Twin Monkeys Cimarron Atmospheric filler (2021)

Twin Monkeys Atmosphärischer Füller

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m Dedpfx Aou Idbyoptjkt space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Dkjdpfx Apsw Rpd Sotet Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Djdszl S Uzepfx Aptskt Chip conveyor Various tools Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Djdpfoylypujx Aptokt Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers Dkedpfxoxnb Iij Aptet - Spare parts - Control cabinet - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Dsdpswtg Insfx Aptjkt S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Dkedpfx Apjyhbt Hotet Conveyor...

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Dodex Sx Htspfx Aptokt DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Dksdjt Akgwepfx Aptet Year of construction : 2000

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm Dkodpfx Asy U Naijptjt (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland