Laser Pipe Cutting Machine

Trumpf Trulaser Tube 5000

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Hjdpfxszrt Uis Achjnr Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Hnjdjfxpbmjpfx Achjr

Condition: ready for operation (used), Year of construction: 2015, operating hours: 67,121 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,200 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 170 mm, overall weight: 17,000 kg, total height: 2,800 mm, product length (max.): 16,000 mm, number of axes: 5, Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. • Working range A1 axis (pulling chuck): n x 360° • Working range A2 axis (feed station): n x 360° • Workpiece max. length of raw material: 6500 mm • Workpiece min. length of raw material: 3000 mm • Workpiece min./max. outer diameter (circular): 20–152 mm • Workpiece min./max. side length (rectangular, at max. circumscribed circle 170 mm): 20–150 mm • Workpiece max. length of finished part: 3000 mm • Workpiece min. length of tube remnant: 120 mm • Workpiece max. scrap length: 400 mm • Bundle dimensions max. cross-section: 600 x 750 mm • Bundle dimensions max. weight: 4000 kg • Material weights max. workpiece weight: 130 kg (loading 6.5 m) • Material weights max. workpiece weight per meter: 20 kg/m • Speeds X axis (+): 170 m/min • Speeds X axis (-): 100 m/min • Speeds Y axis: 60 m/min • Speeds Z axis: 60 m/min • Speeds A axis: 780 °/s • Positioning accuracy, position deviation Pa: ±0.2 mm / ±0.015° Hnedpfx Acezlq I Hohor • Positioning accuracy, mean position dispersion Ps: ±0.06 mm / ±0.005° • Smallest programmable path length: ±0.01 mm / ±0.001° • Lens cutting head focal length: 155 mm • Depth 7000 mm; Length 16000 mm (loading 6.5 m, unloading 3 m) • Laser on hours: 15786 Additional equipment • Option to reduce minimum circular tube outer diameter to 15 mm (from 20 mm) • Option to reduce minimum rectangular tube side length to 15 mm (from 20 mm) • Option to increase max finished part length to 6500 mm (from 3000 mm) • Option “Length of finished parts +1.5 m”: adds 1500 mm to finished part length • Optional 8.0 m loading system: increases max workpiece weight to 160 kg (from 130 kg)

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Hnjdozlr Rpopfx Acher Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Hsdpfofi Tg Hjx Achjnr Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 3,000 h, degree of automation: automatic, laser source manufacturer: TRUMPF, laser hours: 1,860 h, laser power: 3,000 W, TruLaser Tube 5000 fiber Laserpower: 3000W Year of manufacture: 04/2022 Machine on: 3100 h Laser on: 1860 h (!) Machine:  Feed station with self-centering clamping jaws  Tube support (raw material) with automatically retractable tube supports  Feed-through chuck with self-centering tensioning rollers  Adaptive clamping system for the feed-through chuck  Work area illumination  Tube support (finished part) with extendable guide rollers  Finished part deposit (contains one conveyor table and conveyor table extension)  High-precision drives TRUMPF laser  Excitation using pump diodes  Laser power control  Laser log function  Closed beam guidance via laser light cable (LLK) Cutting head  Lens cutting head with 150 mm focal length  Magnetic coupling Control  TRUMPF control system based on Sinumerik 840D SL  Integrated technology data  Auto switch on and shutdown  Programmable cutting gas pressure  Remote support interface  Pivoting control panel with 19” touch screen  Condition Guide Functions  AdjustLine  ControlLine  FocusLine  NitroLine  PierceLine Hnodpfx Aozh H Axochsr Data transmission  USB interface  RJ45 network interface  Central Link  Online Update Manager Accessories  Clamping jaw pair up to D 152 mm  Guide rollers, round/rectangular tubes  Ceramic part (one piece)  Cutting nozzles start-up set Safety  CE marking and EC Machinery Directive  Protective cabin with laser protective screens  Monitoring system for gas pressure, temperature and cooling water  One and two-beam safety light barriers Advanced standard configuration  Machine bed for 6.5 m raw material length  LoadMaster Tube for 6.5 m raw material length (including bundle space)  Part-removal station for 3 m finished part length (including scrap conveyor belt with container)  Compact dust extractor  Laser process cooler (water-air) Bevel cut technology package  Bevel cutting up to maximum 45°  Contains electrically movable feed-through chuck  Application-specific restrictions may arise depending on the respective material properties or the desired machining process Front LoadMaster Tube installation +1,5m unloading (max 4,5m)

Year of construction: 2008, condition: good (used), Example advertisement! Machine is not for sale. Operating hours: 27,301 h (laser on) | 10,406 h (beam on) Weight: approx. 17,700 kg Dimensions: 18,000 x 9,000 x 2,800 mm (length x width x height) Permissible dimensions of workpieces: Max. material thickness, structural steel: 8.0 mm Max. material thickness, stainless steel: 5.0 mm Max. material thickness, aluminum: 4.0 mm Max. finished part length: 3,000 mm + option for extending the unloading table by 1,000 mm Hnsdpfx Acshmu R Djhor

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Hnsdpox Dip Tjfx Achor Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine Hnedpfx Aeygu Tkjchjr - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Hnjdpjxxa Ucjfx Achsr