Used beverage production for sale (1,064)

Condition: used, Year of construction: 2012, Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  - Type: Isobaric fermenting and lagering tanks - Manufacturer: EtD (Talleres Esteban Tolosa) - Years of Manufacture: 2012 – 2024 - Total Units: 10 (7 fermenters + 3 lagering tanks) - Working Pressure: 3 bar - Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks Fsdpsyb S A Sefx Afpjgd - 3× 45 hL (net 45, gross 47) | EtD | 2012 - 2× 50 hL (net 50, gross 55) | EtD | 2024 - 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks - 3× 50 hL (net 50, gross 55) | EtD | 012 | Horizontal isobaric with carbonation stones

Condition: used, Year of construction: 2010, Overview  This complete 600L brewhouse and fermentation line was manufactured between 2009 and 2014 by Cespedes (Spain) and Cerveza Artesana SL. It includes mashing and boiling kettles, fermenters (both isobaric and atmospheric), utilities, and packaging equipment. The line was used for small-scale craft beer production and remains in good overall condition, available immediately. Technical data - Main Manufacturers: Cespedes, Cerveza Artesana SL, Stellin, Duofiller - Year of Manufacture: 2009–2014 - Capacity: 600L brewhouse / fermenters up to 1,200L Fodeyb Sxyspfx Afpsgd - Heating System: Electric resistances (mash & boil kettles) - Filling System: Semi-automatic can and bottle filling - Utilities: Includes pumps, heat exchanger, and carbonation equipment - Condition: Good, complete and ready for installation Scope of Delivery  - Mashing tun | Cespedes | – | 2010 | Dimensions in cm: 200×110×110 | 600 L, electrically heated (2×4500 W) - Wort pan | Cespedes | – | 2010 | Dimensions in cm: 140×100×100 | 600 L, electrically heated (2×4500 W) - Atmospheric fermentation tank | Cespedes | – | 2010 | Dimensions in cm: 240×90×90 | 500 L - Atmospheric fermentation tank | Cespedes | – | 2010 | Dimensions in cm: 230×90×90 | 500 L - Isobaric fermentation tank | Cespedes | – | 2012 | Dimensions in cm: 230×130×130 | 578 L, 1.1 bar - Isobaric fermentation tank | Cerveza Artesana SL | Serbato10 | 2014 | Dimensions in cm: 285×130×130 | 1,200 L - Hot water tank | – | – | – | Dimensions in cm: 150×90×90 | 450 L, electrically heated (2×3200 W) - Cooling plate | Cespedes | – | 2010 | – | 172 kW, 10 bar - Pump | Ebara | CDHM 90/10 MF | – | – | Stainless steel - Pump | Tellarini | ALM25 | – | – | Bidirectional - Grind mill | Cespedes | – | – | – | – - Filling machine | Duofiller | Core G3 | – | – | Semi-automatic - Can sealer | Cannular | – | – | – | Semi-automatic - Labeling machine | Stellin | PE-A | 2009 | – | 0.09 kW, 230 V, 50 Hz - Carbonation stone | – | – | – | – | 0.5 µm

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts Fedpfsyb Sxaex Afpsgd - Plate heat exchanger - Compatible with standard bottle formats

Condition: used, Year of construction: 2001, Overview  This flash pasteurizer was manufactured in 2001 by German company Krones / APV. The unit was previously operated in a mineral water production facility in Germany. Following the replacement of the complete line, the machine was dismantled and sold individually. It is available immediately and currently in stock. The reason for sale is a line upgrade. Technical data - Type: Flash pasteurizer (short-time heating system) - Application: Alcohol-free beverages / mineral water - Capacity: - Guaranteed throughput up to 22,000 l/h - Adjustable down to 10,000 l/h - Process design: - Plate heat exchanger with regeneration, heating, degassing and cooling sections - Integrated degassing unit - Buffer tank with internal circulation - Electrical connection: - 230 / 400 V, 3 Ph, 50 Hz - Control voltage: 24 V DC - Execution: - Stainless steel construction - CE-compliant according to EU machinery directives - Control & instrumentation: Fgedpsyb Sw Asfx Afpjd - Measurement and control technology - PLC-based control system - Electrical cabinet - Interfaces: - Mechanical and electrical interfaces according to Krones / APV standards  

Condition: used, Year of construction: 2020, Overview This tray packer was manufactured in 2020 by the Italian manufacturer Robopac. The machine was serviced every year, last maintenance was in November 2025. It´s equipped for the packing of cartons.    Technical data  - Type: Dimac Laser TX - Year of manufacture: 2020 - Total output: 20 cycles/min - Adjusted for the following formation:  - 2x1 - 3x1 - 4x1 - Adjusted for the following carton sizes: - 88 x 177 x 245 mm Fgjdeyb Stdepfx Afpjd

Condition: used, Year of construction: 1996, Overview  This automatic crater was manufactured in 1996 by the German company Otto Fleischer. The Rota/1/E model is a single-head packing machine. It is still installed and immediately available. Technical data  - Manufacturer: Otto Fleischer - Type: Rota/1/E - year of manufacture: 1996 - Bottle formats processed: 0.7L (GDB) - Operating pressure: approx. 6 bar - Power supply: 380 V / 50 Hz / N / PE Fgodpeyb Srtjfx Afpsd - Connected load: approx. 4 kW - Control voltage: 24 V

Condition: used, Year of construction: 1993, Overview  This decrater was manufactured in 1993 by the German company Otto Fleischer. The Rota/1/A model is a single-head unpacking machine. It is still installed and immediately available. Technical data  - Bottle formats processed: 0.7L (GDB) and others  - one-head operation - 90° infeed-outfeed design Fedpeyb Srgsfx Afpjgd - Operating pressure: approx. 6 bar - Power supply: 380 V / 50 Hz / N / PE - Connected load: approx. 4 kW - Control voltage: 24 V

Condition: used, Year of construction: 2012, Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. Fjdpjyb Sqvjfx Afpogd The conveyor system is not included, the inlet and tray magazine are included. Technical data  - type: VP500 - year of manufacture: 2012 - Total output: 20 cycles/min - length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm - packaging data:  - length: 100-300 mm - width: 200-450 mm - height: 60-350 mm - height of tray edging: 40-100 mm - pre-cut: - length: 200-500 mm - width: 290-600 mm - power: 400V,N,PE | 10kW/33A |  - air: 6-7 bar | 20 NL/cycle

Condition: used, Year of construction: 1982, Overview  This bottle unpacker was manufactured in 1982 by German company Joha. The machine was part of a bottling line operating at 2,500 bph and is immediately available. Technical data - Capacity: - Part of a line running at 2,500 bph - Formats: Fgjdpfx Asyb Snzofped - Prepared for 0.33 L Longneck - Unpacking head: - Packing head for 24 bottles in a modular crate

Condition: used, Year of construction: 2016, Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  - Performance - Product infeed online: max. 280 jars/min - Format 3: max. 220 jars/min - Mix type A: max. 140 jars/min (11.5 cartons/min) - Mix type B: max. 140 jars/min (11.5 cartons/min) - Total output: max. 350 jars/min or 30 cartons/min - Carton erector & lidder: 23.5 cartons/min - Changeover time Format change: approx. 15 minutes - Formats / packaging specifications - Format 1: 12-jar tray, 2 layers, 350 g jars - Format 2: 6-pack tray, 2 layers, 720 g jars - Format 3: 6-pack tray, 2 layers, 580 g jars - Format 4: 6-pack tray, 2 layers, 1,000 g jars - Format 5 (mixed formation): Combination of different jars, automatic mixing via separate belts - Operating hours: approx. 5,000 (of which approx. 2,000 are pure production) - Power supply - Electrical: 3x 400 V / N / PE, 50 Hz - Pneumatic: min. 6 bar – max. 12 bar, oil-free, residual oil content max. 0.1 mg/m³ (ISO 8573-1 Class 2) System components - Buhmann C300 carton erector (wrap-around trays) - Buhmann PF800 packing unit - Yaskawa robot with gripping units - 2x Nordson PROBlue 4 gluing devices - Separate feed belt for offline products (mixed cartons) Fodpsyb Snbsfx Afpjgd - Carton sealing unit

Condition: used, Year of construction: 2014, Overview The handle applicator was manufactured by the German company B&W Solutions GmbH in 2014 and until now it was part of a PET filling line for water.  Technical data  - Total output: 60 cycles/min - one lane - length 3660 mm | width 1790 mm | height 2500 mm - recommend specifications: Fedpfx Aoyb Sm Dofpegd - Adhesive Strips: Width: 25 mm, Thickness: 78 μm, Adhesion to PE: 30 N/cm², Elongation: max. 40% - Paper/Cardboard Strips: Thickness: 180–350 g/m², Width: 20–25 mm (±0.4 mm), Length: 150–240 mm (±0.4 mm)

Condition: used, Year of construction: 2018, Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  - year of manufacture: 2018 Fjdpoyb Smdefx Afpegd - Capacity: approx. 20,000 /h - Bottle Formats: 0.5 L, 1.5 L PET  - Worked Labels: IN REEL - Reel Change: Automated - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC - Protection Class: IP 54 (main panel and motors) - Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) - Versatility: Capable of handling a wide range of container shapes and sizes (glass, PET, cans). Scope of Delivery  - Krones ERGOMODUL labeling machine (2018) - CE certification, operating and maintenance manuals, wiring diagrams - Spare parts and format change components - Drying System | KRONES-LINADRY | 2003 - Labelcheck | KRONES | Checkmat

Condition: used, Year of construction: 2014, Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data - Inspection functions: Fedpfoyb Sk Nex Afpegd - Overfill and underfill detection using HF (high-frequency) method - Closure control via integrated sensor for metal caps (mounted in filler) - Condition: Excellent, fully functional before dismantling - Status: Dismantled and stored, ready for shipment - Application: Bottling lines for beverages with metal closures - Included components: Trigger sensors, encoder, and pusher

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details - Manufacturer: NATE (Czech Republic) - Model: Veral 60 - Year of Manufacture: 2004 - Number of Filling Stations: 60 - capacity: 20.000 bottles/h - Filling Method: Counter pressure (overpressure) Fjdpfx Afsyb Si Sopjgd - Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB - Condition: Well-maintained, fully operational

Condition: used, Year of construction: 2011, Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data - Application: Beer and other carbonated beverages - Capacity: 6,000 bph - Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) - Ring Bowl Diameter: 960 mm - Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) - Pitch: 125 mm - Operating Hours: 7,200 h Fgodpfx Aeyb Silsfpjd

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  - Capacity: - 2,500 bph - Formats: - Prepared for 0.33 L Longneck - Filling temperature: - 6°C - Overhaul & refurbishment details - General overhaul in 2016: Fgedpfsyb Sdvox Afpod - Pre-evacuation - New rotary ball connection - New stainless-steel table - New electrics - New valve control cabinet in stainless-steel design - 0.33 L guiding set - Sihi vacuum pump - Renewed in 2023: - Seals on lifting cylinders and filling valves - Vacuum and overpressure valves equipped with new seals and springs

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets Fgjdpfx Afsyb Sbuepsd - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) Fedoyb Sa Dspfx Afpjgd - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. Fodpfxeyb R Uao Afpegd The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data - Capacity: up to 20,000 bph - Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles - Condition: Line in good condition - Availability: Immediate - Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer

Condition: used, Year of construction: 2004, Overview: Fgodpoyb R Rnofx Afpsd Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: - Manufacturer: Dr. Datz Maschinenbau GmbH - Type: BVM 24R - Year of Manufacture: 2004 - Number of Capping Stations: 24 - Closure Type: Wire bail closures - Machine Direction: Left to right

Condition: used, Year of construction: 2017, Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Fgedsyb R Itopfx Afped - Capacity: 5/10hl - Electrical heating: 27kW / 400V (special ceramic heating element) - Equipment: - 3 appliances: brewing kettle, lauter tun, whirlpool - Additional equipment included: - Manual filler (wall-mounted) - Keg filler - 2 fermentation and storage tanks (650L each) - 1 fermentation and storage tank (1200L) - All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) - Glycol cooler - Plate heat exchanger Scope of delivery  - 1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) - 1x manual filler (wall-mounted) - 1x keg filler - 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) - 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) - 1x glycol cooler - 1x plate heat exchanger

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) Fodpfx Afsyb R Iaepogd - Glycol chiller for CCTs - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Condition: used, Year of construction: 2014, Overview This robot-palletizer was built in 2014 from German manufacturer Kuka. The machine has 2 different gripping heads for the handling of KEG´s and plastic crates. It´s equipped with 6 axes and is in a good condition. The machine was serviced every year and dismantled in 2025. Technical Details - Capacity - Depend on layer formation - Equipped for the handling of: Fedpfx Afjyb Rycepogd - KEG´s - Modul crates

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery - 4 units Brewhouse | Shandong | 20-25HL | 2019 - 1x mash tun - 1x lauter tun - 1x boiling or wort tun - 1x whirlpool - Manual shut-off valves - Cooling of fermentation tanks is automated - Malt mill | Shandong | 2019 - Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 - 200 kg/ h - Oil-fired, but can also be operated with gas by replacing the burner - Wort cooler, 2-stage | Shandong | 2019 - 2x cooling unit (glycol) | 2019 - 2x 28kW - Glycol tank - Hot water tank - 6x Fermentation tanks | 2760l | 2019 - 3 bar, insulated with jacket cooling, CIP capable - 12x Storage tank | 2760l | 2019 - 3 bar, no cooling, were in a separate cold room - Reverse osmosis - Compressor | JAN | 585l/ min | 2020 - KEG filling Fedpeyb N N Ajfx Afpsgd - 1x drum washer with automatic caustic refill and steam-heated - 1x keg filler - Up to 70 barrels/ h, - Fitting: Type S, basket fitting, - Siemens S7 - Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc.

Condition: used, Year of construction: 2020, Overview  This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  - Brewhouse capacity: 5 hl - Design: 2-vessel brewhouse - Heating: Steam-heated - Control: Semi-automatic PLC (Siemens) with touch panel - Fermentation: Open fermenters with cooling jackets Scope of Delivery - Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding - Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping - Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) - Water Mixing Station | — | — | 2020 | Solenoid valve, mixer, meter - Brewhouse Control System | Siemens (PLC) | — | 2020 | Semi-automatic, recipe control - Steam Generator | — | — | 2020 | Gas-fired, incl. water treatment, TÜV & CE - Open Fermenters (2x) | Speidel | — | — | 625 L each, with cooling jacket - Horizontal Storage Tanks (5x) | — | — | — | 500 L each - Hot Water Tank | — | — | — | 700 L, insulated, electric heater - Cold Water Tank | — | — | — | 700 L, insulated, cooled Fgsdpfox Nm Sxex Afped - Water Cooler | — | BL 040 | — | 1.8 kW, cooling & heating function - Fermentation Temperature Controllers (3x) | Cube Plug | — | — | — - Mobile Pump | — | — | — | — - Brewery Accessories | — | — | — | Beer hoses, kegs (30 L & 50 L), misc. parts Optional: Cold Room with Refrigeration Unit | — | — | — | Single-wall, no cooling jacket