Thorwesten PBZ-2 machining center

Thorwesten PBZ-2

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Gujdpfx Ajuiy Nyoa Ssa Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 1998, condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Specifications: • Blade diameter: 550mm Gsdotlpl Hjpfx Aa Seua • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm • Max. Clamp opening, feeder: 410mm

Year of construction: 2024, condition: new, Trolley for handling and storing oversize sashes/frames COMALL CARR 900-93/15 Q, new Technical features: - Contact surfaces coated with non-scratch and shock-proof plastic material - Max. height sashes/frames 2500 mm - N° 16 couples of posts Gsdpfsm H Twgex Aa Soua - 15 compartments with working size 93 mm - 4 wheels Ø 125 mm, 2 of them with locking device - Load capacity: 850 Kg

Year of construction: 2024, condition: new, Trolley for carriage of sashes and frame COMALL CARR 600 - 85/9 Q, new Technical specifications: - 9 compartments with working size 84 mm Gedpfxslfargo Aa Seua - Contact surfaces coated with non-scratch and shock-proof plastic material - Rollers for sash carriage - 4 wheels Ø 125 mm, 2 of them with locking device - Support: 560 Kg - Carton packing

Year of construction: 2012, operating hours: 3,496 h, condition: excellent (used), functionality: fully functional, Quadra L1 in excellent condition with extremely low operating hours for sale. Available with enclosure upon request! On-site demonstration with profile possible. Quadra L1 pass-through machining center with premium configuration: - 6 spindles, 360° rotatable to machine profiles at any angle - 7.5 meter bar loading magazine - 600mm saw and notching unit - Profile positioning system - MG Pilot handheld controller - 2 steel front conveyors for scrap removal - Slice software Gedpfx Aaeywpcvs Sjua - CamPlus / Job software Installation, commissioning, and training can also be provided by us! CNC 12-axis machining center, designed for milling, drilling, and cutting operations on aluminum and light alloys. The QUADRA L1 consists of an automatic tool magazine and a pusher feed system for profiles up to 7500 mm, complete with profile clamping gripper. As the collet moves, the feeder returns to its starting position, allowing the loader to prepare the next profile simultaneously. The central section houses the milling and cutting modules. The CNC 4-axis milling module is equipped with 4 to 6 electrospindles, enabling complete contour machining of the workpiece in any orientation. The CNC 3-axis cutting module features a Ø 600 mm blade with a plunging movement. The QUADRA L1 also includes an automatic outfeed system from the cutting unit to the unloading magazine. The system is equipped with a magazine with cross belts for unloading finished workpieces up to 4000 mm (7500 mm optional). The machining unit can be fitted with an optionally available enclosure, providing sound insulation for the central operational area, which not only protects the operator but also reduces noise emissions. Machine demonstration available!

Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Corner centering from the outside of the window Profile programming is based on a graphical interface after entering profile drawings in graphic format Gjdpfxowh R Tks Aa Sjua Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Godpjyn N Apofx Aa Ssua

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, following company liquidation. Gsdpfx Aaoyl Sarj Soua

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Rotox sash assembly table, year of manufacture 2007; automatic screw feeding, adjustable screwdriver height, corner bearing drilling unit, fittings shelf Gusdpfx Aeyr Arxsa Ssa

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Gjdpfx Aaswprmzs Soua Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force