43 pieces of turning tool holders

unbekannt verschiedene Ausführungen Prisma 110/94 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 197 mm, Upon request, videos of the machine in operation can also be provided. Maximum turning length: 6000 mm Turning diameter: over cross slide: 1000 mm over bed: 1250 mm Nledpfx Abjyr N N Re Usg Spindle bore: 197 mm Spindle speeds: 0 – 665 rpm Faceplate diameter: 1200 mm Workpiece weight: 15000 kg between centers Motor power: 55 kW / 74 hp 3 gear stages: 1.5-55 / 50-180 / 180-665 rpm Accessories: Sauter 4-position tool turret (rotation defective) Tailstock (hydraulics partially defective, pressure loss) Chip conveyor 2 chip guard doors (incl. safety device) 4-way bed machine (flat bed) LED lighting

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Njdsyuchrepfx Ab Uolg Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2021, condition: good (used), functionality: fully functional, 676.13 kWp industrial photovoltaic solar plant (2021) The installation was completed in 2021 with an original peak power of 676.13 kWp. It consists of monocrystalline PERC photovoltaic modules installed on ballasted aluminum structures, without roof perforation, and with an approximate inclination of 10°. Energy conversion is performed using 5 Huawei SUN2000-100KTL-M1 three-phase inverters, with a combined nominal power of approximately 500 kW AC and an output voltage of 400 V three-phase. The inverters incorporate MPPT trackers, string monitoring, PLC/Modbus communications, and integrated protection in direct and alternating current. The plant has an ITRON meter responsible for zero-injection control, configured for administrative reasons to prevent excess power from being injected into the grid. It also includes electrical panels, protection devices, conduits, solar cabling, and measurement and control systems. Main features • Installation year: 2021 • Original peak power: 676.13 kWp Nsdpfsznbq Djx Ab Uolg • Power of disconnected strings: 110.14 kWp • Current peak power: 565.99 kWp • Inverters: 5 Huawei SUN2000-100KTL-M1 • Combined nominal power of inverters: approx. 500 kW AC • Output voltage: 400 V three-phase • Module technology: monocrystalline PERC • Ballasted aluminum structure on the roof • Zero-injection meter: ITRON • Monitoring, measurement, and protection system • Location: El Prat de Llobregat, Barcelona, Spain • Available for inspection and dismantling study

Condition: new, Bernardo Universal Lathe Compact 400 V Technical Specifications Center distance 850 mm Center height 200 mm Swinging diameter over bed 400 mm Swinging diameter over cross slide 245 mm Bed width 260 mm Spindle bore 52 mm Spindle mount DIN 55029, D1-5 Speed range, 2 steps 50 - 450 / 450 - 2500 rpm Range of longitudinal feeds (20) 0.025 - 2 mm/rev Range of cross feeds (20) 0.012 - 1 mm/rev Metric threads (26) 0.2 - 14 mm Inch threads (42) 1 - 80 TPI Tailstock diameter 50 mm Tailstock travel 120 mm Nljdpfxed Ertrj Ab Ueg Tailstock mount MK 3 Motor power 5.5 kW (7.5 hp) Machine dimensions (W x D x H) 1900 x 1000 x 1610 mm Weight approx. 1185 kg Features Standard equipped with a Delta frequency inverter for high torque in the lower speed range and nearly constant speed under load Infinitely variable speed control; the set speed is displayed on a digital display To minimize the effects of vibrations, the massive prism bed is additionally equipped with ribs Versatile applications in general mechanical engineering, production, and the manufacture of individual parts Modern main spindle bearing with angular ball bearings in a precision design The machine bed, cast in one piece, is extremely torsion-resistant and has low vibration, thus fulfilling an essential prerequisite for precise turning Space-saving installation possible thanks to a chip tray that can be pulled out to the front Standard equipped with a 52 mm spindle bore for machining large shaft diameters Scope of supply • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck PO3-200 mm / D5 • Faceplate 320 mm • Fixed steady rest - bore diam. max. 130 mm • Traveling steady rest - bore diam. max. 100 mm • Coolant system • Quick-change tool holder with 4 inserts • Safety device for quick-change tool holder • Micrometer length stop • Friction clutch • Motor with magnetic brake according to CE standard • Initial filling with Shell Tellus 46 • Frequency inverter • Digital speed display • Pull-out chip tray • LED machine light • Change gears • Reduction sleeve • 2 centers • Chip guard • Operating tools

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available Nedpfx Aji I Hc Ajb Uolg -Price: per piece -Front dimension: Ø 46 mm

Condition: good (used), Year of construction: 1983, Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table -Model: AWH 355 -can be opened on one side -without hydraulic unit -with hydraulic valves -without control -controlled via cam switches -supported by clamping brackets for heavy machining -Clamping surface: Ø 350 mm -Peak height: 350 mm -braked: hydraulically -driven: hydraulically -Hydraulic motor speed: 10-1500 rpm Nljdpsb A Nn Tefx Ab Usg -Swallowing volume: 20 cm³/rev -Dimensions: 680/360/H620 mm -Empty weight: 290 kg

Condition: good (used), Quick-change tool holder, tool holder head, quick-change tool holder -Receiver dimensions: 90 mm -5x: various types of steel holders available (pictures on request) Price: per piece -Length: 125 mm -Weight: 2.5 kg Nlsdpfx Ajb A R T Eeb Usg

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor Nsdjzaix Ispfx Ab Ujlg

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 98 mm -Tip height: 180 mm -Edition: steel -technical drawing with the photos -Dimensions: 410/330/H85 mm -Weight: 10 kg Njdpfsb A Tdnox Ab Uolg

Condition: good (used), Bezel, setting stick, lynette -Intermediate plate for: bezel Nedpsdpyzzjfx Ab Uolg -Prism size: 33/38 mm -Height: 71 mm -Drawings: with the photos -Dimensions: 345/175/H71 mm -Weight: 32 kg