Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Dolemhhyasiraqfsut - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2022, Load capacity 150 kg Dusliraqswb R U Ijfjt The crate gripper with rotating device shown here is a completely safe device that not only transports stackable crates gently but also allows them to be emptied while hanging. The gripper is very robust yet very easy to use and complies with the relevant standards and EC directives.

Condition: used, Functionality: fully functional, I am selling a crane consisting of 4 complete bays, while the attached photos show only one bay. The suction cup is also visible on the bays. The crane is currently used for loading sheets with a maximum load capacity of 100 kg. Possibility of buying only parts. Djliraowc Tiwsqfsut

Year of construction: 2021, Condition: as good as new (ex-display), - mobile scissor lift with single scissors - with smooth sheet metal plate WITHOUT push bar - The up/down stroke is actuated by a hydraulic foot pump - Load capacity: 1200 kg Duoliefnnayeraqfst - construction height: 450 mm - effective stroke: 700 mm - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Own weight: 420 kg - 2 swivel castors with brake, 2 fixed castors without brake - Wheel-Ø: 150 mm - Powder coating of base frame and platform frame light grey RAL 7035, scissors in violet blue RAL 5000

Condition: used, Year of construction: 2012, operating hours: 13,735 h, motor manufacturer: Mercedes, Field of application: Internal logistics Djliraqewga Hkofsut Machine type: RoRo terminal tractor Production country: NL Please contact Theo Lelie for more information

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: SSI Schäfer Type: PR 600 Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Crossbeam type: TRV1-270-160-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,400 kg, with evenly distributed load 2x locking pins, used Design: fully galvanized To secure the longitudinal beams against accidental lifting Dujlewa Auksiraqfot Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which will be invoiced separately depending on the delivery location and scope of delivery.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Deliraomhhx Ijqfjut When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2400x1200x410 mm Weight 1300 kg Dslirajvz Haueqfeut Total power requirement 0 kw

Condition: used, Year of construction: 2017, Functionality: fully functional, I sell lattice slats for constructions in production halls with a load capacity of 250 kg per square meter. Dimensions 1000 * 1000 mm and 2000 * 1000. Total available 500 square meters. Price per 1 square meter 35 euros. Dujliraqowc Tbgefet

Condition: new, Year of construction: 2022, operating hours: 39 h, power: 2 kW (2.72 HP), total length: 2,020 mm, wheelbase: 1,300 mm, ground clearance: 10 mm, lifting height: 4,350 mm, free lift: 920 mm, mast type: triplex, fork carriage width: 780 mm, drive type: Elektro, load capacity: 1,600 kg, construction width: 80 mm, net weight: 1,236 kg, · Bedienung Geh/Stand · Batterie min. 201kg max. 260kg · Initialhub 115mm · Nenntragfähigkeit 1600 (2000)kg · Lastschwerpunktabstand 600 mm · Lastabstand 724/646 mm · Achslast mit Last antriebsseitig/lastseitig 979/1850 kg · Achslast ohne Last antriebsseitig/lastseitig 962/268 kg · Bereifung Polyurethan · Reifengröße antriebsseitig mm ⌀ 230 x 90 Dujliovfg A Djraqfet · Reifengröße lastseitig mm ⌀ 85 x 85 (⌀ 85 x 60) · Stützrollengröße mm ⌀ 150 x 50 · Spurweite antriebsseitig/lastseitig 534// 380/500 mm · Höhe Deichselgriff in Fahrstellung min./max. 1175/1380 · mm · Gabelhöhe gesenkt mm 86 · Arbeitsgangbreite bei Palette 800 x 1200 längs 2390 / · 2777 mm · Wenderadius 1507/1894 mm · Fahrgeschwindigkeit mit/ohne Last km/h 4,0/4,0 6,0/6,0 8,0/10,0 · Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 · Senkgeschwindigkeit mit/ohne Last m/s 0,40/0,35 · Max. Steigfähigkeit kB 5 mit/ohne Last %: 10,0/22,0 · Betriebsbremse Elektromagnetisch · Fahrmotor, Leistung S2 = 60 min kW 2,3 · Hubmotor, Leistung bei S3 = 15 % kW 3,2 · Batterie nach DIN 43531/35/36 A, B, C, nein 2PzS · Batteriespannung/Nennkapazität K V/Ah 24/230 · Li-Ion: 24/205 · Batteriegewicht ±5 % (herstellerabhängig) kg 212 · Energieverbrauch nach DIN EN 16796 kWh/h 0,84 · Art der Fahrsteuerung AC-Steuerung · Schalldruckpegel (Fahrerohr) dB(A) ≤66

Condition: excellent (used), Year of construction: 2016, overall weight: 60 kg, inner dimension length: 1,000 mm, inner dimension width: 1,200 mm, inner dimension height: 116 mm, Stackable Duelewd Nbfoiraqfet resealable metal mesh container. With opening size 100/120/x 116 weight 60/70kg Total weight: 70 kg Internal length dimension: 1,200 mm Internal width dimension: 1,000 mm Internal height dimension: 800 mm Useful height: 970 mm m Load capacity: 1,000 kg 15 1,050 € 40 2,600 € 60 3,600 € 90 4,950 € 200 10,000 €

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: SSI Schäfer Type: PR 600 Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 5010 Gentian Blue Box profile: 120 x 50 mm Crossbeam type: TRV1-270-125-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,300 kg, with evenly distributed load Dslijwayvleraqfeut 2x locking pins, used Design: fully galvanized To secure the longitudinal beams against accidental lifting Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Duoliraqed Tbbdofet - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Functionality: fully functional, Year of construction: 2025, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,600 kg, empty load weight: 2,400 kg, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering for sale a new roll-off platform from our own production. The platform has the following features: - Manufactured according to DIN 30722-1 - 50mm diameter support bracket - 1570mm hook height - 6500mm usable area length - Empty weight 2400kg / 12600kg payload - 5mm checker plate floor / 4mm front wall thickness - Solid hook support with surrounding metal sheets - IPN 180 longitudinal beams / reinforced - Outer rollers can be lubricated and replaced - Primed and painted in RAL 7016 / anthracite - C-lock according to DIN - 7 pairs of recessed lashing eyes with a tensile force of 5t each - Perforated strips on each side with 30mm holes - 6 solid and secure inserts for leveling the lanes - 120mm deep lanes - Deepened lanes each approximately 5500mm long 708mm wide - 2 lockable steel storage pockets on the front - 2 lashing rings with a tensile force of 5t each on the inside of the front wall Djliraswfnm Neqfsut - 2 warning markings according to §32 (1) StVO and DIN (German Road Traffic Act) - Incl. type plate and container inspection according to DGUV Rule 114-010 (formerly BGR) - Available immediately Also available in 5.5m and 6m usable area lengths. Nationwide delivery possible for an additional charge! If you are interested in other roll-off container products, we would be delighted to hear from you!

Condition: used, Year of construction: 2017, Functionality: fully functional, total length: 29,220 mm, total height: 4,500 mm, total width: 17,135 mm, I am selling a complete duplex structure, a platform suitable for a production hall, office or warehouse space. It is a fully equipped platform with dimensions of 29220 mm * 17135 mm. The structure is also equipped with stairs and can be customized. Alternatively, an agreement to purchase only parts is possible. Load capacity 250 kg per square meter. Dolirajwc Sxkeqfout

Condition: ready for operation (used), Column-mounted crane, Slewing jib crane, Crane 125 kg, Used machine Manufacturer: Demag Mannesmann Type: PMV12-V2F6 Duolov R Dv Soiraqfet Load capacity: 125 kg Column height: 3800 mm Reach: 1650 mm Electrical data: 220/380V, 2.6A, 50 Hz

Condition: good (used), Year of construction: 2020, operating hours: 14,011 h, mileage: 14,011 km, fuel type: electric, lifting capacity: 2,000 kg, net weight: 1,249 kg, Horizontal order picker STILL comes from 2020 and is in good condition;Capacity of 2,000 kgForks are 2,390 mmBattery is equipped with an external charger and an automatic filling systemWatch the video on YouTube Dolswbf U Ajiraqfjut

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 17,040 mm Number of bays per rack row: 6 Number of levels plus floor level: 6 Technical data for volume: Pallet spaces per bay: 21 Number of pallet spaces per row: 189 Total number of pallet spaces: 189 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,100 kg Scope of delivery includes: 10x pallet rack uprights, used Material color: Sendzimir galvanized Upright type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 12,000 mm Depth: 1,050 mm 108x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Crossbeam type: TRV1-270-160-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,400 kg, with evenly distributed load Djlirswax Iyeaqfout Note: The functionality of the trusses is guaranteed despite the holes. SSI project with heat shields that were screwed in according to the manufacturer's instructions! 216x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: Cracked concrete 20x leveling plates, used Version: complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Dujliraeguk Dksqfst - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), color: green, 6m³ hooklift container | 4 units in total | Price per unit = €1,950 = Further information = Purpose: Construction Dolisv Npn Rjraqfsut Technical condition: Good Visual condition: Good Contact Olivier Geerts or Edwin Geerts for further information.

Condition: ready for operation (used), Column Jib Crane, Swing Crane, 80 kg Crane, Used Machine Load Capacity: 125 kg Column Height: 3800 mm Delsv R Du Ujiraqfout Jib Length / Reach: 1650 mm Chain Hoist: Demag PMV5-V2F6 Load Capacity: 80 kg Electrical Data: 400 V; 0.3 kW; 1.5 A

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 17,040 mm Number of bays per rack row: 6 Number of levels plus floor level: 6 Technical data for volume: Pallet spaces per bay: 21 Number of pallet spaces per row: 126 Total number of pallet spaces: 126 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,100 kg Scope of delivery includes: 7x pallet rack uprights, used Material color: Sendzimir galvanized Upright type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 12,000 mm Depth: 1,100 mm 72x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 120 x 50 mm Crossbeam type: TRV1-270-125-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,300 kg with evenly distributed load Note: The functionality of the trusses is guaranteed despite the holes. SSI project with heat shields that were screwed in according to the manufacturer's instructions! 144x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 28x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x leveling plates, used Design: Complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Duolirewaw H Ieaqfot Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth Dujliomhh Anjraqfst 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Dujlirajguk Dvoqfot - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Dujlomhh Dzeiraqfjt We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.