Rundtisch

Zeiss

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Rjdpfx Ameyzmbdsnow Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Year of construction: 2012, condition: reconditioned (used), Conventional Precision Lathe WEILER “CONDOR VC” Rsdexykz Aopfx Amnow With Siemens 3-axis digital readout Year of manufacture: 2012 Spindle bore: 56 mm Centre distance: 800 mm Swing over bed: 205 mm Speed range: 30 – 3500 rpm Supplied with the following accessories: Multifix tool holder Chip guard with internal lighting Coolant system 3-jaw chuck Ø 200 mm Chuck guard Follow rest Ø approx. 150 mm Tailstock with retractable quill Operating manual

Condition: good (used), Zeiss Primovert Inverted Microscope (Serial Number: 3841010097) WF 10x/20 eyepieces Zeiss Primo Plan-Achromat 4x/0.10 objective Zeiss Primo Plan-Achromat 10x/0.25 Ph1 objective Rsdpjzhidrsfx Amnew Zeiss Primo Plan-Achromat 20x/0.30 Ph1 objective Zeiss Primo Plan-Achromat 40x/0.50 Ph1 objective Ph1 / 0.3 phase slider Dust cover

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli Redpfszg Eczox Amnsw As shown in the pictures Condition: Used Good working condition Carefully removed from a functioning ZEISS CMM Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: Rjdpfx Amsm Tvz Djnow ✔ Integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ represents innovative NC rotary table solutions with the highest precision and reliability. Thanks to their robust design, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are ideal for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless rotation, and interpolative machining in a single setup Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional also with square clamping surfaces) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Support with integration and commissioning ✔ Numerous reference projects available in Germany

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is a device equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external storage of data and images. This allows for quick and easy acquisition of information about the composition and morphology of specimen surfaces, even down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both the examination of macrostructures and microstructures is possible. Through special attachments, the range of applications can be significantly expanded, enabling, for example, analytical investigations in micro-areas of the surface. The device can be operated using conventional switches or via the keyboard and mouse (optional). The electron optics and vacuum control are conventional. The functions of the image memory are operated using the keyboard or mouse (optional). A separate information display is located centrally on the control panel for displaying the menus. This user manual is intended to serve as a guide for the user to achieve the best possible results with the device. The explanations have been kept as simple as possible in order to provide even a less experienced user with the necessary knowledge. Magnification range: 20x to 300,000x at a 7 mm working distance Rsdjzdthyjpfx Amnew Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at a 50 mm working distance Resolution: 4 nm - guaranteed with tungsten filament at 30 kV, 6 mm working distance, untilted specimen 25 nm - guaranteed with tungsten filament at 1 kV, 6 mm working distance, untilted specimen 3.5 nm - guaranteed with optimized LaB6 filament at 30 kV, 6 mm working distance, untilted specimen Scope of supply: (DSM 962 with accessories as shown) Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchasing. We will be happy to answer any further questions you may have by phone.

Year of construction: 1990, condition: used, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Redot Hwqkepfx Amnjw total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Rsdpfewtg H Rox Amnsw

Year of construction: 1995, condition: used, x-travel 9200 mm y-travel 1600 mm z-travel 2400 mm dia. of test piece mm working area mm dist. between centers mm control ZEISS C 99 total power requirement kW weight of the machine ca. 30 t Rjdpot Hwwkefx Amnow dimensions of the machine ca. 10 x 3,6 m

Condition: used, Large ZEISS coordinate measuring machine with a Renishaw probe. Complete system removed from a working laboratory. Calibration documentation from 2025 is available. Immediate delivery possible. Redpjzga D Hsfx Amnjw

Condition: new, Year of construction: 2025, functionality: fully functional, turning height: 1,400 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, total height: 5,190 mm, total width: 4,875 mm, total length: 3,885 mm, rotational speed (max.): 360 rpm, torque: 17,880 Nm, table load: 8,000 kg, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, Vertical turret lathe in flat-guided design with extensive full equipment: WITH MILLING FUNCTION - Milling spindle 2000rpm SK50 22 KW - C - axis 0.001 degrees - Complete housing - Chip conveyor - Internal coolant supply - Fanuc control - 24 tools - 12 milling tools - Manual Guide I - Tool holder package - Electronic handwheel - Signal light - Manual 3-jaw faceplate 1250mm - Renishaw tool measurement - Renishaw workpiece measurement Rsdpovtzc Ijfx Amnow - Glass scales in X and Z axes - 24 month guarantee

Condition: used, Feeler gauge Passimeter Manufacturer: Zeiss Jena 0-25 mm in a wooden box Rjdpfx Amjda Abaenjw

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing Rodpfoy Iub Ssx Amnsw - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! Redeq R N Tqspfx Amnew also available as Craneset

Condition: ready for operation (used), Zeiss 608093 9203 ÄZ02 35/05 Path measurement 32 Prismo / Wegmessung 32 Prismo-ST 608093-9203-701, used, as good as new condition, 100% functional Rjdpoy T Dp Asfx Amnsw