Used other post press machines for sale (311)

Condition: used, Year of construction: 2021, Format: 0x0 Speed: 150 pieces per hour Power: 230 V (A.C.), 50/60 Hz Net Weight: 45 kg Measurements: (LxWxH): 50 x 75 x 35cm Equipment: Mechanical speed: 150 pieces/hour pneumatic drive height adjustable table heating plate for preheating glued bindings Bedeyxqwdepfx Andsww movable plate heated rounding book block thickness of 8-80 mm book block height max. 520 mm

Year of construction: 2015, condition: used, Year: 2015 Condition: fully operational, very good Manual front loading: Bsdoy Tw Rtepfx Andsww - Maximum mechanical speed: 14 cycles/min - Signature size: -max. 510 mm (head to tail) × 550 mm (back to front) -min. 125 mm (head to tail) × 100 mm (back to front) Semi-automatic side loading - Maximum mechanical speed: 16 cycles/min - Signature size: -max. 510 mm (head to tail) × 350 mm (back to front) -min. 125 mm (head to tail) × 100 mm (back to front) Description: The Smyth F-3088 is a semi-automatic book sewing machine with front and side loading, specially designed for short runs and small production batches. It is an ideal solution for print-on-demand book production, single-copy manufacturing, sample production, and oversized books, thanks to its ability to sew extremely large signatures up to 510 × 550 mm (front loading) and 510 × 350 mm (side loading). This feature is especially appreciated in the production of art books, photo albums, record books, and other specialty publications. Easy and fast operation allows quick job changeovers in low-volume bookbinding production. The machine was specifically developed for small and medium-sized jobs with high format variability. Its robust

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Bwsdpfx Ajz D U Hnendsw Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: used, Auction of a Binderhaus R 50! Submitting a bid obligates the bidder to collect the item on time, no later than December 23, 2026! Bwods Agvqxopfx Andew Note: Accessories are provided without warranty. The following applies: "Item purchased as is". The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1999, Format: 1650 mm Equipment: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Gluing line (glue application infrastructure available) 5 glue gun nozzles for 3/4-point gluing, or alternatively for longitudinal seam gluing Cold glue (PVA) Valkomelton gluing system Glue Station / 4-Point ??? 4 GP, 1999 Bwjdpfeyz Acqjx Andow Breaker: Jagenberg, 1999, Separator / Breaker Mosca RO MP2, 2000, Bundler

Condition: used, Year of construction: 1998, Format: 600 x 750 mm Equipment: Max. stacking height 1200 mm Min. stack height 540 mm Platform width 900 mm Platform depth 625 mm Load capacity 500 KG Bwsdpfx Ajy D Tc Tsndow

Year of construction: 2002, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 Schmedt Präzimark Hot Foil Stamping Machine (computer-controlled) Includes several type wheels/font sets. 670-4.3 670-5 E 648-17 pt available January 27 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Bwodpfj Ad I Niex Andsw Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Bwedpfx Anoyxqxbsdjw Equipment: Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Maximum mechanical speed 6,000 cycles/hour

Condition: used, Year of construction: 1994, Format: 166 x 211 mm Equipment: Full Automatic line of High Die Cutter for Cards (Business, Phone, Loyalty, Membership), Labels, tickets ST-18.02 Strip stock feeder SE-18.2 Infeed and Cross Cutter with Automatic Program D-18 Die Cutting Punch Unit with 2 chases PB-18.1 Banding machine with delivery Strip length min./max. : 350/1130 mm Strip width min./max. : 45/180 mm Precut label size min. : 25x45 mm Precut label size max. : 150x180 mm Die cut size min. : 20x41 mm Die cut size max. : 145x175 mm Stack heigh min./max. : 45x125 mm Min. trim per side for die cut : 2 mm Bodpfxjyxqvto Andoww Intermediate trim cut : 3 mm / 22 mm Height of cutting die : 60 - 100 mm Mecanical Speed : 10 - 15 strokes per minute Die Cut Pressure : 4 - 5 Tons Banding machine, width : 25 mm Machine is controled with program and screen Elecrical datas : 380V, 50 Hz, 6.8 KW, 16 Amp. Air supply required : 6 bars dry air (30 - 45 m3/h) incl. 30% reserve Dimensions : 4900 x 3900 mm Weight : 2.400 kg

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Bsdpfx Ajxdxnfsndeww Various printing units/knifes etc, see pictures. Technical details: Book formats: Height: 70 - 170 mm Width: 70 - 115 mm Thickness: 1 - 15 mm Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs

Condition: used, Year of construction: 1996, The equipment detailed here is a Paper Jogger of the type RLE-3-K, manufactured by Knorr in the year 1996. It has a serial number of 6667004 and dimensions of 750 x 850 mm. This unit is currently in stock and located in Germany. The Paper Jogger is designed to handle a maximum format size of 750 x 850 mm with a stack height of 150 mm, and it weighs 300 kg. It requires a power supply of 400 V for operation. Key features of this machine include an air table, the capability to jog to the right or left, an adjustable tilt angle, and adjustable jogging force. These specifications make it a versatile tool for paper handling and alignment tasks. Format: 750 x 850 mm Equipment: Max format: 750 x 850 mm Stack height: 150 mm Weight: 300 kg Power supply: 400 V Air table Possibility of jogging to the right/left Bwedowxm Rajpfx Andjw Adjustable tilt angle Adjustable jogging force

Year of construction: 2010, condition: used, TECHNICAL DATA Materials: • PE • PP • Extra cut • Thermo • Clear and transparent • PET • Suitable for blank materials • Suitable for pre-printed materials with registration marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Center dancer • Web threading mode • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Bwsdpfez R D Ebsx Andsw Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox AdvancedPunch Pro&eWire” wire-binding system. Items for sale: 1x Xerox AdvancedPunch Pro&eWire with the following accessories: Bjdpfx Anszpwt Djdsww Includes A-FN08 (C/Z Folder) Includes A-FN13 (PR Finisher) Includes ZVC-1 (PR Interface Module) Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for proper function Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 1997, Format: 0x0 Equipment: 4 head paper drills Foot control Technical data: Bwedpfoyxqylox Andew Number of drill heads: 4x Drill bit diameter: 3 - 14 mm Drilling distance: 1 - 420 mm Stack height: 50 mm Speed: 680 - 2,900 rpm Power specifications: Frequenz: 50 Hz Machine Voltage: 400V

Condition: used, Year of construction: 1991, Manufacturer Kohmann offers the F-1050 K Window Patcher Machine, produced in 1991. This machine is currently operational in a printshop located in Deutschland. The price for this equipment is available upon request. Notable features include a format of 1020 x 1050 mm. Bjdpfxsyb R Ade Andjww Kohmann, established in 1962, is renowned for its high-quality carton converting machines, including window patching machines and folder gluers. The company has a strong reputation for producing reliable and efficient machinery for the printing and packaging industries1. The F-1050 model is known for its robust design and ease of operation, making it suitable for various window patching applications. It is designed to handle different sizes and types of carton blanks, ensuring precise and efficient window patching Format: 1020 x 1050 mm

Year of construction: 2021, condition: used, Conveyors Bsdpfx Ansxc Iwgodoww Müller Martini K 654.0100 Year: 2021 Description: - Conveyor (180°)

Condition: used, Year of construction: 1993, Format: 750 ?? 1050 mm Equipment: Load capacity max. 600 kg Platform size: approx. 750 ?? 1050 mm Bodpoy Dud Sofx Andjww Power connection: 380 V/50 Hz

Year of construction: 1988, condition: used, Automatic edge gilding machine Ochsner GA Year: 1988 Bede Adptvspfx Andeww Description: Grinding stations Regulation of grindings Brush with exhaust Priming station Gilding station Electric steering and controlling desk

Year of construction: 2015, condition: used, Year: 2015 Condition: good, functional Counter: 3,8M Automatic Wire-O Binding Line with Integrated Calendar Hanger Insertion The RENZ ABL 500 equipped with the KAS 300 IL unit is a professional industrial solution for the fully automatic production of calendars, brochures, catalogues and other Wire-O bound products. Thanks to its high productivity, fast job changeover and precise automation, it is one of the most efficient systems in its class and is ideally suited for commercial printing companies, bookbinding facilities and calendar manufacturers requiring maximum production quality and efficiency. Configuration - RENZ ABL 500 Bedpfx Aozm T Sqjndoww - KAS 300 IL – Integrated Automatic Calendar Hanger Insertion Unit - Tooling: - 1/4" - 5/16" Features - Fully automatic double-loop Wire-O binding - Automatic feeding of pre-collated punched book blocks - High-precision automatic wire closing - Automatic insertion of calendar hangers using the integrated KAS 300 IL unit - Fast format changeover via touchscreen control - High production capacity of up to 2,000 finished products per hour - Reliable operation designed for continuous industrial production - Robust construction ensuring long service life and low operating costs Technical Specifications - Maximum binding width: 500 mm - Minimum binding width: 70 mm - Maximum book thickness: 15 mm - Wire diameter: 5.5–19 mm (3/16"–3/4") - Wire pitch: 3:1 and 2:1 - Mechanical speed: 2,100 cycles/hour - Production output: Up to 2,000 bound products/hour - Format changeover time: Approx. 3 minutes - Closing bar changeover: Approx. 20 minutes - Power supply: 3/N/PE 400/230 V, 50 Hz - Installed power: 3.5 kW - Required compressed air pressure: 7.5 bar - Compressed air consumption: Approx. 450 l/min - Machine dimensions (L × W × H): Approx. 3,300 × 2,300 × 1,600 mm - Machine weight: Approx. 1,300 kg KAS 300 IL Calendar Hanger Insertion Unit The integrated KAS 300 IL unit automatically feeds, forms and inserts calendar hangers during the production process. It processes straight wire lengths from 80 to 300 mm and operates in perfect synchronization with the ABL 500 binding line. This enables the production of fully finished calendars ready for packaging without any additional manual operations. Applications: The machine is ideally suited for the production of: - Wall calendars - Desk calendars - Catalogues - Brochures - Manuals - Presentation materials - Sample books - Notebooks and other Wire-O bound printed products

Condition: used, Year of construction: 1997, Format: 800 x 600 mm Bsdsyg Nhcjpfx Andoww Equipment: Good condition without any damage

Condition: used, Year of construction: 2008, Format: 355 x 760 mm Max. Paper Thickness: NULL Power: 230 V / 50 Hz / 10 A Net Weight: 230 kg Measurements: (LxWxH):77 x 122 x 117cm Equipment: Technical data: Minimum envelope size: 100 x 216 mm Maximum envelope size: 355 x 760 mm Sensor-Driven Automatic Setting Two-Stroke Case Completion Integrated Rubber Matrix Roller Pressing Touchscreen Interface (UI) Single-Operator Design Supported Spine Width Capacity: Smoothly adjusts from 6.4 mm up to 82 mm thick. Allowable Board Thickness: Formatted for rigid cardboard ranges from 1.5 mm to 3.5 mm thick. 200 to 220 finished hardcases per hour Bodeyxqv Tjpfx Andjww

Year of construction: 2020, condition: used, SCS AUTOMABERG TRIM & PERF year 2020 Universal machine for die cut, trim, split, cut, perforate or punch of products. Excluding cutting tools For inline production. Technical specifications: Bsdpfxoyr Eh Ns Andoww mechanical speed: up to 9.000 cycles/h size range untrimmed max.: 500 x 600 mm size range untrimmed min.: 50 x 50 mm product thickness standard max.: 4 mm

Condition: good (used), Bramidan MC16 baler for waste paper Machine in perfect condition, like new. Bwodpsz S Uniofx Andew Purchased from storage; practically unused. Ideal for baling paper, waste paper, PET, plastic film, clothing, general waste, etc. Description: – Compact design, requiring minimal workspace – Bale weight: 250 kg – Large top-loading opening for waste – Two-chamber system – Intuitive control panel – Automatic piston return after the compression cycle – Maintenance-free hydraulic system – Easy bale removal thanks to an integrated ejection system – Bale-tying system Power supply: 380V, 50 Hz Pressing force: 16t Max. bale dimensions: 1100 x 800 x 700 mm External dimensions: 2540 x 1210 x 2570 mm Power: 4 kW Weight: 1220 kg Made in Denmark.

Year of construction: 2001, condition: used, Schmedt PräLeg HHS 1805 Book Mounting Machine Suitable for mounting hardcover books, library bindings, and photo albums. Format range up to 450 × 450 mm Block thickness up to 80 mm Output up to 300 books per hour Bwjdpfj Ad I Ryox Andjw 230 V Compressed air 6 bar Available January 27

Year of construction: 2017, condition: used, offer consists of: Bwedpfxjzwlzls Andsw short delivery unit SC-200 - weight: 18kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs