Used other machinery for sale (734)

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 Lodey D Hy Eopfx Aqvjhg • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: VERBANO TRANSFORMATORI • Type: TTOE (1999) • Rated Power: 57 / 46 / 11.5 – 75 / 60 / 15 MVA Lodpfxjy D Hu Ae Aqvjhg • Rated Voltage: 136 (±8x1.5%) / 11.5 / 15 kV • Rated Current (136 kV side): 242 - 318.4 A • Rated Current (11.5 kV side): 2309 - 3012 A • Rated Current (15 kV side): 442 - 577 A • Cooling system: ONAN/ONAF • OLTC: Yes • OLTC type: ELIN SN 500 LO 750/400/8G Transformer oil regeneration carried out in 2004.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A Lhedpoy D Hrzofx Aqvsg • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA Lsdpfjy D Hp Tex Aqvshg • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Year of construction: 2015, condition: defective spare-parts repository (used), functionality: unexamined, Endurance X29 225kW wind turbine (2015) Lhedpfxoy R S Rco Aqvjg NOTE: Unexamined, advised gearbox issue

Condition: new, Year of construction: 2026, We produce all type of products that are made from stainless steel . Mixing Tanks Storage Tanks Lsdehciakopfx Aqvehg Pasteurizers Cheese Vats Heat Exchangers Capacity range 50-2500 liters . Send an inquiry with a specification so we can make an offer .

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 6131, • Rated power: 52,000 kW • Rated speed: 3,615/1,500 Lhedpfxoy Dq His Aqvog Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended.

Year of construction: 2007, operating hours: 25,300 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 192-237, The LM 6000 gas turbine is a dual rotor aeroderivative turbine connected to a generator via a reduction gear. The nominal power output under ISA conditions is 45 MW. The gas turbine operated exclusively on natural gas. The turbine had run only 25,300 hours before it was sent for factory inspection and conversion at the GE facility. Turbine inspection and PD-PF conversion were completed in 2025. The gas turbine is equipped with the SPRINT system for higher power output at elevated ambient temperatures. Following the PF conversion, the turbine's emission values are compliant with GE standards. Lhedpfx Aqey Dq Dujvjg This set does not include the hydraulic starter, lube oil system, noise hood, air intake systems, or protection and control system!

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Lhjdpfx Aqoxt Dmxoveg Optionally a vacuum cleaner unit can be offered later.

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: complete production line for rotors and stators, including full assembly of the corresponding motors. Some of the brands/models: Promotech, Stihl, etc. Machines on the stator line include: stator core press, stator insulation insertion machine, dispensers for insulating plastic, stator winding machine, machine for cutting excess wire, tab welding machine, stator inspection station. Machines on the rotor line include: rotor core press, rotor insulation insertion machine, commutator press-fitting machine, rotor winding machine, rotor testing (rototest). Lhsdpfxoy Ddrrj Aqvog Additionally: rotor varnishing machine, finishing operations (lathe for commutator and rotor core machining), balancing machine, cutting/sawing machine, rototest. Also includes: assembly line for complete motor assembly, DAKS device for motor testing, conveyor belt, packaging unit. For more pictures, detailed information, or any inquiries, we are at your disposal.

Year of construction: 2019, condition: used, Year: 2019 Condition: Excellent (aș new) Nipping press with inline connection to DGR Binder KM41 Technical details: Pressure max. 25t - Flat-lying transport of the thread-sewn books into the press station Lhodpsy Exbksfx Aqvsg - 2 times pressing at a standstill - Adjustable press force - Adjustable pressing time - Timed feed to the perfect binder - Swiveling feed belt - Individual operation of the thread sewing machine possible - Manual feeding possible

Year of construction: 2011, condition: used, Year of manufacture: May 2011 Lodpfx Aey Iv H Noqvohg Serial number: L177B31996J VERY NICE FORKLIFT HYSTER 2.5 TONS | 12457 HOURS.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Various types of machinery for sale due to company liquidation. Check out my other listings too! . Lhodpfxey Ahirj Aqveg For sale: 3,5m, adjustable speed, indoor, conveyor belt.

Year of construction: 2018, condition: good (used), Parts washing machine, full specifications available in the photos of the listing, model: CBR 60 T. The machine is in very good condition. Price is excluding VAT, invoiced. Lhjdpsy D Afdsfx Aqvjg

Year of construction: 2021, operating hours: 2 h, condition: new, functionality: fully functional, machine/vehicle number: 211 02 24, We offer the following for sale: For sale: GLOBAL Vacuum Presses GGTP-P-3116 Professional membrane vacuum press in excellent, like-new condition. The machine has only been used once and is virtually brand new. This equipment is an ideal choice for furniture manufacturing and woodworking applications: perfect for foil lamination, veneering, and precision pressing of curved and flat surfaces. It features a robust design, reliable operation, and uniform pressure distribution. Key features: - Model: GGTP-P-3116 Professional - Working area: approx. 3100 × 1600 mm - Membrane vacuum technology for precise and even pressing Lhsdpfx Asy Dhr Noqvog - Suitable for applying PVC foil, veneer, and other coatings - Sturdy, industrial-grade construction - Easy to operate Serial number: 2110224 Weight: 640 kg Year of manufacture: 2021 Pressure: 9.9 T/m² Power: 1.5 kW Frequency: 50 Hz Phases/Voltage: 3+N / 380 V Current consumption: 2.2 A If you have any questions or require further information, please send us a message or call us. The machine is ready for immediate use, in as-new condition, and can be tested on site.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: GST07-2M VBR132C12, This offer includes an industrial pump, PUMPS PLP3-4, manufactured in 2015. The pump is designed for robust industrial applications, featuring a maximum flow rate of 20.0 m³/h and a maximum operating pressure of 5.0 bar. It is powered by a 5.5 kW electric motor. The pump is primarily constructed from stainless steel, ensuring durability and corrosion resistance, and is suitable for a wide range of fluids. It is mounted on a sturdy metal base equipped with adjustable feet, enabling stable installation on various surfaces. The pump housing features inlet and outlet ports and Pomac markings on the side, indicating the manufacturer or associated brand. The pump comes with an electric motor that has a protective housing and electrical connections to ensure safe operation. The overall condition of the pump and motor shows evidence of previous use, including some water stains and minor surface wear, typical for industrial equipment. Additional manufacturer technical specifications include the ability to handle viscosities up to 1,000,000 cPs and maximum temperatures up to 140ºC. The pump can process solids up to 60 mm in size, depending on the specific model and screw type. Various connection types are supported, including couplings (DIN11851, DIN11864-1, SMS1145), flanges (EN1092-1, rectangular, DIN11864-2, ANSI), and tri-clamp fittings (ISO2852, DIN32676, DIN11864-3). Shaft sealing options include single or double mechanical seals made from silicon carbide or tungsten, as well as lip seals and O-rings from various elastomers such as EPDM, Viton, NBR, PTFE, and KALREZ, some of which comply with FDA standards. Wetted parts are typically made from AISI 316L stainless steel, with the option of other materials upon request. Surface roughness is maintained below 0.8 micron, with options available for finer finishes. Drive standards include IEC motors with IE2 efficiency, IP55 protection, class F insulation, and PTC sensors, with optional upgrades to IE3 efficiency, ATEX certification, CSA/UL approval, and available decentralized variable speed drives. This pump is well-suited for diverse industrial pumping needs, offering reliable performance with a rugged construction and multiple customization options to meet specific application requirements. Flow rate: 20 m³/h Maximum pressure: 5 bar Motor power: 5.5 kW Lhjdpfx Aoy Am Rbeqvsg

Year of construction: 2023, condition: excellent (used), Invoice: I issue a VAT invoice Brand: unbranded Type: hydraulic pump Model: Type- CBL 50-200/200 Ledpsy Amumsfx Aqvehg Manufacturer code: 2 Packaging condition: no packaging

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Condition: Used Invoice: I issue a VAT invoice Brand: unbranded Type: hydraulic pump Model: Type-CBL 80-200/211 Lodpsy Amr Sofx Aqvehg Manufacturer code: 2 Packaging condition: no packaging

Condition: new, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 71163, - mechanical quick coupler MS21 Ledpfxevuzb To Aqvjhg - Lehnhoff mount - Serial No.: 61901436/20

Condition: used, STC conveyor belt In-feed belt Lsdpfot Sbgyox Aqvjhg Dimensions are in the photo album

Condition: used, STC in-feed conveyor belt Measurements are in the photo album Lhodpfx Aqot Sbg Hjvjg

Year of construction: 2014, condition: used, Good condition feed conveyor belt. Ljdet Ul Elepfx Aqvjhg Dimensions are in the photo's

Year of construction: 2017, condition: used, 90 degree curved conveyor belt Measurements in the photo album Lsdpfx Aot Sbgtoqvohg

Year of construction: 1999, condition: ready for operation (used), Hello, We have a complete container boiler house for sale. Hoval steam boiler with economizer Steam output: 2500kg/h Lsdpjiv Hzvjfx Aqvohg Max pressure: 13Bar Max temperature: 192C Year: 1999 Technical Documentation The control cabinet Modulating Gas Burner Weishaupt Type G30 /2-A Grundfos pumps Feed water tank Water softener Chimney Very good condition Price: EUR 27.000,00 net

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Lsdpfjy Rflysx Aqvjhg Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.