Trumpf Laser and Punching Machine TruMatic TC 6000 L 1300

Trumpf Laser- und Stanzmaschine TruMatic TC 6000 L 1300

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Iodpfx Ajydpxvegysih Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Iijdpfx Ajx Hn D Rogyeh Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 4, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm Iijdpfx Aex D I H Dogyoh • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Iedpfxsza E S De Agyjih

Condition: good (used), Year of construction: 1998, pressing force: 150 t, stroke length: 215 mm, working length: 3,100 mm, Completely rebuilt machine. New Cnc: Step Automation Rock 15 (Touch Screen and 2D) Bending length: 3100mm Iisdpouc Txzefx Agyoh Force: 150tn 6 axes (Y1, Y1, X, R, Z1, Z2) Travel/Travel: 215mm Delivered with complete set of 3 meters of punches and dies. *Machine in the process of retrofitting, new cnc to be installed.

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm Iijdpfswwt Nmox Agyeh NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons 121026

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Ijdpfeh Tnpxjx Agyjih

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: Iodpfx Aszlqw Ijgyeih 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Machine will be in stock in 2 weeks

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Iodpfowzyp Ujx Agysih Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: not inspected (used), Year of construction: 2013, Profile machining center Axis travels X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Isdpfx Agjvy E Ibeysih Automatic tool magazine with 8 positions in a protected housing, for drilling, milling, and threading tools, angular heads, and disc milling cutters, max. Ø 200 mm, + 2 positions for 2 angular heads Tool holder: ISO 30 In pendulum operation (2-zone machining), the working stroke per zone is limited to 3500 mm. Special price due to the fact that it has not been inspected!