Workshop-overhauled single-column eccentric press, eccentric stamping press
WEINGARTEN AV 40

Name: WEINGARTEN AV 40
Brand: WEINGARTEN
Price: 26000 EUR
Availability: InStock

Fixed price plus VAT

€26,000

Condition

Used

Location

Hessisch Lichtenau Germany

Workshop-overhauled single-column eccentric press, eccentric stamping press WEINGARTEN AV 40

Show map

Machine data

Machine type:: Workshop-overhauled single-column eccentric press, eccentric stamping press

Manufacturer:: WEINGARTEN

Model:: AV 40

Condition:: used

Price & Location

Fixed price plus VAT

€26,000

Location:: 37235 Hessisch Lichtenau

Call

Details about the offer

Listing ID:: A20226490

Reference number:: 61873

Update:: 07.10.2025

Description

Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40
Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003
Pressing force: 40 tons
Throat depth: 225 mm
Table opening: Ø 200 mm with support rim Ø 225 mm
Table dimensions: 560 x 470 mm
Ram area: 260 x 200 mm
Adjustable ram stroke: 8–88 mm
Ram adjustment: 63 mm
Max. install height: 500 mm
Clamping shank bore: Ø 40 mm
Strokes per minute: 40–120
Motor power: 4 kW
Power supply: 400 Volt, 50 Hz
Table height above floor: 700–950 mm
- Table height adjustment with 2 support spindles
- Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm
- Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection
- Stroke release via electric footswitch or two-hand control console
- Front crankshaft support bearing
- Overload protection via shear plate
- Manual central lubrication
- Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine
- Safety standard (UVV) for manual loading/unloading
The machine is equipped with the following operating modes:
- Setup
- Single stroke (two-hand)
- Single stroke (foot)
- Continuous run (foot)
Kjdexlkq Iopfx Acwsdw
- Automatic continuous run
- External engagement
Required space (L x W x H): 1900 x 950 x 2600 mm
Weight: 3.1 tons
Very good condition

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2013

596 listings online

Call

Send inquiry

Message*

Name*

E-mail*

Telephone

Company name

Zip code & cityCountry

I am a dealer

Receive offers for similar machines

Note: Your inquiry will be forwarded to all sellers in this machine category. This allows you to receive a large number of offers.

Privacy statement

Telephone & Fax

+49 5602 ... show

Fax:

These listings may also fit your interest.

Listing

Eccentric Press - Single Column SCHULER PDr C63-315

Plettenberg

6,938 km

Eccentric Press - Single Column
SCHULERPDr C63-315

Call

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm Kdedpfslp U D Tjx Acwjw total power requirement 7,5 kW weight of the machine ca. 5 t

See details

Listing

Germany

6,760 km

Knuckle-Joint Press
GräbenerGKMP 360

Call

Listing

Universal machining center Deckel Maho DMU 50 T Heidenhain Mill Plus

Fuldatal

6,824 km

Universal machining center
Deckel MahoDMU 50 T Heidenhain Mill Plus

Call

Condition: used, Year of construction: 2001, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, nominal power (apparent): 17 kVA, torque: 82 Nm, controller manufacturer: Heidenhain, controller model: Mill Plus, total height: 2,450 mm, total length: 4,000 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,500 kg, We are offering here a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Kjdow Dfbhspfx Acwedw

See details

Listing

Chamfering machine manually NEW J&S engineering STC250M

Lüdenscheid

6,953 km

Chamfering machine manually
NEW J&S engineeringSTC250M

€14,900

Fixed price plus VAT

Call

Condition: new, Manual chamfering machine Development and production in England - Variable adjustment of spindle speed - Max. bar diameter 80 mm - Adjustable bar support - max. chamfering/turning length 37 mm - Precision three-jaw chuck Kedpfx Aobwfh Ujcwodw - Large chip collection container for easy cleaning - easy to move with pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.870,-

See details

Listing

Eccentric Press - Single Column HELMERDING ERVL 50 B

Schmölln

6,625 km

Eccentric Press - Single Column
HELMERDINGERVL 50 B

Call

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping Kodpfetrhf Ajx Acwsdw - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

See details

Listing

Eccentric press EBU Weingarten 15 / 25 / 35 / A 40

Reichenbach am Heuberg

6,866 km

Eccentric press
EBU Weingarten15 / 25 / 35 / A 40

Call

Listing

Eccentric Press - Single Column BEUTLER NOVA C 630 kN

Eislingen/Fils

6,803 km

Eccentric Press - Single Column
BEUTLERNOVA C 630 kN

Call

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm Kdsdpswc U Inefx Acwjw ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

See details

Listing

Lüdenscheid

6,953 km

Band saw
KASTOssb A-2CC

€9,500

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: Ksdpfxou R I A Hj Acwedw using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

See details

Listing

Eislingen/Fils

6,803 km

Eccentric Press - Single Column
BEUTLERNOVA C 630 kN

Call

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t Ksdpsvzxttefx Acwsdw dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation

See details

Listing

Erfurt

6,713 km

Eccentric press
PMEPE 80 C

Call

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Kedpfxsw Ec A Es Acwjdw Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches - Centering groove - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

See details

Advertise here