Top Barfeeder Kft.

Condition: used, Year of construction: 2009, operating hours: 7,515 h, GUIDETTI SINCRO 950 – Cable Granulator, 37 kW Main Motor, Dry Separation Table, and SIMCO Anti-Static System Laedps Abx Idefx Akmsh We offer a used GUIDETTI SINCRO 950 cable recycling machine designed to recover copper through granulation and dry separation of metal from cable insulation. The process combines cable granulation in a knife mill with separation on a vibrating dry separation table. The machine is suitable for cable recycling facilities and non-ferrous metal processing companies. Technical specifications: Manufacturer: GUIDETTI Recycling Systems – Italy. Model: SINCRO 950. Year of manufacture: 2009. Serial number: 9501000025. Machine weight: 3,000 kg. Supply voltage: 400 V. Frequency: 50 Hz. Electrical supply configuration: 3P + PE. Full-load current: 120 A. Marking: CE. Separation method: dry separation on a vibrating table. Main granulator: Main motor power: 37 kW. Rotor diameter: 420 mm. Rotor width: 900 mm. Cutting configuration: three-row V-shaped cutting arrangement. Additional equipment – SIMCO anti-static system: 4 ionising bars installed above the separation table. Bar model: SIMCO P-Sh-N. 2 SIMCO A2A7S high-voltage power units. Power unit supply: 230 V AC, 50 Hz. Bar operating voltage: 7 kV AC. Power unit protection rating: IP54. The SIMCO system neutralises electrostatic charges generated during material processing. It reduces the attraction and adhesion of insulation particles, supporting the separation of plastic from copper. Please contact us for further information or to arrange a viewing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: P02/194, Equipment: CE marking, The machine was completely refurbished between 2020 and 2021, including overhauling the spindle, electrical panel, installing a second filter, touchscreen, PLC, temperature control (solid-state relay), internet access, repainting, etc. Lajdpfx Akjz I Tghemsh The machine is currently in production.

Year of construction: 2003, condition: used, functionality: fully functional, input voltage: 400 V, input current: 85 A, continuous power: 45 kW (61.18 HP), Plastic granulator ESMOS type Balkán, version M 500/800, manufacturer ESMOS, Bulgaria. For size reduction of plastic waste, particle size depending on screen. Technical data (per manufacturer's documentation): – Feed opening: 800 × 500 mm – Knives: 6 rotor knives, 4 stator knives – Drive: electric motor 45 kW, 1475 rpm, V-belts – Power supply: 3 × 400 V / 50 Hz, rated current 85 A, 63 A plug – Throughput: approx. 400–800 kg/h depending on material and screen – Extraction outlet Ø 146 mm, protection IP 54 Laedpfx Aksz I Izgemeh – Weight: 2,750 kg Manufacturer's technical documentation available (see PDF). Condition: in working order. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, power: 35 kW (47.59 HP), shaft diameter: 400 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS Laodpfx Akoz Erbxomeh • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, functionality: fully functional, Copper Granulators Copper Granulators All prices are net prices. - GM-S03: 4,200 Euros - GM-S05: 5,050 Euros - GM-S08: 7,700 Euros - GM-S15: 11,300 Euros Compact and powerful cable recycling machines for the efficient separation of copper and plastic. Capacity, depending on the model: 30–150 kg/h at 4.28–8.5 kW. Ideal for small to medium-sized recycling operations. Image 1 – Cable recycling plants Professional cable recycling machine GM-T500 High-quality system for the efficient processing and separation of cable material. Suitable for various types of cables and industrial applications. Lodpoz Eil Uefx Akmoah GM-T500: Copper wire granulator, up to approximately 300–400 kg/h, 34.15 kW Price: 55,640 Euros net Granulators GM-B200 to GM-D600 Robust machines for the professional shredding and processing of cables and metal materials. Various models with 1.5–11 kW motor power and different throughput and performance sizes. Ideal for recycling operations, cable processing, and industrial applications. Available models as per overview: All prices are net prices. • GM-B200 – 1.5 kW, 400 Nm 3,000 Euros • GM-B300 – 3 kW, 1,628 Nm 4,840 Euros • GM-B400 – 4 kW, 2,919 Nm 6,780 Euros • GM-B500 – 7.5 kW, 4,574 Nm 8,940 Euros • GM-B600 – 11 kW, 8,500 Nm 12,860 Euros • GM-D400 – 2 × 4 kW, 5,800 Nm 8,900 Euros • GM-D500 – 2 × 7.5 kW, 9,148 Nm 12,200 Euros • GM-D600 – 2 × 11 kW, 25,000 Nm 16,520 Euros

Year of construction: 1981, condition: ready for operation (used), functionality: fully functional, empty load weight: 8,300 kg, filling opening length: 600 mm, filling opening width: 430 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Filling opening: 600 × 430 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,700 × 1,600 × 2,800 mm Lsdpfx Ajz Ebdcjkmsah Unladen weight: 8,300 kg Frequency: 50 Hz Voltage: 420 V Motor power: 55 kW Current consumption: 95 A

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW Lsdpfx Aoz Duuxekmeah For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Year of construction: 2007, condition: used, functionality: fully functional, The ELDAN FG952 is an industrial, high-speed, single-shaft granulator designed to further reduce the size of materials after primary shredding, down to a specified granule size. The material is fed into the cutting chamber, where a rotating rotor with moving blades interacts with stationary blades. The granulated material passes through a replaceable screen, allowing for the selection of the desired final fraction size. The unit features an adjustable blade gap, multiple blade sharpening options, easy blade replacement, and a hydraulic opening for the feed hopper, which facilitates access to the cutting chamber during maintenance. Replaceable wear parts and screens with different hole sizes are used. Electric motor power: 75 kW / approximately 100 HP Rotor length: 950 mm Rotor speed: 475 rpm Moving ("flying") blades: 12 pcs. Stationary blades: 4 pcs. Capacity up to 3,500 kg/h Approximate weight 4,400 kg Length: 1,940 mm Width: 1,960 mm Height: 2,800 mm Motor rated speed: 1,480 rpm Standard electrical grid: 3 phases, 400 V, 50 Hz The FG952 can be used to granulate various materials, including: Lajdpfx Akez Dgrvomoh tires and rubber; electrical and other cables; aluminum scrap; plastics; various secondary raw materials after primary shredding.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,500 h, functionality: fully functional, Universal granulator MeWa UG 1600, Drive power: 110 kW, Rotor length: 1600 mm, Hydraulic feed device (HNDE), Control cabinet, Includes discharge conveyor, Wear parts will be replaced. Ljdpez Dcbtsfx Akmoah Available from approximately the end of November 2026.

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal. Ledpfjz A Ti Ejx Akmjah

Condition: new, Year of construction: 2026, total height: 2,000 mm, total width: 1,580 mm, total length: 1,600 mm, overall weight: 2,800 kg, rotor diameter: 350 mm, rotor length: 1,600 mm, sieve perforation: 3 mm, number of blades: 18, rotational speed (max.): 400 rpm, warranty duration: 12 months, power: 30 kW (40.79 HP), MIZAR FGR Series - Industrial Fine Granulator for High-Performance Cable Recycling Superior Granulation for Industrial Waste Processing Mizar Recycling Machinery’s FGR Series granulators deliver high-performance results in industrial waste processing and recycling applications. These fine granulators are precision-engineered to efficiently grind and granulate various scrap materials. Featuring superior crushing capacity and fast processing times, the FGR Series effectively handles challenging materials, including copper cables, plastics, and electronic waste. Built with durable materials and wear-resistant blades, the FGR Series ensures long-lasting, reliable performance. Prioritizing energy efficiency, these machines deliver high processing output with low power consumption, significantly reducing your energy costs. KEY ADVANTAGES & FEATURES • High-Performance Crushing: Superior capacity for fast and effective granulation of scrap materials. • Industrial Durability: Constructed with wear-resistant components and high-grade blades for extended service life. • Energy Efficiency: Optimized design provides maximum throughput with minimal energy consumption. • Safety-First Design: Integrated emergency stop systems and safety applications ensure a secure industrial working environment. • Versatile Applications: Ideal for diverse needs ranging from complete recycling lines to scrap waste management facilities. Lasdpezquy Rofx Akmoh MODEL RANGE & TECHNICAL SPECIFICATIONS • FGR S: Capacity: Up to 400 kg/h | Total Power: 15 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • FGR M: Capacity: Up to 800 kg/h | Total Power: 30 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • FGR L: Capacity: Up to 1,300 kg/h | Total Power: 45 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • FGR XL: Capacity: Up to 2,000 kg/h | Total Power: 75 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to upgrade your industrial recycling capabilities with high-performance granulation? Contact us for a customized quotation, detailed technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Year of construction: 2025, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Silo V2 is most often located between the Rasper and the Granulator. It balances the output from the Rasper the input rate of the Granulator. It has a Silo with vibratory base to control the feed rate. Volume: 2 m3 See specifications in attached document Laodszn Ul Ijpfx Akmoh

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Ljdpfx Aezhifiokmoah Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Lasdpfx Akjzhg Eyjmsh Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 50 kW (67.98 HP), shaft diameter: 800 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. Lsdszg Ikhjpfx Akmoah CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: Lodpfezgx H Hex Akmeah * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Lsdpfxoy N T Uys Akmeah

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Lsdpfx Asy D Ug Tjkmeah Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1988, condition: good (used), Includes discharge screw for transporting the material. Two other smaller grinding mills are also available; if desired, all three can be sold as a package. Laedpfxoyzpx Eo Akmsh

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. Ljdpeyy Rk Tjfx Akmoah • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding Lajdpfxoyy Rk Hs Akmeh • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 135 kW (183.55 HP), load capacity: 800 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. Laodpfx Aksyy Rktjmoh 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES Lasdoyy Ricepfx Akmoh • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, No. 10028 Cable granulation plant FRS BK 60 Used According to our customer, the machine is fully functional and can be inspected and tested on site Cable granulating system for up to approx. 1000 kg of cable per hour (according to our customer) Motor and blades were renewed in 2025 Rotor dimensions 610 x 500 mm 14 blades Motor power 45 kW Incl. magnetic conveyor belt Cylinder size 400 x 120 mm Motor power 1.5 kW Incl. sieve with two outlets Motor power 0.35 kW Installation dimensions approx. 7000 x 6000 mm LW Transport dimensions approx. 6000 x 2400 x 2600 mm LWH Lajdpjxwdndefx Akmjh Weight approx. 6000 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in the description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) Lasdjxm Uf Sspfx Akmjh • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours