Knives for shredders and granulators

weima wl,wlk

Condition: new, Year of construction: 2025, We offer industrial knives for shredders from brands such as Weima, Vecoplan, Lindner, Untha, and 3E Machinery. We also supply knives for granulators from brands like Zerma, Weima, Tria, Herbold, and Rapid. Our range includes both rotor knives and stationary knives. A large selection of knives is available from stock. We also manufacture custom knives based on provided documentation (technical drawings). Fast turnaround times and top-quality workmanship. Feel free to contact us! Nwsdpfswybrzjx Afqop

Condition: reconditioned (used), Year of construction: 2013, Press container with 20 cubic meters of usable volume for roll-off tipper Aventek RM20 Built in 2013 Several available Repaired, inspected, and serviced Large filling opening Split lid opens left/right Double-sided loading Side-hinged discharge door Ramp operation possible Nwsdpjwifivsfx Afqep These machines are offered repaired, inspected, serviced, and repainted in the desired standard RAL color. We would be happy to provide a quote including delivery.

Condition: new, Year of construction: 2025, We offer industrial knives for shredders from brands such as Weima, Vecoplan, Lindner, Untha, and 3E Machinery. We also supply knives for granulator brands like Zerma, Weima, Tria, Herbold, and Rapid. Our range includes both rotor knives and fixed knives. A wide variety of knives are available in stock. Nwjdpfx Aswybqwjfqep We also manufacture custom knives based on provided documentation (technical drawings). Fast turnaround times and top-quality workmanship. Feel free to contact us!

Condition: new, Year of construction: 2025, We offer industrial knives for shredders from brands such as Weima, Vecoplan, Lindner, Untha, and 3E Machinery. We also supply knives for granulators from brands like Zerma, Weima, Tria, Herbold, and Rapid. Our range includes both rotor knives and stationary knives. A large selection of knives is available from stock. We also manufacture custom knives based on provided documentation (technical drawings). Fast turnaround times and top-quality workmanship. Feel free to contact us! Nedpfx Aewybpmsfqowp

Condition: used, Year of construction: 2024, operating hours: 365 h, machine/vehicle number: 36374, fuel type: diesel, Empty weight: 3.425 kg Lifting capacity: 250 kg Working height: 2.700 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1700 m Nwsdpsvf T U Tefx Afqep Transport dimensions (LxWxH): 7.69x2.2x2.98 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, Towing device with Bolze standard tires 23x8.50-12 AS, ET 60 / mounting frame yard loader WS type SWH hydr. light material bucket Mini, angular 0.90 m, / 315 l with overhead guard Kubota diesel engine D902 16.2 KW = 22 HP First / Edition equipment Nwsdpfsrxr N Ujx Afqjp

Condition: good (used), Year of construction: 2014, Hurco VMX 84 T, Year of manufacture 2014, WinMax control, X/Y/Z travel 2135/860/760 mm, 40-station tool changer, SK 40 tool holder, Spindle speed up to 18,000 rpm, High-pressure internal coolant system, Simulation graphics, Electronic handwheel, Pocket milling with islands, DXF software, 3D infrared probe Nwjdpov S Twuofx Afqsp

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Nwsdpfxet Dmmvs Afqep Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Nodpjvmz N Uofx Afqjwp Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Nwjdjqnufvspfx Afqep Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Camam, Comec, OMEF, Brusa di Garboli