Laser cutting machine

TRUMPF TruLaser 5060

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 42,130 h, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, Submitting a bid entails an obligation for timely collection by 30.04.2026! Increased pressure to dispose - therefore reduced listing duration and lower minimum price! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Accuracy Minimum incremental movement: 0.001 mm Positional deviation: ± 0.1 mm Positional repeatability: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Pulse frequency: 0.01 - 10 kHz Gases: CO₂ / N₂ / He Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 15 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Dimensions & Weight Dimensions (L x W x H): 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Operating hours Beam-on time: 21,660 h Laser-on time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar EQUIPMENT Cooling unit, logbook function Automatic pallet changer Gantry drive combined with linear direct drives Laser power control HI-LAS high-pressure cutting PMS plasma sensor technology Programmable power cycles Programmable cutting gas pressure regulation Laser cutting head with 5" lens and 7.5" lens Quick-change system for cutting heads Automatic sheet edge detection APC capacitive height and process control PCS (Process Control System) Laser diode positioning Automatic focus adjustment (AutoLas Plus) Spray device for safe thick sheet processing Automatic shut-off Work area lighting Open PC-based control system Online assistance Diagnostic functions Maintenance logbook Cgedpfx Aoyynuioa Njt Technology data Remote maintenance Safety Multi-beam light barriers Fully enclosed beam guidance with nitrogen flushing Monitoring system Multi-chamber extraction and compact dust collector Protective enclosure Machine system software

Condition: good (used), Year of construction: 2012, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Cgsdpfx Aaou U Hm Ae Njt Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Beuting oscillating conveyor table Donaldson DFPRO12 filter unit for outdoor installation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, controller model: Siemens Sinumerik 840D, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 4,800 kg, Trumpf TruLaser with LoadMaster! TECHNICAL DETAILS X-axis: 6,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Workpiece Max. weight: 4,800 kg Maximum Speed Simultaneous: 300 m/min Accuracy Position deviation Pa: 0.05 mm Mean position deviation Ps: 0.03 mm MACHINE DETAILS Control: Siemens Sinumerik 840D Dimensions and Weight Dimensions (L x W x H): 16,950 x 5,550 x 2,550 mm Weight: 16,000 kg Codpfoxc U Ulsx Aa Negt Resonator: 6 kW CO2 Beam operating hours: 25,000 h EQUIPMENT LoadMaster

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,886 h, machine/vehicle number: A0270 A 0120, laser power: 5,000 W, table length: 6,000 mm, table width: 2,000 mm, Submission of a bid obligates the buyer to collect the item by 30.09.2025! TECHNICAL DETAILS Laser power: 5 kW Work table External length: 6,000 mm Cedoxbpagopfx Aa Njgt External width: 2,000 mm MACHINE DETAILS Electrical connection Supply: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V Required fuse: 3 × 160 A Operating hours (as of 30.07.2025) Operating hours “Beam On”: 14,886 h Operating hours “Laser On”: 81,673 h

Condition: used, Year of construction: 2008, Crowning CNC controlled Bending length 4250 mm Cgsdpfxoyvr Ews Aa Not 5-axis backgauge Work area lighting Parking position 900 mm Hydraulic lower tool clamping Hydraulic upper tool clamping CNC lower tool displacement Installation height 615 mm ACB preparation

Condition: new, Year of construction: 2024, functionality: fully functional, Incorrect investment by a corporation. Machine is new and unused (already delivered). Codpfsxizdajx Aa Negt The machine is available immediately with no lead time. An extremely rare opportunity. Machine type: Horizontal machining center with pallet changer Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: fully closed loop scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optional 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: direct drive Minimum index: 0.001° Maximum speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: central spindle cooling Internal coolant: optional CTS 7 MPa Tool magazine: chain-type, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [for >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment / Options: - Workpiece probe - Tool measurement - Laser control (optional) - High-pressure coolant 7 MPa (optional) - Chip conveyor - Fully enclosed enclosure with roof Dimensions n.a. Weight n.a. Connection data n.a.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Cgjdpfsr Nfvmox Aa Njt Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1978, condition: excellent (used), Technical details : Csdpfx Aaolf Iqne Nogt -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,454 h, • Pressing force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tooling (Option: increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: increased installation height): 430 mm (580 mm) • Max. distance between lower edge of press beam and upper edge of machine table (Option: increased installation height): 470 mm (620 mm) • Press beam tilting: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Cedpfxsyfxdws Aa Negt Speeds • Y-axis rapid traverse²: 200 mm/s • Max. Y-axis working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Travel paths, backgauge zone • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • Max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard scope: T3500T Multi-Touch control Connection data • Connected load (IEC) approx.: 20 kVA Dimensions and weights • Required floor space (length x width): 3607 x 1644 mm • Height (Option: increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Structural body: White = NCS S 0505 R80B • Blue = approx. RAL Design 250 20 20 • Black = RAL 9005; Silver elements with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending – Maximum Y-axis rapid traverse speed is not limited in pure foot-operated mode – Tool height can be set easily and quickly with a rack solution and weight compensation – BendGuard can be easily slid back for lateral tooling processes without reinstallation – BendGuard is insensitive to shocks (disassembly), as the unit electronics are not connected Table supports (2 pieces): – Table supports are manually adjustable in Z- and R-directions and can be fixed with quick-clamp – Facilitate handling of large and heavy workpieces and can serve as storage surface for finished parts – Load capacity: 70 kg per support LED work area illumination front and rear: – Excellent illumination inside and in front of the machine’s working area – Modern LED technology: energy-efficient, cool-running, and very long-lasting DXF import: – Import DXF drawings into the 2D control system.

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW – Year of manufacture: 2017 – Laser source: IPG – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m Cgodpfx Aasvyhcze Njt – CAD software – Nesting software – Pipe laser software – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.