Used Foundry for sale (85)

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Hfsdpfoh Ad Sajx Ad Ued Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Hsdpfjuxmt Tox Ad Uefd Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 Hfedpfx Ajvampgsd Usd - KF Arc Furnace_AC EAF 8 ton, 4 MW - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t - Power transformer 4 MW Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: good (used), Vacuum Casting / RIM Inventory: Complete foundry section including vacuum casting systems (service partner available), drying ovens, and more (Foundry Inventory System V001AD17112025): - 1x Memmert Universal and Drying Oven UF750plus, large (S6) - 1x Memmert Universal and Drying Oven UF750plus, large (S7) - 1x Memmert Universal and Drying Oven ULP700, medium (S8) - 1x Memmert Universal and Drying Oven UE500, small (S5) - 1x MCP/HEK Vacuum Casting System, large, with 1x Schüchl differential pressure unit (S3+S4) - 1x UNIPRE M10 RIM Metering and Mixing Unit, year of manufacture 1997 (S9) - 1x Tartler RIM System, type MDM6, year of manufacture 2014 (S10) - 1x Tartler Silicone Metering and Mixing Unit, Tardosil 200, year of manufacture 1999 (S12) - 1x Schüchl Vacuum Casting System UHG-400, year of manufacture 1998, small (S1) - 1x MCP/HEK Vacuum Casting System Type C001, year of manufacture 1995, medium (S2) - 1x MCP/HEK Vacuum Casting System Type 004 PLC, year of manufacture 2000, large (S3) Accessories: - 1x Ziegler 631.5 81 transport trolley / pallet truck, year of manufacture 1997 (S11) - 1x Pfaff Type 4600011 pallet truck, year of manufacture 2000, small, 0/71/27663-0015 (S14) - 1x Pfaff Type 4600011 pallet truck, year of manufacture 2000, small, 0/71/3199-0029 (S15) - 1x Jungheinrich TF30 pallet truck, small, year of manufacture 2011F, SN: 56102106/033T (S16) - 1x Kern scale, large, FCB 6KO.5, SN: WD170053528 (S17) - 1x Kern scale, small, SN: WC0782681 (S18) - 1x suction funnel incl. motor (S19) Hfsdpfxoyrgy Ho Ad Ujd - 2 steel cabinets (S20) - 1x ESTA extraction arm (S13) - 3 workbenches with stainless steel surfaces - 2 workshop chairs, 1 step ladder, various small tools.

Condition: good (used), Year of construction: 2012, Industrial Robot Manufacturer: Kuka Model: KR16-2-F Foundry Year of manufacture: 2012 Operating hours: approx. 11,000 hours Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka Controller KRC2ed05 Year of manufacture: 2009 Weight: 207 kg Processor: 2GHz Hsdpfetukiqsx Ad Uofd Operating system: WinXP Software version: V5.6.11 Kuka Teach Pendant KCP2ed05 Kuka connection cables 7m/15m

Condition: good (used), Year of construction: 2006, Industrial robot Manufacturer: Kuka Model: KR360L240-2 F Foundry Year of manufacture: 2006 Reach: 3326 mm Load capacity: 240 kg Weight: 2375 kg Kuka controller KRC2ed05 Hedpfjr H H Diox Ad Ujfd Year of manufacture: 2006 Weight: 208 kg Software version: V5.6.11 Operating system: WinXP Kuka teach pendant KCP2ed05 Kuka connection cables

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - KUKA wrist new adjustment - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible Hfodpogz Tcisfx Ad Usd On stock more than 100 central hands on stock, various models. Ask a question! Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 Hsdpfx Aoymwxpsd Usfd - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 Hfedpfx Adsymww So Ujd - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: used, Year of construction: 2012, ABB Robotics IRB 2600 20/1.65 Foundry Plus robot with IRC5 M2004 controller Hfsdoyil R Nspfx Ad Usd Number of axes: 6 Max. payload: 20 kg Max. working envelope: 1650 mm Year of manufacture: 2012 Scope of delivery: robot arm, control cabinet, teach pendant, connection cables 2-week commissioning guarantee. No further warranty provided. Spare parts are continuously available from stock. The robot is fully functional and can be inspected at any time.

Condition: used, Year of construction: 2003, Robot ABB Robotics IRB6650 Foundry 200/2.75 S4C+ M2000, Profibus Hedpfeyilu Uex Ad Uofd Controller: S4C+ M2000 Number of axes: 6 Max. payload: 200 kg Max. working range: 2750 mm Year of manufacture: 2003 Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Floppy drive for data backup. 2 weeks commissioning warranty. No further warranty.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Hfjdpjq A Uiusfx Ad Ujd Model: KR16 Standard & Foundry ( more option is also available ) Condition: Used & Tested Year: 2008 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Hedpfsvz Aprox Ad Usfd Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein YXLON X-ray system Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Condition: used, functionality: fully functional, Metal part washing machine with part dryer Hfsdpjxvq Uzjfx Ad Usd

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hodpfx Adelxnlfo Uofd Hydraulic tilting Water cooling system

Condition: used, Year of construction: 2001, Foundry Manipulator CLANSMAN DYNAMICS Year of construction: 2001 Max capacity: 250 KG Hedpfjxxylzsx Ad Uofd

Condition: like new (used), Year of construction: 2019, functionality: fully functional, A used Rautomead RMT 200 is for sale. Hjdpfx Aev Rz Ekod Uofd Inspection on site is possible. More technical details are available upon request.

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Hsdpfjykl Nkox Ad Uofd Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: used, Sheet width: 2500 mm. Plate thickness: 10 mm. Distance between columns: 2700 mm. Hodpfx Asykl I Hod Ujfd Throat: 400 mm. Total power requirement: 20 kW. Weight of the machine: Approximately 10,500 kg. Dimensions: Approximately 3800 x 2200 x 2000 mm. Control type: Typically conventional/manual control.

Condition: like new (used), Year of construction: 1985, operating hours: 200 h, functionality: limited functionality, machine/vehicle number: 38754, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Hodeykl Iaepfx Ad Usfd Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: excellent (used), Year of construction: 2013, load capacity: 340 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2013 (bulk buying discounts available) Condition: Used Cabinet: IRC5 Included Teach Pendant: Included Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. Hfedpfx Adew Nanre Uod

Condition: ready for operation (used), Year of construction: 2006, operating hours: 10,000 h, load capacity: 360 kg, arm reach: 3,076 mm, controller manufacturer: KUKA, controller model: KRC2, teach pendant model: KCP2, The KUKA KR360 L280 is a high-performance 6-axis industrial robot designed for heavy-duty applications. With a 280 kg payload and 3076 mm reach, it is ideal for: Hfedpfext Nawjx Ad Ued Material handling – palletizing, loading/unloading, and large part transfer Welding – precise and stable spot or arc welding of large structures Machining – milling, grinding, and cutting with high rigidity Assembly – handling and positioning of large components Foundry and automotive – suitable for casting, mold handling, and car body assembly Model: KR360 (L280) Payload: 280kg or 360kg Arm Reach: 3076 mm or 2826 mm Condition: Tested Controller Cabinet: KRC2 Year 2004 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 10,000 h, load capacity: 360 kg, arm reach: 3,326 mm, controller manufacturer: KUKA, controller model: KRC2, teach pendant model: KCP2, The KUKA KR360-2 is a high-performance 6-axis industrial robot designed for heavy-duty applications. With a 360 kg payload and 3326 mm reach, it is ideal for: Material handling – palletizing, loading/unloading, and large part transfer Welding – precise and stable spot or arc welding of large structures Machining – milling, grinding, and cutting with high rigidity Hedpfx Ajxt I D Ijd Usfd Assembly – handling and positioning of large components Foundry and automotive – suitable for casting, mold handling, and car body assembly Model: KR360-2 Payload: 360kg Arm Reach: 3326 mm or 2826 mm Condition: Tested & Painted Manipulator: Year 2006 Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: excellent (used), Year of construction: 2011, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16-2 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16-2 (KR16-2 Foundry option is also available) Hsdpfew Idvkox Ad Uefd Condition: Used & Tested Year: 2011 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)"

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 Hsdpowpr Ufjfx Ad Uofd SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE