Used injection molding machines with a clamping force of 1000 - 4999 kN for sale (512)

Condition: ready for operation (used), Year of construction: 2022, clamping force: 3,430 kN, screw diameter: 60 mm, total height: 2,397 mm, overall weight: 21,000 kg, product length (max.): 8,073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine. • Installed heating power: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 • Interfaces: Euromap 67, Euromap 73Clamping unit: • Distance between tie bars: 810 × 810 mm • Platen dimensions: 1050 × 1050 mm Cgsdpfx Afoydnbpepon • Opening stroke: 700 mm • Mold height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kNInjection unit: • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Holding pressure: 200 MPa • Theoretical injection volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0–350 rpm • Injection stroke: 270 mm • Nozzle contact force: 39.0 kN

Condition: good (used), Year of construction: 2005, clamping force: 2,600 kN, Tiebarless Engel Victory 1800/260 Tech (2005) Clamping force: 260 t Screw diameter: 60 mm Shot weight: 687 g Shot volume: 763 cm3 Platten size: 1100 x 700 mm Mold height: 400 mm Maximum daylight: 2300 mm Dimensions: 6600 x 2035 x 2300 mm, weight: 19,4 t \+ Robot ERC Type: Horizontal Drive: Hydraulic Cgodpowu H A Uefx Afpen

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property Csdpfjyc Ewxsx Afpsgn - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Cgodox Tdwyspfx Afpen Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) Cgsdox Tdp Njpfx Afpsn 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Drive force of moving platen: open: 105 kN close: 95 kN Mounting platen size (H x V): 1,060 x 1,095 mm Clearance between tie bars (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force fwd/return: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating zones: 6 Dry cycle speed: 1,550 1/h Oil capacity: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Codpfoxu Uvasx Afpjgn Shot capacity: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed, standard / optional: rpm 285 / 349 Screw drive power standard or stage 1: 95 PS Screw drive power optional or stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic twin-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5" floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle diameter: 6.00 mm

Condition: used, Year of construction: 2017, operating hours: 17,481 h, functionality: fully functional, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 393 cm³, injection pressure: 1,892 bar, injection weight: 375 g, mold height (min.): 300 mm, ejector force: 33 N, ejector stroke: 150 mm, total length: 5,000 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 8,200 kg, heating capacity: 15.5 kW (21.07 HP), pump power: 2,200 W, type of input current: three-phase, Equipment: documentation/manual, The machine has been regularly maintained, test possible. Cgsdpfexvqnnox Afpen

Condition: ready for operation (used), Year of construction: 2004, clamping force: 1,100 kN, screw diameter: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pads): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Mold installation height, min.: 700 mm • Mold installation height, max.: 1,280 mm • Maximum platen distance: 3,050 mm • Mounting platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie-bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie-bar diameter: 230 mm • Maximum mold weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) – time: 5.2 s Cgedox D Hd Ijpfx Afpen • Dry cycle (Euromap 6) – stroke: 1,100 mmInjection Unit 1 • Screw diameter: 135 mm • Metering stroke: 570 mm • Maximum shot volume: 8,159 cm³ • Maximum screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticizing rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticizing rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased injection pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 • Pump drive power: 130 kW • Oil filling volume: 1,600 lWeight • Net weight (clamping unit / injection unit): 62 t / 18 t

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, clamping force: 4,200 kN, screw diameter: 70 mm, This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. • Witmann included Cgedpfx Asx D Hyvefpon

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES Cgedex Sqi Hjpfx Afpsn ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: like new (used), Year of construction: 2025, KraussMaffei Injection Moulding Machine KM 320-2000 PA CN Cgodsyft Nzjpfx Afpjn Year of manufacture: 2025 Machine equipped with a five-point, double toggle lever clamping unit (three-platen system) with a servo-electric drive. Injection unit with servo-electric drive for injection, plasticizing, and aggregate movement. Control system: MC P1 – industrial computer, real-time Ethernet. Plasticizing system Complete system for thermoplastics. Screw diameter: 70 mm Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 3,200 kN Mold opening force: 480 kN Platen dimensions (H × V): 1,084 × 1,034 mm Tie bar spacing (H × V): 820 × 770 mm Mold opening stroke: 650 mm Mold height (min.–max.): 300–700 mm Daylight: 1,350 mm Ejector stroke: 240 mm Ejector force: 63 kN Ejector speed: 300 mm/s Injection unit Screw diameter: 70 mm L/D ratio: 20.0 Injection pressure: 1,877 bar Shot volume: 1,078 cm³ Shot weight: 981 g Injection speed: 160 mm/s Injection rate: 616 cm³/s Screw speed: 191 rpm Plasticizing rate: 65.9 g/s Nozzle contact force: 57 kN Electrical parameters Connected load: 55.7 kW Installed heater capacity: 29.2 kW Number of heating zones (cylinder): 6 Dry cycle time (EUROMAP 6): 2.39 s / 574 mm Weight and dimensions Net weight incl. control cabinet: 23.2 t Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m Machine in modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system Cgedoxqhfyspfx Afpon LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084

Condition: ready for operation (used), Year of construction: 2006, operating hours: 98,495 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, displacement volume: 74 cm³, injection pressure: 2,500 bar, injection weight: 59 g, mold height (min.): 200 mm, ejector force: 22,600 N, ejector stroke: 100 mm, opening stroke: 600 mm, total length: 3,500 mm, total width: 1,400 mm, total height: 1,910 mm, overall weight: 3,000 kg, heating capacity: 8.12 kW (11.04 HP), pump power: 11,000 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We offer this used KraussMaffei 50-180 CX injection moulding machine, year 2006. KM Model: 50-180 CX International KM size designation: 180 CX/50 Year of manufacture: 2006 Machine serial number: 61009011 Machine weight: 3,000 kg Condition: ready for operation (used) Csdpsyf E Dqefx Afpsgn Pump operating hours: 98,495 Automatic cycle hours: 83,046 Description: Screw diameter: 25 mm Clamping force: 500 kN Shot volume: 74 cm³ Maximum injection pressure: 2,500 bar Shot weight: 59 g Minimum mould height: 200 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 600 mm Tie bar spacing: 370 mm Location ring, injection side: Ø125 mm Location ring, ejector side: Ø125 mm Ejector force (forward/backward): 22.6 kN / 9.9 kN Ejector stroke: 100 mm Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Heating capacity: 8.12 kW Pump motor power: 11 kW Power supply: 400V, 50Hz, standard industrial three-phase connection Equipment: documentation included If you have any additional questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,02,060 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, injection pressure: 2,429 bar, mold height (min.): 300 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,240 mm, total width: 1,510 mm, total height: 2,180 mm, overall weight: 7,800 kg, heating capacity: 10.97 kW (14.92 HP), pump power: 18,500 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We are offering this used KraussMaffei 100-380 CX injection moulding machine, year of manufacture 2006. Injection moulding machine: KM 100-380 CX International size designation: KM 380 CX/100 Year of manufacture: 2006 Serial number: 61009013 Machine weight: 7,800 kg Condition: ready for operation (used) Pump operating hours: 102,060 Automatic mode operating hours: 87,744 Cgjdpfsyf E Amjx Afpjn Specification: Screw diameter: 35 mm Clamping force: 1,000 kN Injection volume: 154 ccm Maximum injection pressure: 2,429 bar Shot weight: 59 ccm Minimum mould height: 300 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 900 mm Distance between tie bars: 420 mm Locating ring, injection side: Ø125 mm Locating ring, ejector side: Ø125 mm Ejector force forward/backward: 22.6/9.9 kN Ejector stroke: 150 mm Machine dimensions (LxWxH): 4,240 x 1,510 x 2,180 mm Machine weight: 7,800 kg Heater capacity: 10.97 kW Pump motor power: 18.5 kW Input supply: 400V, 50Hz standard industrial three-phase Equipment: documentation included If you have any additional questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2004, clamping force: 1,250 kN, screw diameter: 45 mm, displacement volume: 275 cm³, injection pressure: 1,878 bar, injection weight: 250 g, mold height (min.): 300 mm, Krauss Maffei 125-520 C2 General Information Model: 125-520 C2 Year of manufacture: 2004 Control system: MC4 Machine weight: 6,000 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping Unit Clamping force: 125 t Clamping system: 125 / … Platen size: 745 × 770 mm Tie bar spacing: 470 × 470 mm Opening stroke: 600 mm Max. platen distance: 900 mm Mold height: 300 mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit Injection unit: … / 520 Screw diameter: 45 mm Screw L/D ratio: 20 Cgodpfxsyfntue Afpjn Shot volume: 275 ccm Shot weight: 250 g Specific injection pressure: 1,878 bar

Condition: used, Year of construction: 2007, - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009: 6260 x 1555 x 2219 mm (L x W x H), net weight 11,000 kg - Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (excluding pictured handling equipment / temperature control units / material feed [hopper, conveyor]). Designation: SGM Operating hours Cycle counter Csdpfow E N S Tsx Afpogn Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (L x W x H), net weight 7,400 kg. Demag 150: Screw diameter Ø 45 mm

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Cgodsyfnpvjpfx Afpsn Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130t Year of manufacture: 2008 Injection weight: 475.9g Injection unit 1000 Cgodpfeyfnghjx Afpon Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Injection weight: 475.9 g Clamping force: 130 t Tool plate dimensions: 745 x 745 mm Distance between tie bars: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Maximum platen distance: 900 mm Weight: 8000 kg Year of manufacture: 2008 Control system: MC5 Equipment: - Accumulator - Euromap 67 interface - 2 x pneumatic valves - Hydraulic core on moving platen

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,013 h, General Data Machine weight 12200 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Codpfjx Nr Rmsx Afpegn Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 1800 kN This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, General Data Cedsx Nr Ryopfx Afpogn Machine weight 11000 kg Measurements height 2360 mm Dimensions Machine Length 7420 mm Injection Unit Screw diameter 80 mm Clamping Unit Clamping force 4000 kN This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Cjdpfx Afjx Nr Rtspsgn Dimensions Machine Length 5861 mm Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameter: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Cjdpst A Ui Asfx Afpsgn Safety enclosure Rotary table The machine has run nearly 33,107 hours in automatic mode. Current note – Tax advice and advantage for used machines From 01/07/2025, used machines can also be depreciated for tax purposes with a special annual depreciation rate of 30%. In addition to the more favorable price compared to a new machine, you can claim the same depreciation benefits as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Due to recent developments - Tax notice and advantage for used machines From 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year. In addition to the more favorable price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Paragraph 2 German Income Tax Act - draft) Engel E Max cleanroom machine, year 2008, including GEKU SR 500 ST linear robot The machine has operated just under 58,000 pump hours in automatic mode. Csdpfet A Ufwjx Afpogn The machine comes from a well-known pharmaceutical manufacturer, which means both the machine and the handling system were subject to very strict maintenance management and are in excellent condition. We provide a commissioning warranty for every machine purchased from us.

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Cjdpfjyg Hbgjx Afpogn

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total height: 2,190 mm, overall weight: 8,900 kg, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 • Hot runner control units: external • Optional handling available Dimensions Cgodox D H Nqjpfx Afpen Machine Depth 5980 mm