Condition: used, Year of construction: 2022, machine/vehicle number: 747.250, Neue Ausstellungsmaschine! Listenpreis: 13.610,- 400V, 3Ph, 50Hz / 1,5 kW komplett in Standardausführung mit: Vollautomatische Elektroniksteuerung mit Impulsbetrieb über Fußventil Spannen-Bohren-Entspannen, elektrischer Aussetzbetrieb. Automatischer Rücklauf der Bohreinheit nach Erreichen der eingestellten Bohrtiefe. Automatische Bohrlochtiefenverlängerung beim stirnseitigen Bohren. Dies erspart die Umstellung der Bohrlochtiefe von flachseitigen auf stirnseitigen Bohrungen (+ 10 mm z. B. bei Dübellänge 35 mm, Bohrtiefe Flachseite 14 mm und Bohrtiefe Stirnseite 24mm). 1 Bohrbalken mit 21 Spindeln, Teilung 32 mm, Motor 1,5 kW (Bohrvorschub 0-70 mm). inkl. 21 Stk. Schnellwechselfutter (System Ganner) zum einfachen Wechseln der Bohrer. Einfaches Schwenken der Bohreinheit von 0° auf 90°, unterstützt durch Gaszylinder. 1 Spannerträger verschiebbar in Y-Achse mit 3 pneumatische Spannzylinder, für Werkstückhöhe bis max. 80 mm. Ideales Anschlagsystem bestehend aus: 1 Anschlaglineal 1800 mm zum Bohren von Zwischenböden, (Aluprofil 40x40 mm) mit 3 Einfallanschlägen, mit Schnellwechselsystem, einfach umsteckbar von rechte auf linke Anschlagseite zum spiegelbildlichen Bohren von Zwischenböden in Korpuskonstruktionen, auch einsetzbar für Lochreihenbohrungen im System 32. Seitenanschläge und Position-Einstellungen, sowie der Position der Bohrhöhe über Auflagetisch mittels mechanische Digital-Zählwerke. Seitenanschläge können einfach abgeschwenkt werden, für kürzeste Umrüstung von Korpus- auf Rahmen- und Lochreihenbohrungen. Spannarme für Spannerträger ausgeführt für Lochreihenposition bis max. 300 mm. Ideales dreistufiges Werkzeugsystem. 1 Satz Bohrer zum Dübeln: 5 HM-Dübelbohrer, Ø 8x77 mm, rechts 4 HM-Dübelbohrer, Ø 8x77 mm, links Zusatzausstattungen: Absaugtrichter, staubgeprüft, Ø 120 mm Set für Reihenbohren im System 32 komplett mit: 2 Führungen mit Skala und Adapter für Position max. 300 mm, 2 Paar Anschlagsnocken für Reihenbohrungen für Y-Position 37 mm und z.B. 300 mm, 1 Basislineal 1000 mm (Aluprofil 40x40 mm), 1 Einstellehre für Reihenbohrungen 1 Satz Bohrer:11 HM-Lochreihenbohrer, Ø 5x57 mm, re,10 HM-Lochreihenbohrer, Ø 5x57 mm, li Hydraulischer Bremszylinder Spannzylinder mit Halterung, zusätzlich Cgjb Hsqw Ek Ijlyu Djt

Year of construction: 1986, Condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head - Hold down: 2 from above Ceb Hlye Drmxsu Degt - pressure cylinder: 1 from the side - control: Siemens of newer construction

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: A 0204/6707, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 600 mm, TECHNICAL DETAILS Workpiece length: 120 - 2,500 mm Workpiece width: 50 - 600 mm Workpiece thickness: 12 - 40 mm Control: KOCH Numeric with Windows 2000 Sawing station Sawing station part length: up to 560 mm Saw guide: in measuring rail Measuring stop: tear-free cuts Thickness measurement: bar encoder Separate Z-adjustment: for manual and machine operation Frequency converter: for saw motor Saw blade take-off: available Horizontal drilling station Drilling spindles: 5 spindles per side Dowel tool: 1 x type 3B for dowels 10 x 40 mm Dowel spacing: 7-14 mm Electronic glue monitoring: KOCH ELC Vertical drilling station Empty station: between horizontal and vertical processing Top support: 1 x with 2 guide tracks Vertical drilling support: 1 piece, NC in X + 2 x Y + Z Vertical drilling support: 2 separately adjustable drilling spindles in Y Drilling head: 28 drilling spindles (14 spindles each for X and Y) Suction and clamping shoes: 2 pieces Horizontal drilling spindles: 2 pieces for longitudinal drilling on the front and rear side Grooving head: 0°/90° swiveling Carrier: with linear guides for center support Workpiece center support: (automatically lowerable) with NC adjustment in X Workpiece support Workpiece stop: for processing strips Workpiece width: max. 140 mm Clamping of strips: via back gauge MACHINE DETAILS Height: 2,300 mm Length: 5,600 mm Width: 6,000 mm Csb Hlyovcm Uuou Djgt Basic equipment - NC width adjustment - 1 support with NC axis in Y on each side - 1 horizontal drilling station with 1 drilling spindle per side - 1 doweling tool with ELC glue monitoring per side - 1 vibratory conveyor with control mirror per side - Central axis with 1:1 glue pump - 2 NC height adjusters (Z-axis) - Belt infeed with NC-adjustable belt pulley - Workpiece transport with toothed belt and spring-loaded cams - Central lubrication - Telephone modem for remote diagnosis

Condition: good (used), A hole row drilling machine from Knoevenagel is offered here. Cgjb Hlyuod Sdurs Djt Data: Table size: 58 x 43 cm (with a scale of 0-50 cm) The table is height-adjustable and tiltable VGC 18809 420 V 4.0A 15 spindles All further information as well as the condition can be found in the pictures.

Year of construction: 1991, Condition: used, machine/vehicle number: 9105/4452, Double end automatic operation, for straight, right-angled workpieces Stock dimensions Cebjit T H Ss Hlyu Degt Stock length 220 - 2500 mm Stock width 15 - 200 mm Stock thickness 15 - 50 mm Double-sided trim saw: The saws are cutting downwards through the clamped workpiece.Each side 1 sawing unit. Horizontal drilling station: each side 1 drilling unit with 1 drilling motor 2 kW Distribution of vertical drilling units: 3 units at the front of the overhead beam 2 units at the back of the overhead beam Workpiece centre support: With stop and back stop Edge drilling unit: Each Side 1 support with height adjustment Distance from edge max 250 mm.

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Types:801 Machine nr:112884 Stop 2,29 Kw Stop and feed Ceb Hlyjubxzreu Degt

Condition: used, Year of construction: 2017, machine/vehicle number: 624.722, Anzahl Bohrspindeln : 21 Stk Teilung : 32 mm Bohreraufnahme : Spannfläche Bohrerschaft: 10 mm Bedienung : Fußpedal Cgebeihghro Hlyu Dst Werkzeuge : Ja mm Bohrrichtung : von unten & stirnseitig Schwenkung : von Hand Schwenkwinkel : nur 0° oder 90° Grad max. Durchlasshöhe : 80 mm max. Durchlaßbreite : 750 mm Anzahl Materialspanner : 3 Stk Art der Materialspannung : pneumatisch Ausführung : stationär Anschlagsystem : nur für Konstruktionsreihe Gewicht ca. : 400 kg Motorleistung : 1,5 kW Absaugdurchmesser : 120 mm

Year of construction: 1992, Condition: good (used), - Drill head: 21 spindles - Glue guns: 6 Cgjb Hljrcfieyu Djt

Condition: good (used), Year of construction: 1990, Brandt dowel boring machine Type: DB 25 P 25 drilling spindles in 32 mm pitch Drill beam pneumatically swiveling Drill beam positions bottom/rear Locking at 45° / >45° possible with clamping shoe Clamping height up to 120 mm possible Drilling height above table up to 50 mm Motor power 1.5 kW Drilling depths 0 - 95 mm Table height 905 mm Spindle speed 2800 rpm Csbeua Au Hj Hlyu Djgt Drill shank diameter 10 mm 2 stops and 3 hold-down devices IMMEDIATELY AVAILABLE

Year of construction: 2003, Condition: good (used), machine/vehicle number: 02070325, Automatic dowel drilling machine 2 horizontal drilling groups Csbskn Ibuj Hlyu Degt 3 vertical drilling groups from top Sidemovement of vertical drilling groups from top Vertical infeed magazine Returnbelt to operator

Year of construction: 1998, Condition: used, machine/vehicle number: 9803/5823, The second-hand drilling and dowel insertion machine is equipped with 2 separate working fields. One workpiece can be processed while the next piece is loaded. The boring and dowel driving pattern is processed on point-to-point-basis. Cgob Hogkwqqolyu Det Dowel diameter: 8 x 30 mm Stock length: min. 90 mm Stock width: up to 2x 1,100 mm Stock thickness: 14-40 mm EQUIPEMNT 1 x horizontal drilling station 1 x glue injecting and dowel insertion station type 34 Electronic Glue Control ELC 1 x vibrator hopper convejor 1 x glue pump 1:1 Central lubrication Workpiece support table 1,250 mm 4 x stock clamping system for horizontal and vertical drilling Vertical drilling: Workpiece in upright positiont Stock length: min. 320 mm Stock width: max. 600 mm Stock thickness: 10-36 mm 1 center stop with 2 sensors removeable for both workpieces 2 x workpiece support 550 mm deep (Y) retractable right and left NC-positioning of height adjustment of the drilling and dowel insertion station (Z-axis) Electric supply 400 V, 50 Hzs, 3 phases KOCH Numeric with 1 NC-axis (X)

Condition: used, Automatic throughfeed drilling machine with automatic workpiece transport for throughfeed of the workpieces Cgeb Hloqy D T Tjyu Dot Left machine side fixed, right side adjustable over the entire machine length Price € 3,900 in untested as-is condition, freely loaded onto truck >> the MERCEDES among the automatic drilling machines with the highest quality Made in Swabia

Condition: like new (used), Functionality: fully functional, Electronically controlled dowel hole drilling and driving machine BS 5102-V Condition: As good as new, newly painted, 1 year warranty. The BS 5102-V is the ideal machine for all face drilling. It can either drill or drive in dowels, but develops its full performance when both are done at the same time. The amount of glue can be precisely dosed via the PLC control, which ensures maximum flexibility and minimum set-up times. Equipment: Controlled X-axis with machine stand as workpiece support. X-support via linear guide and rack and pinion drive with servo motor. Including drilling motor, gluing device and dowel insertion device. Drilling depth and dowel projection can be adjusted directly on the drilling support. Safe workpiece clamping mechanism with a clamping portal, equipped with 4 adjustable clamping cylinders that press the workpiece precisely against the stop edge. Clamping cylinders can be controlled alternatively or together in two groups. Stop rulers are mounted on the left, right and center of the machine table to increase the workpiece support surface. Control system: PC with Siemens PLC control and dialog-oriented programming via WP-Studio. Windows 10 operating system with graphical support on a 17" color screen. Separate workpiece programs for left and right control panel, which can be automatically mirrored. Glue quantity specifications can be stored in each program. Technical data: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: min. 15 mm / max. 60 mm Vertical stroke of the support: 7.5 - 50 mm Min. lateral drilling distance: 10 mm Cob Hounvg Tslyu Degt Clamping cylinder: 4 short-stroke cylinders (63 mm Ø, inclined clamping) Drilling unit: 9,000 - 18,000 rpm, adjustable, 1.5 kW Drilling depth: max. 45 mm Drill holder: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min. Dowel dimensions: 8 x 30/50 standard, according to DIN 68150, form A Spiral feed capacity: 3.5 ltr. Glue system: 1:1 diaphragm pump, max. 7 bar Suction connection: 80 mm Ø, required suction air volume: 540 m³/h at 30 m/sec. Voltage: 400 V, 50 Hz options: Y-axis for automatic adjustment of the drilling and gluing unit. Electronic glue monitoring, which ensures that glue flows during the process. Additional drill motor for surface-side drilling. Technical data for surface-side drilling motor: Drill motor: 1.5 kW at 18,000 rpm, 1-spindle Speed: 9,000 - 18,000 rpm adjustable Drill feed: pneumatic Drilling stroke: max. 25 mm Drilling depth limitation: via spindle and siko display Distance to reference edge: min. 5 - max. 35 mm Drill holder: M10 external, max. diameter 35 mm Workpiece length: min. 70/90 mm (part width) This machine combines state-of-the-art technology with easy handling and high power reserves, ideal for demanding woodworking applications.

Condition: new, - Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar. Cgeb Hlsguak Aoyu Dst - Length (mm): approx. 7520 - Width (mm): approx. 770

Condition: good (used), Provisional specification In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Cgebjtu Hkwo Hlyu Dot Adjustable depth stroke to heads 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control.

Condition: excellent (used), Year of construction: 2007, WEEKE BHX 500 - year 2007 - immediately available - Workpiece length 200 - 2500 mm - Workpiece width 70 - 1000 mm Csb Heva Nyholyu Dsgt - Workpiece thickness 4 - 80 mm

Condition: new, Semi-automatic drill - Precise lifting frame for accurate drilling results and hard requirements - stepless drilling stroke adjustment with automatic return stroke via limit switch - Two-hand safety control - Horizontal and vertical workpiece clamping via foot switch - Automatic or manual operation - Position-accurate adjustment in the Y-axis - Support table right/left with scale and folding stops Ceb Hled Rhy Deyu Djgt We will be happy to provide you with an offer tailored to your requirements.

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Dowel drilling machine Cgsbjuf Dmuj Hlyu Dst Make Vitap Type Forma 63 H year 2000 with 3 units 2x bottom 1 x lateral with 21 spindles Pneumatic

Condition: new, bore capacity in steel (diameter) 20 mm throat 195 mm Cgob Hlysiiq S Nsu Dst bore stroke 80 mm boring spindle MK 2 table surface area 320 x 300 mm total power requirement 0,75 kW weight of the machine ca. 0,072 t dimensions of the machine ca. 0,7 x 0,4 x 1,1 m

Year of construction: 1980, Condition: used, - Manufacturer Prieß and Horstmann - Type BAT II - working length (mm): 1800 - drilling units: 2 with 3 drills each - press-in device: for pot-hole hinges - Drilling units: 2 for hinges etc. Cgob Ho Nh E Islyu Djt

Condition: new, Year of construction: 2023, machine/vehicle number: MR005217, Unique 3-axis controlled machine for horizontal and vertical drilling in on sheet metal and solid wood for furniture and interior construction. Machine easy to set via touch screen display, programs easy to call up.Machine is equipped with the following options: - Reference pin for row drilling - Additional pneumatic clamping units - Reference tool for setting clap stops Technical specifications: - Maximum panel thickness : 60 mm - Number of drilling spindles total : 21 pieces - Number of drilling spindles counterclockwise : 10 piece - Number of drilling spindles clockwise : 11 pieces - Spacing between drilling spindles : 32 mm Cjb Hlyujugu U So Dogt - Total distance first and last spindle : 640 mm - Maximum drilling diameter : 40 mm - Maximum drilling depth : 65 mm - Maximum drilling height : 55 mm - Engine power : 2 hp - Serial number : 1622300606

Condition: new, Multi-spindle groin drilling machine Number of drilling spindles, clamping devices, etc. depending on customer requirements Cgob Hlyed Rhx Seu Dot spindles can be controlled individually at your speed. We will be happy to provide you with an offer tailored to your requirements.

Year of construction: 1991, Condition: good (used), - Working width (mm): 900 - number of drilling spindles: 27 - pitch (mm): 32 - drilling unit: swivelling Cgob Hog Um Ekolyu Djt - motor power (kW): 1,9 - Required space L x W x H (mm): 1120 x 900 x 1150 - weight (kg): 550

Condition: new, Year of construction: 2023, machine/vehicle number: MR005216, Machine for horizontal and vertical drilling in on sheet metal and solid wood for furniture and interior construction. High quality machine, can be equipped with various options, stops, etc. for optimal use of the machine. Machine is equipped with the following options: - Reference pin for row drilling - Additional pneumatic clamping units - Reference tool for setting the clamping stops Technical specifications: - Maximum panel thickness : 60 mm - Number of drilling spindles total : 21 pieces - Number of drilling spindles counterclockwise : 10 piece - Number of drilling spindles clockwise : 11 pieces - Spacing between drilling spindles : 32 mm - Total distance first and last spindle : 640 mm - Maximum drilling diameter : 40 mm - Maximum drilling depth : 65 mm - Maximum drilling height : 55 mm Csb Hlyusugu U Eo Dsgt - Engine power : 2 hp - Serial number : 1622300688

Condition: used, Year of construction: 2002, machine/vehicle number: MR003274, Neat long hole drilling machine, fabr. SAC - machine is ready for immediate use. Technical specifications: - No load speed : 2900 /min - Chuck span : 1-20 mm - Table length : 500 mm - Table width : 300 mm - Serial number : CS431 Cjb Hlstq Egfeyu Dogt - Motor power (kW) : 1.1 kW