Used accessories and spare parts for lathes for sale (275)

Condition: excellent (used), ZVE152724 Swivel Motor Spindle 24000 HSK-T40 Milling spindle for HT45PM Supplier: Siemens Weiss Technical data: Speed: 24,000 rpm Torque: 21.5 Nm (S1) Power: 11 kW (S1) Interface: HSK-T40 Clamping torque: 300 Nm Lubrication: Grease; lifetime lubricated Drawing no.: 180020 Cjdpfx Adjxxamfedjhf

Condition: excellent (used), Vise for lathe Jaw width 100 mm maximum opening width 100 mm Codpfx Adef Dx R Asdjhf vertical adjustment 100 mm Total height 300 mm

Condition: used, TECHNICAL DETAILS - Bar diameter : 6 - 80 [mm] - Bar length : 1600 [mm] POWER SUPPLY - Supply voltage : 200 - 480 [V] - Total installed power : 5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2048 x 1486 [mm] - Machine height : 1748 [mm] - Machine weight : 600 [kg] Chedpfx Aox Ddg Hjddof

Condition: new, functionality: fully functional, Spindle unit MKK05-012-25-60-080-00340 Original packaging, from stock with documentation EMAG order number: 20399062 Csdpfx Adsxz Al Asdjhf

Condition: good (used), Internal item no.: 25090 Driven tool holder Index / Traub No.: W 7045003 B Very well-maintained condition! Chsdpoxu Uz Nefx Addof The holder was used on a Traub TNL18.

Condition: used, weight / kg Codpfx Aoxwdyajddehf taper MK /

Condition: used, Manufacturer unknown! Clamping plate, diameter approx. 800 mm with KK8 mounting. Manufacturer unknown! EUR 325,-- net per piece. Chedpew R Razsfx Addjf

Condition: excellent (used), Four-jaw lathe chuck (2859) Make Klopfer Cedpfx Aotuvnyjddjhf diameter 300 mm Short taper size 6 Taper diameter 106.39 Pitch circle diameter for stud 133.4 mm Chuck height 110 mm

Condition: new, Year of construction: 2023, functionality: fully functional, Atling steady rest Type: AX4E NAOS 12 160 Chsdsxvibmopfx Addsf Cylinder diameter: 80 mm Max pressure: 70 bar

Condition: new, functionality: fully functional, Spindle unit MKK05-026-23-60-080-01024 Csdpfexz Ahdox Addehf Factory-sealed, from stock with documentation EMAG order number: 20596156

Condition: good (used), Internal item no.: 25091 Driven tool holder Adjustable angle head Index / Traub No.: W 7045011A Very well-maintained condition! Csdpfx Adjxvaqlodohf The holder was used on a Traub TNL18.

Year of construction: 1998, condition: used, bar max. 75 bar piston stroke 0 mm revolutions per minute 0 U/min 2 pcs. available. Price is for 1 pc. Csdeu Sbcvopfx Addehf

Condition: good (used), Faceplate 450 mm Passage 100 mm Chodpsxyqptefx Addof Taper size 8

Condition: excellent (used), Tailstock VDF S 450 (28549) MK 5 Center height 230 mm Pinole diameter 80 mm Base area 355 / 275 mm Chjdjuf Rwajpfx Addjf Transport dimension : L.630 mm W. 275 mm H.400 mm Weight 120 kg

Condition: used, Tool turret TER Type:0.5.480.525 Chedpfx Aevi Hvleddef The article is used, comes from an industrial machine dismantling and was in operation until the dismantling. Please note that this is a sample image, which may have different traces of use and/or software. Brand names, trademarks and registered trademarks are the property of their legal owners and are used here for descriptive purposes only. Further information can be found on our homepage *

Year of construction: 2001, condition: used, volt 200 V KW 2 KW In our opinion, the machine is in good used condition and can be inspected Cjdpfx Aoxrg A Tjddehf under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: good (used), Internal item no.: 25088 Chsdoxu Dcvepfx Addof Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm Cedpfoxrlfgex Addehf -Weight: 1.4 kg

Condition: good (used), Fixed steady rest with roller inserts Max. clamping diameter: 200 mm Centre height approx.: 250 mm Below: 2 (individual) counter-supports Csdexyqpgspfx Addehf Most likely from a VDF lathe

Condition: good (used), Support milling motor RUWO Weitmann Mod.SFE 20/G3 4 milling spindle speeds Motor 380 Volt Csdpfx Aottk U Ejddshf 2800/1400 n1/min. 0,55 / 0,44 kw Accessories : 5 collets : 5-6-10-12-16 mm Transport dimension : L.500 mm W.250 mm H.350 mm Weight 48 kg

Year of construction: 1999, condition: used, ja VDI 20 number 3 Stück im Paket +++++ Please note: Chjdehr Sv Tepfx Addjf The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm Cjdpfxexrk T Ns Addohf -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg

Condition: excellent (used), Top support Heyligenstedt (28493) Height of clamping surface to steel support 103 mm Length 690 mm Width 250 mm Total height 240 mm Chsdpfx Adjttk Smsdjf Bolt circle diameter 225 mm Multifix basic holder size C Weight 56 kg

Condition: excellent (used), Tailstock MK 5 Chodpfxjtrnhfs Addef Center height 355 mm Clamping surface . width 310 mm length 450 mm Quill stroke 160 mm Quill stroke diameter 90 mm Transport dimension: L.700 mm W.310 mm H.480 mm Weight 170 kg

Condition: excellent (used), Tailstock (28485) Make Heiligenstedt MK 5 SPH 275 mm Pinole diameter 80 mm Chedpfx Astrnh Uoddjf length 600 mm width 300 mm Height 400 mm