Universal Machining Centre

Unisign UNIPORT 6000

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Lsdjx S Rx Ispfx Adwjhb Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Lhjdpfxsk R T Nmo Adwjb

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000 portal milling machine, year of manufacture 2005, Siemens 840 D control, travel range X/Y/Z 3000/3000/1000 mm, C axis for turning operations, table Ø 2500 x 2000 mm, max. turning diameter Ø 3000 x 2500 mm, max. turning height 1000 mm, Lhedpfx Adjxqmduoweb angle head for lateral machining, 2.5° Hirth coupling, spindle speed up to 6,000 rpm, spindle power 36 kW, taper HSK 100, tool changer with 30 positions, 3D measuring probe, chip conveyor, faceplate Ø 2000 mm, max. faceplate load 10,000 kg, machine weight 45,000 kg,

Condition: used, Year of construction: 2007, BAZ Unisign Type: Uniport 6000, Year of manufacture 2005 and 200. Machining centers with Ø2 and Ø2.5 meters. Uniport 6000/05 as well as 6000/08. The machines can be inspected on site. Lhodjw D Sprjpfx Adweb

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Lodstximvepfx Adwshb Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement Lhsdpfx Adjvvh R Dsweb The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning Lhedpfxovvh T So Adwsb New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3 Ljdpeu Hl R Tjfx Adwjhb

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with support ribs and table extension on both sides -Clamping area: total 6000 x 2600 mm -Height: 295 mm -Table extension: 300 mm on both sides -Groove width: 30 mm -Groove spacing: 500 mm -Transport dimensions: widening dismantled on one side 6000/2300/H590 mm Lhodpfondzx Ujx Adweb -Weight: 10000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, color: white, total length: 1,600 mm, total width: 1,250 mm, total height: 2,000 mm, The EnergyCore EC-50&100 energy storage (50 kW, 100 kWh) is an all-in-one solution ideal for industry, RES farms and data centers. It offers high efficiency, safety and reliable energy management with an advanced Production plants Thanks to its ability to respond quickly to fluctuations in energy demand, production plants can avoid costly downtime. It increases power reliability and enables more efficient use of renewable energy. Industrial companies The EnergyCore EC-50&100 energy storage supports power supply stability in large industrial plants, reduces energy costs during peak periods and increases operational efficiency. Ideal for managing excess energy and supporting production processes. Data centers Provides reliable power supply during power outages, which is critical for the continuity of data center operations. The energy storage acts as a support for the UPS, providing additional protection against failures and power stability under high loads. Photovoltaic and wind power systems The EnergyCore EC-50&100 enables the efficient storage of excess energy generated by renewable sources such as photovoltaic and wind power systems. It maximizes self-consumption, minimizes energy losses and promotes sustainable resource management. INNOVATIVE APPROACH Mobile app for Proton energy storage Modern Proton energy storage - maximum efficiency and long service life Energy storage from Proton is based on the innovative LiFePO4 technology, which enables high current efficiency and an extremely long service life with several thousand charge and discharge cycles. LiFePO4 batteries have a high energy density, so that large amounts of energy can be stored in the smallest of spaces. In addition, these cells have a low self-discharge rate and are immune to the "memory effect" that occurs with older battery types such as Ni-Cd, Ni-MH or AGM We have been in business since 2007 (over 17 years) Lhedpfovtg Euox Adwsb Under what conditions can our energy storage units be operated? Single-family homes Restaurants Hotels Office spaces Farms Server rooms Public facilities Production facilities Universities and technical colleges Anywhere where constant access to electricity is required - The customer service office is available on weekdays from 8 a.m. to 4 p.m. - The service department is available 24 hours a day (24/5) for our customers. If you have any questions or problems that require a quick response, the best way to contact us is by phone.