Press brake

TRUMPF TruBend 7036, Year 2018. Top machine. Low Working hours

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Fjdpfsxc H Rfjx Ag Roft Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Main switch, emergency stops Disc brake Electrical specifications: Power: 28.05 kW Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Ffjdou S Ahqjpfx Ag Ret Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm Fjdpfx Aou D I Tleg Reft longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Control Kelco 80 total power requirement kW weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Year of construction: 2025, condition: new, Mobile loading ramps AUSBAU from the manufacturer Standard models with 6, 8, 10 and 12 tons load capacity. We offer loading ramps from the manufacturer in any dimensions you need. They save the loading / unloading time of the truck / wagon. You can move them over the enterprise territory with the help of installed automotive wheels. Mobile loading yard ramps AUSBAU operate in any weather conditions. Warranty: 18 months. World-wide delivery. Finished and made-to-order. CE Standard. Read more about loading ramps on our website. id: ISGhNU Technical characteristics: ● Load of ramp, kg - 6000 / 8000 / 10000 / 12000 ● Total length of the ramp, mm - 9000 / 9500 / 10500 / 11200 / 12000 / 13000 Fjdpfeiqk E Tsx Ag Rjft ● The total width of the ramp, mm - 2130 ● Width of riding surface, mm - 2000 ● Length of sloping part, mm - 8000 / 8500 / 9200 / 9900 ● Loading stage length, mm - 300 ● Min. working height, mm - 900 ● Max. working height, mm - 1550 / 1750 ● Height of the hand railings, mm - 180 ● Number of entry bridges, pcs - 2 ● Number of wheels, pcs - 2 ● Wheels - solid ● Material - S235 ● Riding surface - zinc-coated anti-skid grating ● Components - rubber wheel chocks – 2 pcs, tow pole – 1 pc, set of chains on the ramp – 7 pcs, manual hydraulic pump with handle – 1 pc. Additional options: ● electric hydraulic station on the ramp; ● three-sided unloading mobile ramp. Supplied with safety legs; ● safety legs adjustable in height, installed on ramp; ● tent cover over the ramp; ● additional protective hand railings, 1100 mm height; ● additional pair of wheels: 4 instead of 2; ● choosing a different color (standard color is red). Mobile ramp operating principle: The forklift lifts the edge of the ramp (inserting the fork into the rigid tow pole) and drives it to the truck. Using a hydraulic pump, set the required height of the ramp (from 900 mm to 1750 mm). Ramp complete with wheel chocks and chains. Chocks fix the ramp. Chains securely fasten the mobile loading ramp to the truck. Then the loaded forklift moves up the loading dock ramp and drives directly into the truck or container. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Ffsdpewntqxjfx Ag Ret Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Ffodpfx Agsvun Tpe Rot Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] - Number of turrets : 1 UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] Fsdpfjuha Eljx Ag Rsft EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Ffodpfxon Arm To Ag Rjt Scattered light

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. Fsdpfogvkk Nex Ag Rjft - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: S36-0685, (engraving, cutting) With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 Working area (W x D): 813 x 508 mm CO2 laser power: 80W, 120W Ffedpfjxcalvjx Ag Ret Max. engraving speed: 3.55 m/s Operating mode: Optimized modes, including raster, vector and combined