Mandrel bending machine

unbekannt 1200/740/H1220 mm

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: Ledpfxjd S Uf Se Ackshg up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: good (used), Year of construction: 2002, Beringer BPx4 ergo Useful volume 6cbm tested, serviced, fully functional Lhjdpfetp Hnwex Ackjg Can be painted in the desired RAL color. Noes3koku We would be happy to make you an offer including delivery.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, Lodpshpktvofx Ackohg - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Model Name Lhsdpfx Aegvquwocksg Shark 332-1 CCS

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Lhedofifg Hspfx Acksg Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen Lhodpfxetr U Hlo Acksg → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, pressure 160 t Lhodpfx Acsiulkqoksg passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material Ledpeh D Svnefx Ackjhg 1x for? - footswitch

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 Lhedpfxoudi Une Ackjg 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Ljdpfx Ajd Hintockehg Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300