap Djh We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Fsdpfjw Nqu Aox Ap Degh Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr Fgsdpfx Apjw Nq Amo Doh The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, System: Decanter Type: Alfa Laval DSNX 4250 Year of manufacture: 1995 Speed: 2950 rpm Fodovz Rwkepfx Ap Dsgh Gearbox: 2.71 Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Fodpfxoyzhdyo Ap Degh Weight: 2,000 kg Motor power: 22 kW Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Fjdpfsua D U Isx Ap Degh Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Fedsht Rl Ejpfx Ap Djgh Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Fsdpfexgt U Eex Ap Djgh Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Fgjdovfm I Topfx Ap Deh Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine