Table type boring machine

TOS Hulín WD 130

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, spindle diameter: 130 mm, overall weight: 32,450 kg, year of last overhaul: 2014, The machine is in very good technical condition, equipped with a Heidenhain iTNC 530 CNC control system. Specifications: Spindle diameter: 130 mm X-axis travel: 3000 mm Y-axis travel: 1800 mm Taper in spindle: ISO 50 Spindle extension: 1120 mm Horizontal spindle head extension: 450 mm Gtsdox Hfk Ispfx Ah Hst Total installed motor power: 50 KVA Dimensions (L x W x H): 10100 x 4380 x 5250 mm Weight: 32,450 kg

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Gjdpfx Ahoiu Acpj Hjtt

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. Gsdpfxouxmt Tj Ah Hott No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production Gtodpfx Ahetuncco Hot *

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Gtsdpfx Ahohlp Iwj Hjt Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is Gtedpofg E Hpofx Ah Het adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, VTL SC 17 CC Vertical Turret Lathe Specification: Faceplate diameter: 1450 mm Swing diameter: 1700 mm Turning height: 1200 mm Gtedpfx Asxdcxush Het Weight of the machine ca.: 22 t

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Gtsdjwwtrbopfx Ah Hst

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Gtjdpjwq Dpqjfx Ah Het Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: excellent (used), Year of construction: 2012, Technical specifications: Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 Gtodpfxjwl U Rho Ah Hot CNC crowning Stroke: 350 mm Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.