Used beverage production for sale (1,064)

Condition: used, Year of construction: 1992, Overview Fsdsy Hkl Dopfx Afpspi These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1992 - Quantity: 4 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 200 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Fpodpfjy Hkkysx Afpoi Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1985 - Quantity: 5 units - Type: Pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 100 hl per tank - Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank Fodpoy Hkkaofx Afpepi - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 500 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm

Condition: used, Year of construction: 2002, Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: Twin Pack - Model: MDEL - Machine type: Handle applicator (carry handle machine) - Year of manufacture: 2002 - Application: Application of carry handles for beverage multipacks Fsdpfxjy Hkhfo Afpspi - Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment - Automatic carry handle application system - Suitable for various multipack configurations - Integration capability into existing bottling and packaging lines

Condition: used, Year of construction: 2015, Overview Fedpfxey Hkghe Afpjpi This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data - Capacity: - approx. 1,200 bottles/hour (standard labels) - up to approx. 1,500 – 1,800 bottles/hour (small labels) - approx. 1,100 bottles/hour (front and back from one roll) - Formats: Diameter 50 – 100 mm, conical bottle shapes - Application: Bottle labelling (beverage, wine, spirits) - Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll - Label positions: Front, back - Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table

Condition: used, Year of construction: 2002, Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Fodpfsy Hkauex Afpspi - Manufacturer: SMI - Model: LSK 45 T - Machine type: Shrink wrapping machine (film packer) - Year of manufacture: 2002 - Capacity: approx. 45 packs per minute - Packaging type: Shrink film (with film discharge) - Application: Packaging of beverage multipacks - Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2x3 x 1.5 L Additional Information - Machine was used in beverage production for disposable bottle packaging - Designed for flexible multipack configurations - Currently stored and available for shipment

Condition: used, Year of construction: 2002, Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data - Manufacturer: SMI - Model: TF 300 - Machine type: Tray forming machine (tray erector / tray packer) - Year of manufacture: 2002 Fjdpfx Afsy Hi U Depspi - Capacity: approx. 23 packs per minute - Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment - Automatic tray forming system - Suitable for beverage multipack tray applications - Integration capability into existing packaging lines

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 Fodpfx Aoy Etqmsfpepi - 2.0 L – 3×2 - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only)

Condition: used, Year of construction: 1993, Overview  This filling monobloc was manufactured in 1993 by the companies PERRIER / GANGLOFF / ZALKIN / CTA. The machine is designed for filling still water and was originally configured for glass bottles and later retrofitted for PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. In 2006, an air filtration system (CTA DA001) was added. The CIP system is integrated. Technical data  - Capacity: approx. 6,000 bph (1.5 L) - Formats: 0.5 L / 1.5 L Fpedoy Etd Topfx Afpsi - Application: Filling of still water (PET bottles) - Configuration: 16 rinsing heads / 20 filling valves (atmospheric) / 6 capping heads - Neck finish: 30/25 - Incl. Cap feeder, Air filtration system, CIP system

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  Fpsdpfx Afsy Etdgepei - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Condition: used, Year of construction: 2003, Overview This PALL Microflow filtration system is designed for the crossflow filtration of beer, enabling continuous and fully automated clarification processes. The system is configured as a tandem installation with a capacity of up to 50 hl/h, suitable for medium to high-capacity brewery operations. It operates with membrane filtration modules, allowing gentle product handling and stable filtration performance. The unit includes pumps, integrated CIP system, and Siemens-based automation, ensuring a high degree of process control and hygiene. Fedpfxsy Etcps Afpjpi Technical Specs  - Capacity: approx. 50 hl/h (tandem system, 24h operation) - Filtration type: Crossflow (microfiltration) - Number of modules: 48 - Operating temperature range: 0°C to 70°C - Equipment: Pumps, integrated CIP system, complete piping, control system - Control system: Siemens S7 with Siemens OP07 HMI - Automation level: Fully automatic Equipment  - Filtration modules (48 units) - Product pumps - Integrated CIP system - Complete piping system

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data - Keg washer manufacturer: M+F Keg Technik - Keg washer model: Monomat + RMT - Year of manufacture: 2019 - Capacity: approx. 12 kegs/hour - Keg filler: Included (manufacturer unknown) - System type: Semi-automatic keg washing and filling setup Equipment Fedey D Ertepfx Afpjpi - Keg Technik Monomat + RMT keg washer - Keg filling system (standalone unit) - 195 x 30 L stainless steel kegs (Type S/A) - 39 x 50 L stainless steel kegs (Type S) - 22 x 20 L stainless steel kegs (Type A) - 22 x 10 L stainless steel kegs (Type S) - 10 x beer taps (various manufacturers)

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Fpedpoy Azv Sefx Afpji - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Fjdpfxjy Azu Uj Afpopi - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: used, Year of construction: 1997, Overview This rotary pressure filling machine was manufactured in 1997 by NATE. The Veral 60-12 is designed for the filling and closing of beer and carbonated beverages in glass bottles. The machine operates as a pressure filler with vacuum pre-evacuation, ensuring stable filling conditions for carbonated products. It has been fully overhauled in 2023, including reconstruction of filler, capper and vacuum pump. The machine is not yet in production after rebuild and is prepared for PLC and control system integration (not included).  Technical data - Capacity: approx. 20,000 bph (500 ml) - Formats: 0.5 L long neck / 0.66 L / 1.0 L - Application: Filling of beer and carbonated beverages - Configuration: 60 filling valves / 12 capping heads - Filling system: Pressure filling with vacuum pre-evacuation - Filling pressure: approx. 0.05 – 0.06 MPa - Product temperature: approx. 1 – 7 °C Fjdpfx Afey Azrtjpspi - Material: Stainless steel (AISI 304 / 316)

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. Fpodpfx Afey Azq Nspei The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data - Direction of operation: RM - Capacity: approx. 2,500 bottles per hour - Speed range: approx. 800 – 3,000 bottles per hour - Labelling technology: Self-adhesive - Labelling station: - 1 × self-adhesive labelling unit (HERMA) - Label speed: approx. 40 m/min - Roll diameter: 300 mm - Label height: up to 240 mm Fpodpoyzc H Nofx Afpoi - Bottle Formats - Bottle types: Swing-top (bail closure) bottles, other bottles also possible - 500 ml – Ø 66 × 280 mm - 1,000 ml – Ø 85 × 316 mm - Label Data - Label dimensions: approx. 160 × 17 mm - Application type: U-seal label - Electrical Data - Control system: Siemens S7-1200 - Operator panel: Sütron 7” - Power supply: 400 / 230 V - Frequency: 50 Hz - Equipment / Features - Alignment system for swing-top closures  - Bottle orientation system in infeed star - Conveyor height: approx. 1,000 mm - Electrical cabinet lighting - Socket integrated in control cabinet.

Condition: used, Year of construction: 2026, Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data - Capacity: up to 48,000 bph (500 ml PET) - Formats: 500 ml PET bottles - Application: Blowing, filling and capping of PET bottles - Configuration: - Rotary stretch blow moulding machine SBF412 (2-cavity configuration) - Electronic-volumetric filler with 120 valves - Fully electronic capper (FEC) with 20 heads - Neck finish: 26/22 GME 30.40 - Cap type: Plastic screw flat / press-on caps - Filling technology: Electronic-volumetric - Products: Carbonated water, still water, carbonated soft drinks - CO₂ content: up to 8.5 g/l - Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks) Scope of Delivery Fjdpfxjyzc Hpe Afpspi - Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible - Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves - Capper | Acmi | FEC | 20-head capper for screw and press-on caps - Cap Feeder | Operator level waterfall orientation and feeding - Preform orienter |Operator level preform feeding - Preform insertion control | Control system - Blowing air recovery system | For pre-blow and line - Cooling system | Water recirculation on combo interface - Automation package | PLC teleservice, Ethernet, UPS, remote access - Lubrication system | Automatic centralized lubrication - Foaming unit | Automatic system

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data - Construction: Stainless steel frame for hygienic industrial use - HMI: Integrated touchscreen for operation, calibration, and product changeover - Electrical Data - Power supply: AC 230 V, single phase - Current: 11.0 A - Frequency: 50 / 60 Hz Fedpfx Ajyzc D Usfpepi - Inspection Function - Detection of foreign bodies: - Metal - Glass - Stones - High-density plastics - Additional capabilities: - Product integrity verification - Detection of missing components - Density-based inspection

Condition: used, Year of construction: 2021, Overview This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 6,000 bottles/hour Fpedeyzcyvepfx Afpoi - Formats: 0.33 L / 0.5 L glass bottles - Application: Labelling of glass bottles (beer) - Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) - Label positions: Body / wrap label, neck / chest label - Utilities: 400 V / 50 Hz / GND / N Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) - Glue system | Krones | Glue pump - Control system | GERNEP | Touch panel

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data Fsdpfx Asyzcycsfpopi - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 5,500 bottles/hour - Formats: - 0.75 L Bordeaux (H=309 mm, Ø74 mm) - 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 L Schlegel (H=309 mm, Ø89 mm) - 0.75 L Burgunder (H=297 mm, Ø82 mm) - Application: Labelling of glass bottles (wine) - Configuration: Rotary machine with 2 cold glue labelling aggregates - Label positions: Body (front), neck ring, back - Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates - Glue system | Krones | Glue pump - Control panel | GERNEP | Touch panel

Condition: used, Year of construction: 2001, Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. Fpodpfx Asyy Sqzjfpoi The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data - Capacity: approx. 40 trays/min - Formats: - 24 × 0.5 L cans - 15 × 0.33 L sleek cans - 4 × 6 × 0.33 L bottles - 6 × 4 × 0.33 L bottles - 8 × 3 × 0.33 L bottles - 3 × 6 × 0.5 L bottles - Application: Packaging of cans and bottles - Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery - Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) - Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink tunnel - Conveyor system | Gebo | Integrated product transport - Control panel | Siemens | SIMATIC OP17 | Operator interface

Condition: used, Year of construction: 2011, Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data - Capacity: approx. 12,000 bottles/hour - Speed range: approx. 3,000 – 18,000 bottles/hour - Formats: 700 ml / 750 ml / 1,000 ml glass bottles - Application: Labelling of glass bottles (spirits) - Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) - Label positions: Body (front), back, neck ring, additional labels Fpsdpfx Afsyy Ad Sepji - Utilities: 400 V Scope of Delivery  - Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labeller with cold glue and self-adhesive units - Self-adhesive units | HERMA | 2 units, up to 70 m/min - Control system | B&R | Touch panel control

Condition: used, Year of construction: 2017, Overview  This robot palletizer system was manufactured in 2017 by Italy BEMA. The system is designed for palletizing Bag-in-Box products (5L and 19L) for water and syrup applications. It consists of a robot palletizing system with Fanuc control, pallet magazine and stretch wrapper. The machine was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The system is fully operational, is available immediately, and can be visited on request. Maintenance was carried out twice per year. Technical data  - Capacity: - 5L BIB: 650 BIB/h – 7 pallets/hour - 19L BIB: 420 BIB/h – 13 pallets/hour - Formats: 5L / 19L Bag-in-Box - Application: Palletizing of water and syrup products - Configuration: Robot palletizer with Fanuc R-30iB system, pallet magazine, stretch wrapper Scope of Delivery  - Robot palletizer | BEMA | FANUC R-30iB | 2017 | Palletizing robot system Fpsdpfjyyl S Ejx Afpei - Stretch wrapper | BEMA | SILKWORM LS | 2017 | Pallet stretch wrapping unit - Pallet magazine | 2017 | Pallet handling system - Tooling set | 2017 | 2 tools for 5L and 19L BIB

Condition: used, Year of construction: 1998, Overview The FAMIX 35000 deareator and decarbonater was built in 1998 by the German manufacturer H. FALTERBAUM FAMIX-MASCHINENBAU GMBH. The machine was in use in a mineral water company in Germany. Due to a restructuring of the complete company, new filling lines will be purchased and this machine becomes available for sale. The machine is still assembled on site and under power. Tech Specs: Fpjdpeyylv Refx Afpei - Capacity: 35,000 l/h - Control: Siemens S5 Specialty: - Spare parts available - Technical documentation available