Table boring mill

TOS Varnsdorf WH10-CNC/18

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Itjlhcdjyqmvxewxsg Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Itolhjq U Rm Hocdwxeg Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2002, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Itjlhsyqvqrscdwxeg Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Itjljy Hq Dyjhcdwxeg Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Iolhoyf Uqtjcdwxetg Manufacturer: CME, Origin Spain Model: FS Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Weight: approx. 300 kg This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Itslhcdey H Dahewxsg Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100i Control - CE marking - Fanuc MXP 100i control - Prepared for 4th axis - Year of manufacture: 2008 / Only 1 previous owner, very well maintained / Original paintwork - Travel (X / Y / Z): 1270 x 520 x 540 mm Itjljyi A Inohcdwxeg - Rapid traverse (X / Y / Z): 36 m/min / 36 m/min / 24 m/min - Feed rates: approx. 945 IPM (inches per minute) - Distance table surface to spindle nose: 100-645 mm - Worktable: 1350 x 520 mm - Max. table load: 1000 kg - Spindle speeds up to 10,000 rpm - Spindle taper: BT 40 - Spindle motor power: 11.2 kW - Tool changer (ATC): 24 stations / side-mount type - Tool change time: 3.5 s (tool-to-tool) - Electronic handwheel - RS232 interface - Various tool holders - Chip conveyor - Spindle oil cooler - High-pressure pump - Oil skimmer - Work light - Machine bases - Machine documentation Dimensions (L x W x H): 3.5 x 2.4 x 2.2 m / Weight: 7,000 kg Errors and omissions excepted.

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm Itoleyuql Eohcdwxeg taper ISO ISO 50 P.D.B. total power requirement 25 kW

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA (Origin Italy) boring mill. Spindle taper: SK 50 Overhang: 660 mm Flange dimensions: 465 x 440 mm Internal bore: 294 mm Itolhoyc Nhhjcdwxsg Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions (L x W x H): 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Continuously adjustable angle, manual • 4 fixed indexing points at 90° each with locating pins • Tool clamping with drawbar • Suitable for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, swivels left/right, manual tool clamping, ... Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1983, spindle diameter 160 mm x-travel 9500 mm y-travel 4000 mm z-travel 1000 mm w-travel 700 mm spindle speed: 2,5-1000 U/min control Siemens 840 D power capacity 28 kW spindle taper ISO 50 dimension of the ram 340x340 mm Feed 5000 mm/min rapid traverse 5 m/min The machine was completely overhauled in December 2015The tech. Data are Ijlhcdwsy Suiwjxstg manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team