Surface planer

WYRÓWNIARKA MARTIN T54

Condition: good (used), Year of construction: 2002, Robust T 26 Tilting Spindle Moulder, tiltable from -45 to +45 degrees, with 2-axis Duocontrol positioning control Tilting spindle moulder in excellent configuration A real treat for any Martin enthusiast Pole-switchable drive motor 5/6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Max. height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed on the upper display, which is then set at the stop—this allows settings according to drawings to be easily realized Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Axes can be operated manually or automatic positioning of height and fence Fence can be swung away with lift device (for curved work) Table opening via eccentric table rings, electrically adjustable Table extensions on the right and left with extendable workpiece support Support extension up to 700 mm Table length approx. 2400 mm Swing-away fence for tenoning work Original Martin aluminum fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller HolzHer 1117 power feed, with 8 speeds, forward/reverse, new rollers Power feed socket, switchable from the control unit Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some machine parts have been newly repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830 mm (L x W x H). Weight approx. 1800 kg. Godpfx Aovv H T Rsh Doca The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this provider".

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic Gcjdpfopq If Dox Ah Dsa T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Gjdpegvqz Ijfx Ah Dsca Container volume: approx. 600 l

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric display planing thickness: digital display Feed speed: infinitely variable 5 - 22 m/min Feed roller: steel pressure beam: jointed Extraction roller: Rubber 2 x table rollers: no engine power: 9,2 kW suction connection: 160mm Machine length: 1200mm Machine width: 1200mm Weight: 1000kg Gcedpel D Rxfefx Ah Dea

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality Gcsdpfx Ajqlck Noh Dja the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2000, condition: good (used), Giardini GST UV curing tunnel Type: 1401/3+2 Year 2000 SN 90104 working width 1400 mm 2 UV lamps electronic monitoring of all functions Gjdpfx Ahoghbm Ae Dsca standard 360NM lamps used to cure transparent lacquer ( can be changed by 420 NM ) automatic and instantaneous lamp rotation to prevent the panels from being damaged should the conveyor accidentally stop Total 55 kW 400V , 50 Hz CE- marked weight 2500 Kg Dimensions: L= 300cm x W= 2250 cm technical specification under subject to correct

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, * Audio system: MB Touchscreen Media System * Bluetooth * Apple Carplay / Android Radio * Navigation system * Outside mirror base extended left/right * DAB tuner (digital radio reception) * Chassis: Stabilization level I * Start/stop system * Cup holder at the front * Leather multifunction steering wheel * Cruise control * Spare wheel holder under the end of the frame including jack * Seats in the driver's cab: Passenger double seat * Reinforced front axle * Jack * Storage compartment above the windshield * Storage compartment below the dashboard on the passenger side * Towing eye at the rear * Airbag on the driver's side * Traction control (ASR) * Outside temperature display * Brake assist * Roof panel in the driver's cab * Automatic activation for driving lights * Electronic brake force distribution (EBV) * Driver assistance system: Crosswind assist * Keyless start * Fuel tank: Main tank 71 liters * Steering wheel (steering column mechanically adjustable) * Headlight range control * Side marker lights * Engine 2.0 liter - 125 kW CDI KAT * Low emissions according to Euro 6d emissions standard * SCR system (AdBlue technology) * Seat belt system with warning system (driver's side) * Seat cover / upholstery: fabric * Seats in the driver's cab: adjustable driver's seat * Fleece battery 70 Ah * Maintenance interval display Assyst * Heat-insulating glazing * Gross vehicle weight 3.50 t * 3D spoiler (roof & side spoiler) * Tool box * Water tank with soap dispenser * Load securing rail * 12x lashing eyes anchored in the floor * Anti-slip floor * BÄR 750 KG tail lift * Premium all-aluminum construction * Sliding tarpaulin on the right * Rear view camera (extra charge) If vehicle is not in stock - short-term delivery possible! * Ask us for an individual leasing or financing offer * Net export possible * Delivery from 199¤ Not found the right vehicle? Configure your own vehicle! Whether equipment, body or engine variant. Everything at a fair price! You can also buy just the bodies for your existing vehicle from us! Do not hesitate to contact us! Gcjdpfxsm Tca Is Ah Dja Images may show special equipment that is not included in the basic price. *----*The information provided on the Internet is non-binding descriptions. It does not represent guaranteed properties. The seller is not liable for tips and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Gcsdpfswyda Ujx Ah Dea Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Year of construction: 2006, Planer Thicknesser, Hofmann AHW 511 jointer with 4-knife Tersa cutterhead Maximum planing width: 500 mm Maximum chip removal: 8 mm Thickness adjustment manual with scale Hollow-straight joint adjustment manual with scale Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead, one side of knives still new Gcodpfx Aeul Admeh Doa Planed cast tables, total length approx. 3060 mm Slotted table lips Low-noise design Swiveling fence with foldable auxiliary fence Suvamatic cutterhead guard Extraction nozzle 140 mm Emergency stop Original paint, only a few areas touched up V-belt renewed CE mark Dimensions approx. 3060 x 1000 x 1100 mm (LxWxH). Weight approx. 1100 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 1998, total width: 1,050 mm, total height: 1,400 mm, total length: 3,070 mm, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 131-021899 - Main motor power [kW]: 5.5 - Max. planing width [mm]: 410 - Infeed table length [mm]: 1500 - Outfeed table length [mm]: 150 - Total table length [mm]: 3070 - Number of knives [pcs]: 4 - Transport dimensions: 3070mm x 1050mm x 1400mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Godpfx Aewnhqyoh Djca Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels