Welding Table

WMT 2900x1400nitri

Condition: new, plate thickness 0,8 mm throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: Podpfxsht R Hms Adkogp - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: good (used), Year of construction: 2007, machine/vehicle number: 05542, Offer 25128 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 68 kVA - Reach adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding values: sheet steel approx. 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water quantity: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg Pgodpfewn Emljx Adkjp - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling device

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m. Pgedstp Dhpepfx Adkep  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Pgodovu Hccjpfx Adkep Fresh/waste water tank volume: 50/ 50 L

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping Podpfong Amkjx Adkjgp - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, turning length 500 mm turning diameter over bed 297 mm Podpfx Adexaciroksgp turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Pgjdov Dvllepfx Adksp Fronius TPSi 500 Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Pgodpjh I Nqwefx Adkep Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Pgedpfx Adod Ehh Rokjp Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm Pedpfxju Dbvte Adksgp 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m