Milling machine

Zayer

Condition: used, Year of construction: 1968, faceplate diameter 1000 mm turning diameter over slide rest 1200 mm Hsdpfx Ahswhqzze Djfr centre distance 1500 mm bed indentation . weight of the machine ca. 6 t

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Hsdpshvml Iofx Ah Dsfr Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: good (used), Technical specifications: Hsdpfx Aswchploh Dsfr Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Accessories: Side hydraulic bending aids

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Hfodpfx Ahonr Npye Der

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: Hodpfxsiw Dlks Ah Dofr - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Hfedpfx Aeiu Acpeh Der

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Hsdpfx Ajuuik Soh Dofr Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: good (used), HURON MU4 milling machine Table surface 1450 x 460 5 x 16 mm T-slots Longitudinal travel 1300 mm Transverse travel 700 mm Vertical travel 500 mm SA40 spindle 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Weight capacity 1500kg Max. head clearance 530 Spindle motor 8.8 Kw Feed motor 3.5 HP Hfsdpfx Aou Hifzsh Der Cooling by electro-pump 1.6 HP Overall dimensions: L x W x H 2,000 x 2,000 Approximate weight 4 Tons

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Hfsdpfjlbmupsx Ah Djr

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Hfjdpfx Asxddvnsh Dsr Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.