Gantry milling machine

Unisign Uniport 6000

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Dedpfsy A Ifmsx Ap Dewc Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Dedpfx Ajy Rxtkop Dswc Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: used, Year of construction: 2009, faceplate diameter 3000 mm swing diameter 3500 mm turning height 3200 mm Control Fanuc type Series 320i Model A slide adjustment 1750 mm ram head dimension 300x300 mm x-axis 2700 mm Table load 30000 kg main drive motor 100 kW Tool changer 16 weight of the machine ca. 89 t dimensions of the machine ca. 8,5x6x8 m No. 1104 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dsdpfx Apeyqu Rws Djwc If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,71,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Dwodpfoyz S T Sox Ap Djc

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° Dwjdpszf Nn Ssfx Ap Dsc c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor Dwedpjthuzpjfx Ap Doc - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Dwjdpsy Dqb Tofx Ap Dec Machine weight: 6,700 kg

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t Dwsdpfx Apsy Amllj Dec dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: good (used), Year of construction: 2005, functionality: fully functional, Maho DMU 50, Year of manufacture 2005, Control system Siemens 840 D Powerline Shop Mill, Travel range X/Y/Z 500/450/400 mm, 2-axis NC swivel/rotary table Ø 630 x 500 mm, Max. table load 200 kg, Swivel range -5° / +110°, Digital drives, Spindle speed up to 10,000 rpm, SK 40, Direct linear scales X/Y/Z, 30-fold coolant, Additional cabinet door on the right, Operating mode 4, Infrared measuring probe Heidenhain TS 641, Dwsdpszxm Dwsfx Ap Dec Electric handwheel, MDE interface, Additional V24 interface on the control cabinet, Previous application: production of samples and prototypes.

Condition: excellent (used), Year of construction: 2018, operating hours: 6,185 h, functionality: fully functional, Tsugami B0326E-II Long-Turn Lathe Manufacturer: Tsugami Model: B0326E-II Year of manufacture: 2018 Control: Fanuc 32i-B Technical data Max. bar diameter: 32 mm Max. machining length: 320 mm (with guide bush) Machining without guide bush: 70 mm Main spindle: 8,000 rpm Counter spindle: 8,000 rpm Tool spindles: 6,000 rpm Number of controlled axes: 6 Tool stations: 31 standard (optional up to over 40, depending on configuration) Driven tools Y-axis C-axis, main and counter spindle Rapid traverse up to 32 m/min Main spindle motor: 3.7 / 5.5 kW Counter spindle motor: 2.2 / 3.7 kW Connection power: 21.4 kVA Machine weight: approx. 3,500 kg Dimensions (L × W × H): 2,150 × 1,280 × 1,930 mm Equipment ✔ Fanuc 32i-B CNC control ✔ Counter spindle ✔ Y-axis ✔ C-axes ✔ Tool package ✔ Top Infinity bar feeder magazine ✔ Kraft & Bauer fire extinguishing system ✔ Coolant system ✔ Chip conveyor Very well-equipped Tsugami B0326E-II long-turn lathe from 2018 with Fanuc 32i-B control. The machine features a main and counter spindle, Y-axis, and driven tools, making it ideal for high-precision series production of complex turned parts up to Ø 32 mm. The scope of supply includes an extensive tool package, a chip conveyor, a Top Infinity bar feeder magazine, and a Kraft & Bauer fire extinguishing system. The machine is in good condition and is available for immediate delivery after consultation. Dodpfx Aszlp Swop Dewc