Floor Plates

STOLLE

Condition: ready for operation (used), Measuring plate / cast plate / layout plate / stand, type 4000x1500x1300mm incl. 2 x tailstocks -Plate dimensions L x W x H 4000x1500x1300mm -2 x tailstocks / center height 400mm -Adjustable feet Nsdo Aazgaspfx Airjlh -Total weight approx. 2500 KG Errors and omissions excepted.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine Nodpfsthuzpex Airjlh - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), Marking plate for welding, cast iron + steel 1 piece, 2000x4000, thickness 100mm 2 pieces, 1000x2000, thickness 40mm, ribbed 1 piece, with grooves, 2400 x 4400 mm 1 piece, 4600x2300, thickness 460 mm 1 piece, 800x2000, with substructure Nlodpfxsxmkfbe Airoh

Condition: excellent (used), Year of construction: 2021, overall weight: 8,000 kg, total height: 300 mm, total length: 6,000 mm, total width: 2,000 mm, Make: STOLLE Type: TDG 6/2 Year: 2021 Floorplate Length: 6000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 6000mm Width: 2000mm Height: 300mm Weight: 8000kg Nlodpfoxf Exgex Aireh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm Nedpfx Aijv T Nqaorslh gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: excellent (used), overall weight: 4,600 kg, total height: 300 mm, total length: 4,300 mm, total width: 1,500 mm, T slotted bed plate STOLLE - . MACH-ID 9173 Floorplate Length: 4300mm Floorplate Width: 1500mm Height: 300mm No. Of T-slots: 4 Distance from T to T-slot / Jump:330mm T -slot size: 30mm Weight a plate approx.: 4600kg Number of matching pieces: 2 Length: 4300mm Width: 1500mm Height: 300mm Weight: 4600kg Nljdpfx Aiswxwm Ssrsh

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Nsdpfx Ajz H Iymoirelh Delivered with 12 leveling feet Weight : 6,3 T

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Nljdpoz An S Refx Airsh Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: good (used), Year of construction: 2001, overall weight: 8,500 kg, total height: 350 mm, total length: 5,000 mm, total width: 2,500 mm, plate height: 350 mm, plate width: 2,500 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - DTR MACH-ID 9790 Make: STOLLE Type: DTR Year: 2001 Nledpfxjzw E Hzs Airsh 8 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2500mm Height: 350mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 36mm Weight a plate approx.: 8500kg Number of matching pieces: 1 Length: 5000mm Width: 2500mm Height: 350mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 8,000 kg, total height: 370 mm, total length: 5,000 mm, total width: 2,250 mm, plate height: 370 mm, plate width: 2,250 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - RDT MACH-ID 9791 Make: STOLLE Type: RDT Year: 1990 12 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2250mm Nledpfozw E A Nox Aireh Height: 370mm No. Of T-slots: 7 Distance from T to T-slot / Jump:320mm T -slot size: 41mm Weight a plate approx.: 8000kg Number of matching pieces: 1 Length: 5000mm Width: 2250mm Height: 370mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Nlodpfoza Apaex Airsh Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: good (used), Year of construction: 1990, overall weight: 3,900 kg, total height: 300 mm, total length: 3,520 mm, total width: 2,000 mm, plate height: 300 mm, Floorplate Length: 3520mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Nljdezw Ezrjpfx Airjh Weight a plate approx.: 3900kg Number of matching pieces: 1 Length: 3520mm Width: 2000mm Height: 300mm Weight: 3900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000 Nsdpfxezw Eyzs Airslh     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 Nedsy D Ngzopfx Airelh NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Nedpfx Aozu N Ukeirjlh Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. In good condition.