Used Chillers for sale (336)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW Cslqveg Ewwrex Tasgt *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, cooling capacity: 270 kW (367.10 HP), type of cooling: water, overall weight: 2,360 kg, The information of the chiller (there are two pieces available): - Bitzer screw compressor CSH 8581-125Y - Water-cooled condenser - Switch cabinet, mounted and wired - The systems were switched off from a running operation and professionally dismantled - Last maintenance May 2020 The cooling capacity per system is 270kW (evaporation 2 Celsius, condensation 40 Celsius, refrigerant R 134a). Celqvx Tevdlimsaegt For further data, please refer to the type plate

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, cooling capacity: 3.6 kW (4.89 HP), air-cooled chiller in mint condition, only used for a short time, 3.6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, bypass, paddle switch and expansion vessel Machine is perfectly suited for smaller cold water supplies for process applications. Compact design, simple control. Celevf Dczeqvx Tajgt

Condition: defective spare-parts repository (used), Year of construction: 2020, Functionality: not functional, machine/vehicle number: 4000105641, Defective - for cannibalization Cjlqju U Apmjvx Taogt Description of the defect on this 4 year old refrigeration machine. Due to a leak in the plate heat exchanger, refrigerant has leaked into the cooling circuit and water into the refrigeration system. This caused the appliance to fail and it was not economical for us to repair it. Otherwise, the appliance and the installed components such as the water pump, control unit and fan (with radial fan suitable for air duct connection) are relatively new and can be repaired or cannibalized

Condition: excellent (used), Offered here is a water cooler generator from the company Lennox. LENNOX chiller 400 V without condenser for indoor installation two cooling circuits capacity: 153 kW R 407 C Cjlog Uv Ayeqvx Taogt low mileage dimensions H x X W x D: 1750 x 1500 x 650 mm For technical data please refer to the nameplate.

You will receive a proper invoice with VAT. The price is incl. VAT.
We have more various interesting things for sale. Please have a look at all our ads.
If you are interested or have any questions, please contact us via the message function!

Condition: excellent (used), Year of construction: 2003, operating hours: 42,785 h, Gea Grasso RC 412 E NH3 compressor Used GEA Grasso RC 412E compressor unit. This NH3 ammonia compressor unit consists of the following components: 1x Schorch electric motor and GEA Grasso oil separator. We offer the NH3 compressor. The compressor, which we recently dismantled, ran perfectly until it was removed. The condition is top ⭐ The machines were dismantled from a large and well operating ice rink because the company decided to change systems. The machines were regularly serviced. Recently, all important parts were replaced. They worked perfectly. Technical data: Cgelsthk Tyeqvx Tajt Manufacturer: Gea Grasso Type number : RC 412 E NH3 Year of manufacture : 2003 P/P: 25 bar n max: 1500 rpm Electric motor Schorch KN7280M-HC81T-Z (75 /160 kW at 730 /1470 rpm) Year of construction : 2003 Oil separator: GEA Grasso 0C 100 TS: 0/170 °C PS:25 bar PT: 41,2 bar Year of construction : 2002 Further technical data can be found on the type plate. Scope of delivery as shown will be delivered like show Please refer to the description and pictures for all relevant article data / information. All information is given to the best of our knowledge and belief, the goods offered are sold as described and inspected. ⭐2 pieces available Price per piece Shipping via a forwarding agent is of course possible for an additional charge. international buyers welcome please ask for shipping costs to europe and overseas

Condition: new, Year of construction: 2024, Functionality: fully functional, overall weight: 90 kg, The cooling machine is for sale from DTE, it has the following dimensions; The coolant is in the device! LxWXH: 681 mm x 477mm x 570 mm Power : 4,9 KW Coolant : R-407C ca 1,1 KG Cjlqvxotn Uvne Tasgt

Condition: excellent (used), Refrigerated Chiller Room Dimensions 3930mm Long x 3600mm Deep Includes refrigerated compressor and all accessories In excellent condition Cgslqvx Tsvw Eg Esaet

Condition: new, Year of construction: 2024, cooling capacity: 68 kW (92.45 HP), type of cooling: air, overall weight: 870 kg, temperature: 7 °C, The FAS series are air-cooled refrigeration systems for industrial use. They are installed outdoors. The equipment of the FAS 096 is as follows: closed internal tank as well as a 3 bar pump and scroll compressors from the manufacturer Bitzer. The refrigerant used is R454B The evaporator is a tube bundle that is installed in the internal tank. Celqvx Tjtw U Dqoaegt Cooling capacity at 12/7°C and 35°C ambient temperature 68kW

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 500293122/230, overall weight: 320 kg, total width: 960 mm, total length: 1,640 mm, total height: 870 mm, nominal voltage: 400 V, Equipment: type plate available, Cryogenic freezer. Concept Deep-freezing is a process step in the hardening of metals that is used in particular for the production of mechanical components such as injection pumps, gear wheels and gear components. This process converts retained austenite into martensite. This ensures that the technical specifications are met and at the same time increases the dimensional stability of each component. The deep-freezing equipment ensures high temperature uniformity thanks to an improved design and optimized nitrogen consumption through the installation of high-quality insulation. The temperature-time profiles for all systems are set to your requirements and can be saved for high reproducibility. Areas of application Deep-freezing is used for hardening metal parts in various industries, for example - Aviation - automotive - Toolmaking - Mechanical engineering Cryogenic treatment is a thermal process that affects the volume of the entire material. It is therefore not just a surface treatment. The materials to be treated are placed in a super-insulated deep-freeze chamber and cooled to -180°C with the aid of nitrogen. HOW EXACTLY DOES THIS PROCESS WORK? The materials are cooled very slowly. At 1 to 2°K/min, we approach the temperature that results from the conversion of liquid nitrogen into gaseous nitrogen (-196°C!). We take great care to ensure that the materials in the chamber do not come into contact with the liquid nitrogen. This prevents thermal shock. The slow cooling process ensures that the entire material is cooled through. Heating is just as slow - at 1 to 2°K/min we bring the instruments to +35°C, i.e. higher than room temperature. This prevents condensation from forming and the materials can be removed from the system after approx. 15 hours. Celqvstudy Hex Tasgt WHAT HAPPENS DURING CRYOGENIC TREATMENT? Similar to stress relief annealing, low-temperature treatment reduces internal material stresses. The structure of the steel is changed and residual austenite is converted into martensite. One can also speak of artificial ageing of the material. Wood also ages during this process and acquires a structure that corresponds to that of 150-year-old (!) wood. The resin deposits are hardened and reduced, creating a cavity that causes the change in sound. There are many physical and chemical processes involved and I will only describe the points that are relevant to musicians here. REDUCTION OF RESIDUAL STRESS IN THE COMPONENT: Cryo treatment causes a reduction of residual stress in the component: cryogenic temperatures (down to -196°C) achieve a complete "molecular" transformation of the partly heterogeneous microstructure in the component to a homogeneous and thus more uniform lattice structure in the alloys.The vibration properties are harmonized and bad overtones are minimized. IMPROVEMENT OF THE SURFACE QUALITY: The carbides created by the deep-freezing process ensure better coefficients of friction and low wear of the metal parts, particularly on the surface. The tensile strength of metals is increased and wear resistance to abrasion is improved.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,180 h, Functionality: fully functional, cooling capacity: 249 kW (338.55 HP), Cooling cap.249 KW (73 refr.tons), 1 circuit with 1 screw Celqvsvfcqqox Tajgt compressors, with VSD drive with Plate evaporator, R 134A Colling down to -10C° water/glycol out. with integr. pump built in Container frame ready for operation

Condition: like new (used), Year of construction: 2024, Air-cooled refrigeration system 273.75kW cooling capacity at 7/12°C and 35°C ambient temperature. Refrigerant R454B GWP 467 A2L GAS. Shell and tube evaporator. Process temperatures down to -12°C. Compact design Cgjlqvou Atw Hsx Taet

Condition: like new (used), Year of construction: 2024, Air-cooled chiller FAS 150 120.5kW cooling capacity at 7/12°C and 35°C ambient temperature. As good as new year 2024 internal pump and tank, refrigerant R454B > 500 GWP A2L GAS process temperatures down to -10°C Cgelqvou Atuljx Taot

Condition: like new (used), Year of construction: 2024, air-cooled chiller FAS 051 as good as new year 2024 35.33kW at 7/12°C and 35°C ambient temperature. Refrigerant R454B GWP less than 500 A2L GAS Cgjlju Attujqvx Tajt Internal pump and tank, scroll compressor. Process temperature down to -10°C brine

Condition: like new (used), Year of construction: 2024, air-cooled chiller CAL 016 BJ 2024 As good as new. 12.96kW at 7/12°C and 35°C ambient temperature. Refrigerant R513A. NON-FLAMMABLE GAS Scroll compressor, internal pump and tank. Process temperatures down to -10°C Cgelqju Ar Nzevx Taet Automatic bypass

Condition: new, Year of construction: 2024, type of cooling: air, Air-cooled chiller as standard incl. internal pump, tank, winter package down to an ambient temperature of -10°C gas sensor and ATEX fan inside the refrigeration system. Cooling capacity 9.57kW at 7/12°C and 35°C ambient temperature. Cgolqst Twtfovx Taet Our propane small series is available from 9.57 up to 66 kW All systems can also be adapted to the process on customer request.

Condition: new, Year of construction: 2024, type of cooling: air, Air-cooled chiller as standard incl. internal pump, tank, winter package down to an ambient temperature of -10°C gas sensor and ATEX fan inside the refrigeration system. Colqvx Tjt Twr Usaogt Cooling capacity 9.57kW at 7/12°C and 35°C ambient temperature. Our propane small series is available from 9.57 up to 66 kW All systems can also be adapted to the process on customer request.

Condition: new, Year of construction: 2024, type of cooling: air, Air-cooled chiller as standard incl. internal pump, tank, winter package down to an ambient temperature of -10°C gas sensor and ATEX fan inside the refrigeration system. Cooling capacity 9.57kW at 7/12°C and 35°C ambient temperature. Celqst Twr Ijvx Tasgt Our propane small series is available from 9.57 up to 66 kW All systems can also be adapted to the process on customer request.

Condition: new, Year of construction: 2024, The FAS series are air-cooled refrigeration systems for industrial use. They are installed outdoors. The equipment of the FAS 064 is as follows: closed internal tank as well as a 3 bar pump and scroll compressors, winter package down to -10°C, The evaporator is a tube bundle installed in the internal tank. The refrigerant used is R454B Cslqvxer D R Ubs Taegt Cooling capacity at 12/7°C and 35°C ambient temperature 49kW

Condition: new, Year of construction: 2024, The Cube CAL series are air-cooled refrigeration systems for industrial use. Colsr D Sansqvx Taegt They are installed outdoors, but can also be installed indoors due to the non-flammable refrigerant R513A. The Cube CAL 013 has an internal tank, an internal P3 pump and a coaxial evaporator. Operation can be guaranteed down to a process temperature of -10°C. Cooling capacity at 7/12°C 35°C ambient temperature 7.9kW

Condition: new, Year of construction: 2024, Chillers from 5 - 600KW with the natural refrigerant propane R290. Cgelqji Ab Hcjvx Tajt We can offer different versions and equipment. From system delivery to turnkey installation. Make a non-binding enquiry or arrange an appointment with our experts who can check and work out the feasibility on site.

Condition: new, Year of construction: 2022, We configure almost all refrigeration systems for them with also with alternative refrigerants . R290 / R32 / R 454B... / etc. in all performance classes . Advise you from the quotation phase to the turnkey implementation. Call us or arrange a free on-site appointment, Germany-wide. Colqvxofqllws Tasgt All machines are built in series production with high quality directly in the factory according to specification . We offer full consultation / commissioning / refrigeration network, piping / service / maintenance repair Germany-wide . The cold water professionals IKG Industriekälte

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled water chillers for industrial use for indoor and outdoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminium fins and self-cleaning coaxial evaporator for maximum reliability. Cooling capacity 13,5 Kw Cgelqjfmd E Sjvx Tajt We have many chillers directly from stock available used and new . contact us for a non-binding offer.

Year of construction: 2022, Condition: as good as new (ex-display), 5 KW Air-cooled chiller for outdoor installation with axial fans. In standard equipment incl. p3 pump. Colqsfqlllsvx Tasgt Technical data on request . The machine is available from stock in Güglingen. We advise you gladly and free of charge for your application . We have constantly changing chillers from stock in all sizes as a demonstration machine or new partly also used . In addition, we partly take refrigeration systems in payment or buy them.

Year of construction: 2023, Condition: as good as new (ex-display), newly arrived air cooled chiller, 3,6KW at Eurovent, coaxial evaporator, 40l tank capacity, internal P3 pump, scroll compressor, machine is perfectly suitable for smaller chilled water supply of process applications. Compact design, simple control. Celqvxofy Rycs Tasgt