Circular shear

TIMAC TZZ-1604

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. Nedpfx Alexr Utaoholc The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC circular shear with adjustable blades and diameter adjustment system. Automatic double-station stacker with suction-cup arm and interlocked safety doors. Integrated pneumatic and electrical systems with Unidrive inverters and a single control cabinet. Two control panels—one for each machine group—each with a touchscreen, interconnected to ensure communication and coordination between the LARA and TIMAC sections. Table for sheet scrap removal and LARA shear. Main technical data: Maximum strip width: 1,400–1,600 mm (maximum 1,400 mm on straightener) Sheet thickness: up to 3 mm (carbon steel) / 1.5 mm (stainless steel) Blade diameter: 100 mm Installed power: approx. 16–20 kW Electrical supply: 400 V / 50 Hz Working pressure: 6 bar Overall dimensions (approx.): 8.8 m (L) × 6.8 m (W) × 3.3 m (H) (L-shaped configuration, with side loading and stacking zones)

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm Nlsdpfx Aju Iukfjlhjc R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, LVD Shear Nlsdpfx Asx Tqtbjlhoc Type HST C-10/31 Capacity 3000 x 10

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Nedpfjxta E Rox Alholc Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW Nedpfoyxvgqsx Alhslc CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Nedpfoygd Aujx Alhjlc Angle 0.5-2.5 Strokes per minute 3-5. Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: Nodoxacfgopfx Alhelc - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: foot remote control, type plate available, Circular Shears Manufacturer: Prinzing Type: KSE 25/10 Year of Manufacture: 1991 Nsdswmqdgopfx Alholc -used- Thrust: 350 mm For sheet metal up to 2.5 mm Sheet thickness - Cutting gap 1.00 mm - 0.05 mm 1.50 mm - 0.10 mm 2.50 mm - 0.15 mm Includes additional replacement blades as shown. The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale.

Condition: new, plate thickness 2.5 mm throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop Nsdpfx Aloxaaw Hjholc - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 60,90,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. Nedpoyik Hcefx Alhslc -Service manuals and operation books along with the machine