Used Machines with a clamping force of 1000 - 4999 kN for sale (459)

Condition: excellent (used), Year of construction: 2016, Clamping force: 190 t Screw diameter: 40 mm Ejector stroke: 130 mm Cgeln Uibev Rmpzsfet Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Hydraulic Injection material : 30% glass , 70% polyamide Video of

Condition: refurbished (used), Year of construction: 2009, Equipment: documentation/manual, Sumitomo Demag IntElect 160/520-1000 NC 5 Year of manufacture: 2009 Cgolnjwd Afkj Uibfst Control / Programming: NC 5 Screw: 50 mm Injection volume: 442 cc / 393 g Clamping force 1600 kN Tiebar spacing 520 mm x 520 mm Mold height min 275 mm – 585 mm Plate spacing max. 1080 mm Mold opening stroke 495 mm Ejector stroke 120 mm Core pull 2x Plug ejector plate safeguarding Equipment: 2-circuit core pull in series with mold movement (1x fixed platen + 1x movable platen) Ejector parallel to mold movement Clamping force controlled Freely programmable inputs and outputs (4 inputs/4 outputs) (for 5/2-way pneumatic valve) Switch-on/shutdown program (with spraying) Interface for Handling, Euromap 67 (50-pin) Interface for mold protection (ejector plate protection) Integrated hot runner control, 2 zones Mold protection Intruding Plug combination for electrical connection, Change journal, PDE control, graphic MWE1 + MWE2 graphic

Condition: excellent (used), Year of construction: 2015, Wittmann Batenfeld SmartPower Csln Ujwgxt Nsibfjgt 110/525 Unilog B6 Control

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 22200 kg Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW Cgolnsv T D Nwe Uibfjt This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, Freight basis: ex-site Cgsln Uibov S H Rhofot Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net

Condition: excellent (used), Year of construction: 2003, Battenfeld HM 1300/350 YEAR 2003 Wear power 130 TO Scrow 40mm Cgsln Ujdv Tbfsibfot Stroke volume 220 cm Holmen far 52 x 47 Betreibsstunden ca 79800 h

Condition: excellent (used), Year of construction: 2017, Clamping force: 230 t Screw diameter: 50 mm Distance between tie bars V: 620 mm Distance between tie bars H: 620 mm Cjlnev Rmine Uibfogt Type: Horizontal Drive: Hydraulic Machine dimension - L-6,22 m , W-1,73 m , H - 2,30 m Machine weight - 12,6 tons Injection material - 50% glass 50% polyamide

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 Cjln Uiewa S Imjbfjgt - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: excellent (used), Year of construction: 2004, Presse à injection Negri Bossi Cslnev Siz Ae Uibfsgt 1 250 tons Diameter vis 120 Année: 2004 Name of assets: 32,000 Vis et fourreau neufs

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Clamping Unit Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Cjln Usv T D Rboibfogt Application Types Injection Moulding

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, terms of delivery: EXW (ex Works) Csln Ujv S H Rbjibfegt delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2015, operating hours: 31,000 h, ENGEL victory 2050H/650V/350 Combi Year of construction: 2015 Control unit type: Engel CC 300 Cgjlnswc Rxio Uibfjt Operating hours: 31000 h 1st injection unit Screw diameter: 70 mm Max. Stroke volume: 1155 ccm Specific injection pressure: 1480 bar 2nd injection unit Screw diameter: 50 mm Max. Stroke volume: 392 ccm Specific injection pressure: 1280 bar Clamping unit Clamping force: 3500 kN Opening stroke: 1640 mm Mold installation height min. : 550 mm Max. platen distance: 1650 mm Clamping platens: 1200 x 1100 mm Accessories: Robot Viper 40 RC 300 Core pull ejector side 2 x Core puller nozzle side 2 x Air core pull 2 x Mold heating 24 x Cascade control 8 compartments Robot Engel Viper 40 RC 300 Z - axis : 3320 mm X - axis : 1200 mm Y - axis : 1500 mm B - axis : Servo + 90° - 180 ° C - axis : air 0 - 90°

Condition: excellent (used), Year of construction: 2015, ZHAFIR ZE 1900/430 (2015) ZERES, low hours Clamping force: 190 t Screw diameter: 40 mm Shot weight: 194 g Cgeln Uiovx Uhbsbfjt Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Min mould height: 200mm Max mould height: 550 mm Shot volume: 213 cm3 Type: Horizontal Drive: Hybrid

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Ejector force: 61 kN Centring of moving platen D: 160 mm Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Coljwa S Dzsn Uibfogt Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg

Condition: like new (used), Year of construction: 2009, operating hours: 49,500 h, Functionality: fully functional, machine/vehicle number: 172007, clamping force: 100 kN, screw diameter: 35 mm, Machine from clean room production. Celnowcki Is Uibfogt

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1560 mm Measurements depth 5980 mm Measurements height 2190 mm Machine weight 8900 kg Clamping Unit Clamping force 1900 kN Additional Equipment Cgeln Uibov Rr Ntsfet Air valves: 2 This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2017, operating hours: 30,000 h, clamping force: 300 kN, screw diameter: 55 mm, displacement volume: 511 cm³, injection pressure: 1,620 bar, overall weight: 17,000 kg, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Cjlnjv R Hlpj Uibfjgt

Condition: excellent (used), Year of construction: 2014, Arburg 570A 2000-1300 ALLDRIVE (2014) electric Clamping force: 200 t Screw diameter: 60 mm Shot weight: 620 g Coln Uovydypjibfsgt Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 678 cm3 Type: Horizontal Drive: Electric

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Cjljwa Sx Ejn Uibfsgt Closing elements: Closing force: 100 t Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Dimensions: Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m

Condition: excellent (used), Year of construction: 2010, Arburg 1500T - 1600-400 (rotary) Cgoln Uov Nag Doibfet Table diameter: 1500 mm Clamping force: 160T Mould height min. mm : 400 mm Screw dia: 40 mm Shot weight : 184g/PS

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Celn Uibewa Svkefjgt Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2017, Clamping force: 100 t / increased to 125 ton Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Cgjlov I Ukhjn Uibfot Drive: Hydraulic Machine is electric immediately available

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 450 - 3500 C3 Sprinter injection machine Year of manufacture - 2008 Fully hydraulic two-platen clamping system. MC 4 control system with color monitor, integrated control panel, and built-in disk station Plasticizing system Complete HPS-UN plasticizing system for thermoplastics with a screw diameter of 90 mm. TECHNICAL DATA Closing unit - Closing force of mold: kN 4500 - Opening force of mold: kN 280 Cgsln Uisq Nlzhobfet - Moving force of the moving plate fixing the mold - -. -- opening: kN 137 -- closing: kN 116 - Dimensions of clamping plate (h x v): mm 1270 x 1200 - Clearance between columns (h x v): mm 900 x 800 - Opening path of the mold: mm 1170 - Installation height of the mold: mm 480 - Opening width: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95/48 Injection unit - Auger diameter: mm 90 Auger drive by electric motor with increasing drive force. For independent and energy-saving plasticization for opening and closing - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection weight for PS: g 1777 - Screw speed, standard, optional: rpm 149/247 - Injection capacity cm3/s 3817 - Injection capacity at: -- standard screw speed: g/s 103 -- increased screw speed: g/s 152 Electric-hydraulic equipment - Rated power of pump motor: kW 90 - Drive power of auger (electr.) kW 88 - Installed power of heaters: kW 59 - Number of cylinder heating zones: - 9 - Dry cycle time according to Euromap: 1/h 1400 - Oil tank capacity: l 1075 Weight and dimensions - Net weight with control cabinet: t 26.3 - Dimensions of foundation space (L x W x H): m 7.98 x 2.35 x 2.51

Condition: ready for operation (used), Year of construction: 2012, Haitian Mars 4700/2250 injection molding machine Year of production -2012 Wittmann W 832-2012 robot X axis -900 mm Y axis -1600 mm Z axis -3000 mm Closing system: Clearance between columns - 800/820 mm Min/max mold height -320/780 mm Opening stroke - 1560 mm Injection system: Closing force - 4700 kN Injection pressure - 2110 bar Screw diameter - 65 mm Injection volume - 1068 ccm Injection weight -972 g Equipment: 2x core - moving plate Colnewa Dr De Uibfjgt

Condition: excellent (used), Year of construction: 2003, Netstal SynErgy 1500-600 injection moulding machine - year of manufacture 2003 - maximum short-circuit force 1500kN - injection unit 600 - screw diameter 50mm - injection volume 353 ccm - injection weight 339 g - injection pressure 1890 bar Coln Uibom Sgrzsfsgt - hydraulic ejector on moving platen - hydraulic core on movable disc - hydraulic core on fixed plate - two air valves - mould height 250-550mm - mould opening stroke 0-450mm - distance between columns 460 X 460 mm - machine weight 11 200 kg