Profile bending machine

Zopf ZB 60 M

Condition: used, Year of construction: 2005, I - beam section - flat steel 80 x 15 (Ø350) mm I-beam section - upend 50 x 10 (Ø400) mm L-beam 40x40x5 (Ø400) mm tool adaptor Ø 30 Welle mm turning speeds 7.0 U/min tube diameter rund 60x1.5 (Ø1000) mm tube diameter vierk 40x2.9 (Ø1000) mm total power requirement 0.75 kW weight of the machine ca. 160 kg dimensions of the machine ca. 650 x 600 x 1400 mm Features: - Electric-motor-driven ring profile bending machine - Two driven rollers (lower rollers) - Manual adjustment of the upper roller - Includes analog position indicator (mm scale) Ljdpfx Aezluk Eoi Hjrr - Shafts mounted with tapered roller bearings - 2 side guide rollers - Machine base frame - 1 freely movable control unit * Rollers can run clockwise or counterclockwise - Various rollers included in the scope of delivery

Condition: new, Year of construction: 2026, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Lodpfx Aet D D Nzei Horr Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: used, functionality: fully functional, Year of construction: 1996, Ring bending machine, ZOPF model ZB 60 M Lrjdpfx Aiozl Ud Es Hor - motor-driven - Two-roller drive - Shaft diameter 30 mm - with standard rollers - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 180 kg - Motor 0.75 kW, 400 V, 50 Hz, 3-phase

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller Lrsdpfx Aeyv N A Hji Hor - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller Lrodpfot Hwfnjx Ai Hsr - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space required: 600 x 450 x 175 mm Lrsdpjb Ez R Uefx Ai Hsr Weight: approx. 100 kg

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 Lrjdpfxjx H Rmus Ai Her MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Lrodsul Svlspfx Ai Her The machine is fully refurbished and tested.

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels Ljdpovz Ec Iefx Ai Herr - milling arbors - Clamping device Dra8M7 - documentation

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, incl. complete set of accessories such as video camera, spiral back-feed device Lrjdpfx Aeypcd Aei Her