Single shaft shredder ZTLL 1400 x 1600

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1400 x 1600

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 231890, Timber drying kiln MÜHLBÖCK, complete with heat recovery system, model 1306. Depth: 4x120 cm, height: 3x120 cm, timber length: 5.20 m. Heating capacity: 225 kW. Flow temperature: 90°C. Water volume: 13 m³/h. Electrical connection power: 20 kW. Fans: 3x3.0 kW and 2x4.0 kW. Complete with control container.\n\nAdditionally, timber drying kiln VANICEK VF522/2D, year of manufacture 2000, complete. Heating capacity: 174 kW. Water temperature: 80/70°C. Water volume: 15 m³/h. Electrical connection power: 4.4 kW. Fans: 4x1.1 kW.\n\nBoth drying kilns must be dismantled by the buyer as soon as possible. Knedpfx Adsv Habisbod

Condition: good (used), Year of construction: 2008, Lindner Power Komet 2800 from 2008, used for the production of RDF. The machine is fully functional, has been regularly serviced, requires regeneration of the rotor and pressure Technical specifications: Model: Lindner Power Komet 2800 Year of production: 2008 Application: Production of applied fuel (RDF) capacity: 7-9 tons per hour with a 40 mm sieve Technical condition: good, works, dismantled until the end in January 2025 serviced on an ongoing basis Knsdpfsvt Uc Uox Adbod

Year of construction: 1985, condition: good (used), FILLETING LINE FOR FISH Kjdod Dtuhopfx Adbend Item: D-1640-Baader-FilletingLine Manufacturer: Baader Consist of Model: 478 Year of manufacture: 1985 Has been used for sardines Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 . Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Kodpfx Ajv N D E Rjdbend Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: excellent (used), Year of construction: 2014, operating hours: 753 h, functionality: fully functional, machine/vehicle number: 60501401, type of input current: three-phase, total width: 2,000 mm, total length: 4,100 mm, total height: 2,800 mm, protection type (IP code): IP54, power: 30 kW (40.79 HP), Mechanical vapour recompression vacuum evaporator with forced circulation for water treatment. Ksdetuklhspfx Adbond Nominal production of distillate: 15000 l/24h Comissioned in 2014 and hardly used, fully functional.

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Knjdpfxjk N Iy Ns Adbjd Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: good (used), Year of construction: 1998, Was used till 2017. Withth all documentation. With Weishaupt G5/1-d ZMD natural gas burner. Max power is 940 KW Kedpfxeiqb A Ie Adbend

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table Kedpoufi Rxefx Adbsnd

Year of construction: 1976, condition: excellent (used), Full frame saw / frame saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 75HP, 380V, 50Hz max. passage 710 mm stroke: 500 mm with splitting wedge Marathon 2 very good condition - available immediately Knodpfopyglijx Adbsd Location: Austria, near Feldkirch

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded 800 x 500 x 180mm Knjdpfxed Evl Dj Adbjd completely welded housing Ring eyelets for suspension