Used injection molding machines with a clamping force of 1000 - 4999 kN for sale (511)

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Lsdpfx Agozrwgcj Aeaf Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Laedpfx Ajzrwfrsg Ajf Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Price: on request contact: Mr. Ralf Schulz Lasdpfjzrwffex Ag Aof

Condition: used, Year of construction: 2001, Clamping force: approx. 200 t Components: 1 Mold mounting height: approx. 310 / 760 mm Laodpezl S U Iefx Ag Aof Opening stroke: approx. 320 / 575 mm Tie bar distance: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm L/D ratio: 1 / 20 Core pull: 4 Hot runner zones: 12 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 186 A Current 2: 102 A Current 3: 84 A Current 4: 67 A Weight: approx. 10.1 t

Condition: used, Year of construction: 2001, Operating hours: 73075023 Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 320 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Hot runner zones: 20 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 214 A Current 2: 105 A Current 3: 109 A Current 4: 67 A Lajdpfx Aezl S N Ejg Aef Weight: approx. 10.8 t

Condition: used, Year of construction: 2001, Clamping force: approx. 420 t Components: 2 Mold mounting height: approx. 651 / 1100 mm Opening stroke: approx. 400 / 880 mm Tie bar spacing: approx. 900 × 800 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 4 Special equipment: Needle gate Hot runner zones: 36 Flow rate: approx. 243 l/min Ledpfszl S Nlex Ag Ajaf Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 156.5 A Current 2: 169 A Current 3: 100 A Weight: approx. 17.7 t

Condition: used, Year of construction: 2003, Operating hours: 61303927 Clamping force: approx. 200 t Number of components: 1 Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Ljdpfszl S Hdsx Ag Aoaf Current 1: 189 A Current 2: 152 A Current 3: 37 A Weight: approx. 10.1 t

Condition: excellent (used), TEDERIC DT400 injection molding machine with FCW05-1000P robot Manufacturer: TEDERIC Model: DT400 Year of manufacture: 2021 Serial number: T04000648 Robot: FCW05-1000P Robot year of manufacture: 2019 Technical data Clamping force: 4,000 kN Screw diameter: 70 mm Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 730 × 730 mm Minimum mold height: 280 mm Maximum mold height: 750 mm Maximum platen distance: 1,500 mm Ljdszii Adjpfx Ag Asaf Injection volume: 1,347 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 40 kW Heater power: 33 kW Screw diameter: 70 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 21,518 h Automatic operating time: 8,912 h FCW05-1000P robot (2019) included.

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Robot year of manufacture: 2018 Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Lsdpszii Efofx Ag Ajaf Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included.

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Clamping unit Clamping force: 3500 kN Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Maximum ejector stroke: 200 mm Ledpfxsziukge Ag Asaf Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Laedpfx Agsxak Uco Asf Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 Ljdpfswa Svkjx Ag Aeaf - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds Lodexzklqopfx Ag Aeaf - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: excellent (used), TEDERIC DT500 injection molding machine with RB200CN robot Manufacturer: TEDERIC Model: DT500 Year of manufacture: 2021 Serial number: T05000654 Robot: RB200CN Robot year of manufacture: 2015 Technical data Clamping force: 5,000 kN Screw diameter: 80 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 820 × 820 mm Minimum mold height: 320 mm Maximum mold height: 800 mm Maximum plate spacing: 1,650 mm Injection volume: 2,031 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 68 kW Heater power: 46 kW Screw diameter: 80 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Operating hours: 17,437 h Automatic operating time: 4,009 h Laedpfezii D Uex Ag Asf RB200CN robot (2015) included.

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Lajdpfx Aex Thzpeg Aof Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Laedpfxezc Efco Ag Ajf Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Condition: excellent (used), Tederic D680 Injection Molding Machine Model: D680 Year of manufacture: 2019 Robot: SW7315DS Robot year of manufacture: 2019 Technical data Parameter Value Clamping force 6,800 kN (680 tons) Column spacing 1010 × 1010 mm Diameter of centering ring (injection side) 250 mm Diameter of centering ring (ejector side) None Minimum mold height 450 mm Maximum mold height 1100 mm Distance between platens 2250 mm Laodpfx Aozilfbog Asf Maximum opening stroke 1800 mm Injection volume 2531 cm³ Hydraulic ejector Yes Number of hydraulic circuits 3 Core pulling capability Yes Short cooling circuit Yes Euromap / robot preparation Yes Screw diameter 85 mm Ejector stroke 300 mm Screw type Standard Motor power 53 kW Heater power 37 kW Equipment • SW7315DS linear robot • Hydraulic ejector • 3 hydraulic circuits • Euromap interface • Automation preparation • Short cooling circuit Operating history • Machine year of manufacture: 2019 • Total operating time: 31,272.6 h • Operating time in automatic mode: 9,990.2 h

Condition: excellent (used), Battenfeld TM Xpress 350/2250 injection molding machine Control system: B6P Year of manufacture: 2014 Operating hours: 47,000 hours Lasdpoziulwjfx Ag Asf We offer a Battenfeld TM Xpress 350/2250 injection molding machine in very good technical condition. The machine is regularly serviced, fully functional, and ready for immediate operation. Technical specifications Clamping unit Clamping force: 3500 kN (350 t) Platen dimensions: 1030 × 1140 mm Distance between columns: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum opening: 1380 mm Centering ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection shot weight (PS): 1078 g Maximum injection pressure: 2070 bar Maximum injection speed: 600 mm/s Equipment 4 × pneumatic valve 1 × hydraulic core Dimensions and weight Length: approx. 6.9 m Width: approx. 1.9 m Height: approx. 2.4 m Weight: approx. 13,000 kg

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Laedpjxyqw Rsfx Ag Aef Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Ljdpex Avhysfx Ag Aeaf Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: good (used), Year of construction: 2001, Battenfeld TM 4500/2800 injection molding machine Year of production: 2001 Control: Unilog B4 4 identical machines available Closing system: Lasdpfx Asvn Sa Teg Aof Closing force: 4500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing: 800 x 800 mm Mounting plate dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 75 mm Shot weight (PS): 1506 g Injection volume: 1657 cm³ Specific injection pressure: 1739 bar Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20400 kg Oil tank capacity: 800 liters

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Lasdeyv E Nvjpfx Ag Aof Type: hydraulic injection moulding machine Control: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Platen movement force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticizing System: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is an excellent candidate for ESS retrofitting (energy savings of up to 30–60%) 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Lsdpfow U Rcdex Ag Ajaf Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 350–2700 C2+ injection molding machine Year of manufacture: 2004 Control system: MC4 Technical data Clamping unit * Clamping force: 3500 kN (350 tons) * Platen dimensions: 1060 × 1095 mm * Tie bar spacing: 710 × 710 mm * Opening stroke: 920 mm * Maximum opening: 1300 mm * Minimum mold height: 380 mm * Ejector stroke: 250 mm * Ejector force: 95 / 48 kN Injection unit * Screw diameter: 80 mm * Injection pressure: 1829 bar * Injection volume: 1433 cm³ * Injection shot weight (PS): 1304 g * Screw speed: 218 / 284 rpm * Maximum injection capacity: 1508 cm³/s Plasticizing system * Version for thermoplastic materials * Abrasion protection * Check valve * Open nozzle Drive system Lsdpfxezkadbo Ag Asaf * Pump motor power: 75 kW * Heater power: 36 kW * Number of heating zones: 7 * Oil tank capacity: 720 l * Dry cycle time (Euromap): 1550 cycles/h Dimensions and weight * Dimensions (L × W × H): 6910 × 2040 × 2410 mm * Machine weight: 16.7 t Additional information * MC4 control system with color monitor * Machine prepared for modernization with the ESS system (energy saving of 30–60%)

Condition: excellent (used), Year of construction: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: Open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen size (H x V): 1270 × 1230 mm Tie bar clearance (H x V): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw rotation speed: 285 rpm Plasticizing rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater capacity: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with an ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to the actual demand during the production cycle. Ledeyugkwepfx Ag Ajaf Key Benefits: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven industrial technology - Reduction of energy losses during idle runs - Lower heating of hydraulic system - Extended life of hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines