Single shaft shredder
Vecoplan VAZ 120/105-U

Name: Vecoplan VAZ 120/105-U
Brand: Vecoplan
Availability: InStock

Year of construction

1991

Condition

Used

Location

Vievis

Single shaft shredder Vecoplan VAZ 120/105-U

Machine data

Machine type:: Single shaft shredder

Manufacturer:: Vecoplan

Model:: VAZ 120/105-U

Year of construction:: 1991

Condition:: used

Price & Location

Location:: Statybininkų g. 1B, Vievis, 21389 Vievis, Lietuva

Call

Details about the offer

Listing ID:: A16489431

Update:: 06.03.2026

Description

VECOPLAN VAZ 120/105-U Waste Shredder / Crusher

For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been completely overhauled and technically upgraded in 2025 and is fully operational and ready for use.

The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring.

The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically.

If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to the start position. This significantly improves operating efficiency and reduces unnecessary wear on machine components.

If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear.

The PLC system also allows adjustment of key operating parameters depending on the material being shredded, including maximum working power, shutdown power threshold, and the forward movement speed of the hydraulic press. This makes it possible to optimize the machine for different materials and ensures efficient and safe operation.

Rjdpfot Dh T Dsx Aguecb
Technical Specifications:

• Machine type: VECOPLAN VAZ 120/105-U Waste Shredder
• Application: shredding particleboard and solid wood, plastic, paper and similar waste
• Drive power: 18.5 kW

• Throughput:
up to 1000 kg/h for particleboard waste
• Screen diameter: 25 mm
• Rotor:
Ø 235 mm (circle), width 1070 mm, 120 rpm
• Motor:
Rated power: 18.5 kW
Rated current: 36.5 A
Speed: 1455 rpm
Voltage: 400 V / 50 Hz
Protection class: IP54, Type B3

• Drive system:
V-belt drive with hydrodynamic turbo coupling (soft start, overload protection)

• Hydraulic unit:
Drive power: 1.0 / 1.4 kW
Maximum pressure: up to 180 bar

• Feed opening: 1200 × 1050 mm

• Extraction nozzle: minimum air velocity 28 m/s

Dimensions & Weight:
• Weight: approx. 2300 kg

Condition: fully operational after maintenance.

Seller

Registered since: 2024

5 listings online

Call

Send inquiry

Telephone & Fax

+370 528 ... show

These listings may also fit your interest.

Listing

Grebenau

6,826 km

Motorized wire decoiler
WAFIOSAHP 2

Call

Listing

Slat conveyor feed hopper Leitner Aufgabebunker

Hessisch Oldendorf

6,847 km

Slat conveyor feed hopper
LeitnerAufgabebunker

Call

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Rcsdpfxowk E Eme Agueb Length: approx. 7,400 mm Width: approx. 5,200 mm Bonfigioli gearbox: Type SK 185 Siemens electric motor: 346 to 524 volts, 160 watts

See details

Listing

WEIMA WLK15 90KW rotor 1500mm WEIMA WEIMA WLK15 90KW

Częstochowa

6,147 km

WEIMA WLK15 90KW rotor 1500mm
WEIMAWEIMA WLK15 90KW

Call

Listing

Soil treatment plant Unbekannt Herstellung von Erdenprodukten

Oberleichtersbach

6,801 km

Soil treatment plant
UnbekanntHerstellung von Erdenprodukten

Call

Listing

Germany

6,760 km

Single-Shaft Shredder
GrossGAZ 62

Call

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Rcjdpfx Aou Nlkxogujb

See details

Listing

Petrovče

6,380 km

Wood shredder
RobustSD 900 XL/30 kW

Call

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm Rcodpfx Aeiq U Ayoguob ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg 2 years warranty or 2000 working hours

See details

Listing

WEBER NE5 with 2 Co-Extr. WEBER ZE30 WEBER NE5 - ZE 30-ZE 30

Bockhorn

6,938 km

WEBER NE5 with 2 Co-Extr. WEBER ZE30
WEBERNE5 - ZE 30-ZE 30

Call

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D Rjdpfohy Tp Dex Aguecb with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

See details

Listing

Eddy Current Separator Steinert NES 100 220 E 5009

Soerendonk

7,099 km

Eddy Current Separator
SteinertNES 100 220 E 5009

Call

Listing

Pre-shredder LINDNER Recyclingtech GmbH JUPITER 2200

Grafenwöhr

6,643 km

Pre-shredder
LINDNER Recyclingtech GmbHJUPITER 2200

Call

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rjdpew Tk E Aofx Aguecb Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

See details

Listing

MASSIVE PRESS FOR GLUING WOOD GLULAM Hydraulic Glulam Press Modular, Custom Length, New 2025

Slovenia

6,456 km

MASSIVE PRESS FOR GLUING WOOD GLULAM
Hydraulic Glulam PressModular, Custom Length, New 2025

Call

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Rcodou Axfcjpfx Agujb Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

See details

Advertise here