Gantry Crane

Teichmann

Year of construction: 1991, condition: excellent (used), Track centre distance approx. 40.0 m Projections usable on both sides/total approx. 10.0/14.0 m each Dedpfx Aoqcu Tfea Njut Lifting height/hook path approx. 8.0 m Make/new body AUMUND/TEICHMANN Year of manufacture/new superstructure 1991/2024 Crane equipped with: - Double-rail trolley accessible with DEMAG electric hoist, optionally with double hoist units and conversion to slewing trolley - Cab control travelling with the crane, optional radio remote control - Scissor guide for load stabilisation with slewing gear for motor grab connection

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm Duodpfob N Eh Hex Aa Not band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Year of construction: 1987, condition: refurbished (used), Span approx. 40,00 m Jib unilateral, fixed leg side, total approx. 6,5 m Lifting height/hook path approx. 8,0/10,0 m Duodpfjmdruzsx Aa Not - Single rail trolley SWF - Radio remote control and floor control

Year of construction: 1987, condition: used, Gantry slewing single level-luffing jib crane constructed for 4-rope grab operation as well as hook operation Capacity grab operation approx. 8,0 to at an outreach of approx. 12,0 up to 25,0 m Capacity in hook operation max. approx. 12,5 t Lifting height above rails with jib approx. 25,0 m max. approx. 22,9 m Span original/actually approx. 6,0/5,2 m Make TAKRAF/TEICHMANN Year of construction/complete overhaul - modernisation 1987/2005 Total weight only approx. 90,0 t Crane equipped with under ridable full-portal, intermediate column to increase the boom pivot point, complete enhousing of the top crane, modernisation with completely new Dsdpjdlazgofx Aa Njut electrics (FU control), cabin, control chair, motor-cabledrum and new painting in 2005 Working speeds: Main hoisting gear actually/optimized approx. 52,0/65,0 m/min Retracting gear approx. 35,0 s Slewing gear approx. 1,2/2,4 rpm Crane travel gear max. approx. 50,0 m/min

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40 Duedpfx Aaeylw Ste Net

Year of construction: 2006, condition: like new (used), Span approx. 8,6 m Total height/lifting height approx. 5,2/4,2 m Total hook path approx. 20,0 m Operating hours only approx. 88 Year of manufacture 2006 Dujdpfofd Rx Rox Aa Njt Crane equipped with: - STAHL monorail trolley of short design - Load display - Radio remote control

Year of construction: 2007, condition: good (used), Special price until 28.02.2021! Capacity approx. 45.000 kg Span approx. 29.000 mm Hook path approx. 14.000 mm Make TEICHMANN Reconstruction 2007 Hoisting class H3 Stress group B4 Mechansim group FEM/ISO 3m/M6 Dodsghrcfopfx Aa Nsut Crane equipped wiht: - high quality whinch trolley - cabin and radio control - one sided walkway - accesssible trolley - rope drum without hook movement - load weighing

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Duedjxtyvpjpfx Aa Nst Shipping via freight carrier possible, please enquire with postcode Collection preferred

Year of construction: 2005, condition: excellent (used), Track centre distance currently approx. 35.0 m Projections Fixed support usable/total approx. 6.1/10.7 m Swing support usable/total approx. 4.5/8.4 m Lifting height approx. 8.0 m Make/conversion AUMUND/TEICHMANN Duodeqcvdpopfx Aa Not Rebuilt/reconstruction 2005/2024 Crane equipped with: - stable double-rail trolley with DEMAG standard electric wire rope hoist - Radio remote control and plug-in emergency control

Year of construction: 1999, condition: refurbished (used), Span approx. 20.0 m Dedpfxsmdrwks Aa Njut Outreaches usable on both sides approx. 5.0 m Lifting height approx. 9.0 m - Two-rail lower chord trolley with reinforced lower chord optionally with double hoists 2 x 5.0 t or single hoist 10.0 t - Radio remote control (cabin control possible)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Dusdpfx Aoud N Hdea Not Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Lifting height approx. 8,0 m Djdpfxeqfc Ege Aa Nout Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared - Radio remote control - Optionally with magnetic traverse or spreader

Year of construction: 1987, condition: refurbished (used), functionality: fully functional, Can be moved independently of rails Load capacity with spreader beam in parallel operation approx. 2 x 15.0 = 30.0 t Track width approx. 9.06 m Clear width within portal approx. 8.0 m Wheelbase approx. 4.65 m Usable hook path approx. 8.0 m Crane equipped with: - Hook traverse with 30 t center hook and 2 outer single hooks of 15 t each - All-wheel steering for optimum maneuverability - 2 hoists separately and jointly controllable 15 t each (individual operation only 10 t each) - Deutz diesel engine and Danfos hydraulic system - Cab control Working speeds: - Hoist full load/partial load max. approx. 8.0/ 15.0 m/min - Trolley travel max. approx. 20.0 m/min - Crane travel max. approx. 80.0 m/min Special price for short-term decision: incl. dismantling free loading ex Berlin Duodjugkvxopfx Aa Not

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm Dujdpfx Aaebh Ubwj Not coil weight: 12,5 t mandrel Ø: 508 mm

Year of construction: 1991, condition: refurbished (used), Track gauge currently approx. 42.5 m Outreache fixed support usable/total approx. 10.0/16.5 m Lifting height approx. 8.0 m Duedsmdrxaepfx Aa Net - Two Demag trolleys that can be moved separately and together monorail trolleys - Radio remote control and emergency control